DMP3025LK3-13

A Product Line of Diodes Incorporated DISCONTINUED DMP3025LK3 30V P-CHANNEL ENHANCEMENT MODE MOSFET Product Summary V(BR)DSS Features and Benefits ID RDS(on) TA = 25°C 25mΩ @ VGS= -10V -16.1A 41mΩ @ VGS= -4.5V -12.5A • Low on-resistance • Fast switching speed • “Green” component and RoHS compliant (Note 1) -30V Mechanical Data • Case: TO252-3L Description and Applications • This new generation MOSFET has been designed to minimize the onstate resistance (RDS(on)) and yet maintain superior switching performance, making it ideal for high efficiency power management applications. Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 (Note 1) • Moisture Sensitivity: Level 1 per J-STD-020D • Terminals Connections: See Diagram • Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 • Backlighting • Marking Information: See Below • DC-DC Converters • • Ordering Information: See Below Power management functions • Weight: 0.33 grams (approximate) D D G Top View Ordering Information Note: S Equivalent Circuit Pin Out -Top View (Note 1) Product Marking Reel size (inches) Tape width (mm) Quantity per reel DMP3025LK3-13 P3025L 13 16 2,500 1. Diodes, Inc. defines “Green” products as those which are Eu RoHS compliant and contain no halogens or antimony compounds; further information about Diodes Inc.’s “Green” Policy can be found on our website. For packaging details, go to our website. Marking Information YYWW P3025L DMP3025LK3 Document Revision: 1 = Manufacturer’s Marking P3025L = Product Type Marking Code YYWW = Date Code Marking YY = Year (ex: 09 = 2009) WW = Week (01-52) 1 of 8 www.diodes.com May 2013 © Diodes Incorporated DISCONTINUED A Product Line of Diodes Incorporated DMP3025LK3 Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Symbol VDSS VGS Drain-Source voltage Gate-Source voltage Continuous Drain current VGS = 10V Pulsed Drain current VGS= 10V Continuous Source current (Body diode) Pulsed Source current (Body diode) (Note 3) TA=70°C (Note 3) (Note 2) (Note 4) (Note 3) (Note 4) ID IDM IS ISM Value -30 ±20 -16.1 -12.9 -10.6 -41.9 -12.6 -41.9 Unit V V Value 4.3 34.5 10.0 80.0 2.15 17.2 29.0 12.5 58.0 1.02 -55 to 150 Unit A A A A Thermal Characteristics @TA = 25°C unless otherwise specified Characteristic Symbol (Note 2) Power dissipation Linear derating factor (Note 3) PD (Note 5) Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and storage temperature range Notes: (Note 2) (Note 3) (Note 5) (Note 6) RθJA RθJL TJ, TSTG W mW/°C °C/W °C 2. For a device surface mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 3. Same as note 2, except the device is measured at t ≤ 10 sec. 4. Same as note 2, except the device is pulsed with D = 0.02 and pulse width 300 µs. The pulse current is limited by the maximum junction temperature. 5. For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 6. Thermal resistance from junction to solder-point (at the end of the drain lead). DMP3025LK3 Document Revision: 1 2 of 8 www.diodes.com May 2013 © Diodes Incorporated A Product Line of Diodes Incorporated DISCONTINUED + DMP3025LK3 Thermal Characteristics RDS(on) 1 DC -ID Drain Current (A) -ID Drain Current (A) RDS(on) 10 Limit 1s 100ms 100m 10m 100m 1ms 100µs 1 10 0.1 1 10 30 Tamb=25°C 25mm x 25mm 1oz FR4 40 D=0.5 30 D=0.1 D=0.2 D=0.05 10 Single Pulse 0 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Thermal Resistance (°C/W) Thermal Resistance (°C/W) Single Pulse Tamb=25°C 100 50mm x 50mm 2oz FR4 10 25mm x 25mm 1oz FR4 1 100µ 1m 10m 100m 1 10 100 Pulse Width (s) 25 Tamb=25°C 50mm x 50mm 2oz FR4 20 D=0.5 15 10 D=0.1 D=0.2 D=0.05 5 0 100µ 1m Single Pulse 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance 1k Max Power Dissipation (W) Max Power Dissipation (W) 100µs Safe Operating Area Transient Thermal Impedance 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 50mm x 50mm 2oz FR4 25mm x 25mm 1oz FR4 0 Pulse Power Dissipation Document Revision: 1 1ms -VDS Drain-Source Voltage (V) 60 DMP3025LK3 10ms Tamb=25°C 50mm x 50mm 2oz FR4 10m Safe Operating Area 20 1s 100ms -VDS Drain-Source Voltage (V) 50 DC 1 100m 10ms Tamb=25°C 25mm x 25mm 1oz FR4 10 Limit 20 40 60 80 100 120 140 160 Temperature (°C) Derating Curve 3 of 8 www.diodes.com May 2013 © Diodes Incorporated A Product Line of Diodes Incorporated DISCONTINUED DMP3025LK3 Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Symbol Min Typ Max Unit Test Condition Drain-Source Breakdown Voltage BVDSS -30   V Zero Gate Voltage Drain Current IDSS   -0.5 µA VDS= -30V, VGS= 0V Gate-Source Leakage IGSS   ±100 nA VGS= ±20V, VDS= 0V VGS(th) -1.0  -3.0 V ID= -250µA, VDS= VGS ID = -250µA, VGS= 0V ON CHARACTERISTICS Gate Threshold Voltage VGS= -10V, ID= -7.1A RDS (ON)  Forward Transconductance (Notes 7 & 8) gfs  18.6  S VDS= -15V, ID= -7.1A Diode Forward Voltage (Note 7) VSD  -0.80 -1.2 V IS= -1.7A, VGS= 0V Static Drain-Source On-Resistance (Note 7)  0.025 0.041 • Reverse recovery time (Note 8) trr 16.2  ns Reverse recovery charge (Note 8) Qrr  10  nC Input Capacitance Ciss  1678  pF Output Capacitance Coss  303  pF Reverse Transfer Capacitance Crss  178  pF Total Gate Charge Qg  16.5  nC Total Gate Charge Qg  31.6  nC Gate-Source Charge Qgs  4.3  nC Gate-Drain Charge Qgd  6.2  nC Turn-On Delay Time (Note 9) tD(on)  3.5  ns VGS= -4.5V, ID= -5.5A IS= -2.2A, di/dt= 100A/µs DYNAMIC CHARACTERISTICS (Note 8) Turn-On Rise Time (Note 9) tr  4.9  ns Turn-Off Delay Time (Note 9) tD(off)  44  ns tf  23  ns Turn-Off Fall Time (Note 9) Notes: VDS= -15V, VGS= 0V f= 1MHz VGS= -4.5V VGS= -10V VDS= -15V, ID= -7.1A VDD= -15V, VGS= -10V ID= -1A, RG ≅ 6.0Ω 7. Measured under pulsed conditions. Pulse width ≤ 300µs; duty cycle ≤ 2% 8. For design aid only, not subject to production testing. 9. Switching characteristics are independent of operating junction temperatures. DMP3025LK3 Document Revision: 1 4 of 8 www.diodes.com May 2013 © Diodes Incorporated A Product Line of Diodes Incorporated DISCONTINUED DMP3025LK3 Typical Characteristics T = 150°C 3.5V 4.5V -ID Drain Current (A) -ID Drain Current (A) 10V 3V 10 2.5V 1 VGS T = 25°C 0.1 0.1 1 1 2V 0.1 VGS 0.1 1 Output Characteristics 1 T = 25°C -VGS Gate-Source Voltage (V) RDS(on) Drain-Source On-Resistance (Ω) Typical Transfer Characteristics DMP3025LK3 Document Revision: 1 10 T = 25°C VGS 2.5V 3V 1 3.5V 0.1 4V 10V 0.01 0.1 1 10 -ID Drain Current (A) On-Resistance v Drain Current 3 VGS = 10V ID = 7.1A 1.4 RDS(on) 1.2 1.0 0.8 VGS = VDS ID = 250uA 0.6 0.4 -50 0 50 VGS(th) 100 Tj Junction Temperature (°C) 150 Normalised Curves v Temperature -ISD Reverse Drain Current (A) -ID Drain Current (A) T = 150°C Normalised RDS(on) and VGS(th) 1.6 VDS = 10V 2 10 -VDS Drain-Source Voltage (V) Output Characteristics 0.1 3V 2.5V -VDS Drain-Source Voltage (V) 10 3.5V 10 0.01 10 10V 10 1 T = 150°C T = 25°C 0.1 0.01 Vgs = 0V 1E-3 0.2 0.4 0.6 0.8 -VSD Source-Drain Voltage (V) Source-Drain Diode Forward Voltage 5 of 8 www.diodes.com 1.0 May 2013 © Diodes Incorporated A Product Line of Diodes Incorporated DISCONTINUED DMP3025LK3 Typical Characteristics - continued VGS = 0V f = 1MHz 2000 1500 CISS COSS 1000 CRSS 500 0 1 10 -VDS - Drain - Source Voltage (V) Capacitance v Drain-Source Voltage -VGS Gate-Source Voltage (V) C Capacitance (pF) 2500 10 9 8 7 6 5 4 3 2 1 0 ID = 7.1A VDS = 15V 0 5 10 15 20 25 30 Q - Charge (nC) Gate-Source Voltage v Gate Charge 35 Test Circuits DMP3025LK3 Document Revision: 1 6 of 8 www.diodes.com May 2013 © Diodes Incorporated A Product Line of Diodes Incorporated DISCONTINUED DMP3025LK3 Package Outline Dimensions DIM Inches Millimeters DIM Inches Min Max Min Max A 0.086 0.094 2.18 2.39 e A1 - 0.005 - 0.127 H 0.370 0.410 9.40 10.41 b 0.020 0.035 0.508 0.89 L 0.055 0.070 1.40 1.78 b2 0.030 0.045 0.762 1.14 L1 0.108 REF 2.74 REF b3 0.205 0.215 5.21 5.46 L2 0.020 BSC 0.508 BSC c 0.018 0.024 0.457 0.61 L3 0.035 0.065 0.89 1.65 c2 0.018 0.023 0.457 0.584 L4 0.025 0.040 0.635 1.016 D 0.213 0.245 5.41 6.22 L5 0.045 0.060 1.14 1.52 D1 0.205 - 5.21 - • 1° 0° 10° 0° 10° E 0.250 0.265 6.35 6.73 •° 0° 15° 0° 15° E1 0.170 - 4.32 - - - - - - DMP3025LK3 Document Revision: 1 Min Millimeters 7 of 8 www.diodes.com Max Min 0.090 BSC Max 2.29 BSC May 2013 © Diodes Incorporated DISCONTINUED A Product Line of Diodes Incorporated DMP3025LK3 Suggested Pad Layout IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. B. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com DMP3025LK3 Document Revision: 1 8 of 8 www.diodes.com May 2013 © Diodes Incorporated