DL4934-13-F

SPICE MODELS: DL4933 DL4934 DL4935 DL4936 DL4937 DL4933 - DL4937 1.0A SURFACE MOUNT FAST RECOVERY RECTIFIER Features · · · · · Glass Passivated Junction Low Leakage Current A Low Forward Voltage Drop High Current Capability B Available in Lead Free Finish/RoHS Compliant Version (Note 3) C Mechanical Data · · MELF Case: MELF Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · Terminals: Solderable per MIL-STD-202, Method 208 · Also Available in Lead Free Plating (Matte Tin Finish). Please see Ordering Information, Note 4, on Page 2 · · · Polarity: Cathode Band Dim Min Max A 4.80 5.20 B 2.60 2.64 C 0.55 Nominal All Dimensions in mm Approx Weight: 0.25 grams Marking: Cathode Band Only Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Current @ TT = 75°C Symbol DL4933 DL4934 DL4935 DL4936 DL4937 Units VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 1.0 A Peak Forward Surge Current 8.3 ms half sine-wave superimposed on rated load IFSM 30 A Maximum Instantaneous Forward Voltage @ IF = 1.0A VFM 1.2 V Maximum DC Reverse Current at Rated Blocking Voltage IRM 5.0 mA Maximum Full Load Reverse Current Full Cycle Average @ TT = 55°C IR 100 mA Maximum Reverse Recovery Time (Note 1) trr 200 ns Typical Total Capacitance (Note 2) CT 15 pF Tj, TSTG -65 to +150 °C Operating and Storage Temperature Range Notes: 1. Reverse Recovery Test Conditions: IF =1.0A, VR =30V, di/dt = 50 A/ms. 2. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS15001 Rev. 5 - 2 1 of 2 www.diodes.com DL4933-DL4937 ã Diodes Incorporated IO, AVERAGE FORWARD RECTIFIED CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 10 1.0 Tj = 25ºC Pulse Width = 300 ms 0.1 0.01 0.6 0.8 1.0 1.4 1.2 1.0 0.8 0.6 0.4 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0.2 0 25 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 50 75 100 125 150 175 200 TT, TERMINAL TEMPERATURE (ºC) Fig. 2 Forward Derating Curve Tj = 150ºC Pulse Width 8.3 ms Single Half Sine-Wave CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 100 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Fwd Surge Current vs Number of Cycles at 60 Hz Ordering Information Note: Tj = 25ºC f = 1MHz 10 1 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs Reverse Voltage (Note 4) Device Packaging Shipping DL4933-13 MELF 5,000/Tape & Reel DL4934-13 MELF 5,000/Tape & Reel DL4935-13 MELF 5,000/Tape & Reel DL4936-13 MELF 5,000/Tape & Reel DL4937-13 MELF 5,000/Tape & Reel 4. For Lead Free Finish/RoHS Compliant version part number, please add "-F" suffix to the part number above. Example: DL4935-13-F. DS15001 Rev. 5 - 2 2 of 2 www.diodes.com DL4933-DL4937