FN1000064

FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series FN 3.3V CMOS Low Jitter XO Actual Size = 5 x 7mm Product Features Packaging Outline • Less than 1.5 ps RMS jitter with non-PLL design Pin Functions • 3.3V CMOS/TTL compatible logic levels • Pin-compatible with standard 5x7mm packages • Designed for standard reflow and washing techniques 7mm • Low power standby mode • Pb-free and RoHS/Green compliant Pin Function 1 OE Function 2 Ground 3 Clock Output 4 V DD 5mm Product Description The FN Series includes a 3.3V crystal clock oscillator that achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 5x7mm surface-mount ceramic package. Applications New Part Number Example FN 750 0001 A = ProductFamily B = FrequencyCode C = SpecificationCode Note: After July 1, 2007, a Saronix - eCera part number following the above format will be assigned upon confirmation of exact customer requirements. The FN Series is an ideal reference clock for applications requiring low jitter or tight stability, including: • Ethernet • FibreChannel Legacy Ordering Information (for reference only) • Serial Attached SCSI (SAS) • Server & Storage platforms • SONET/SDH linecards • T1/E1, T3/E3 linecards • DSLAM • 802.11a/b/g WiFi S 1613 B - 75.0000 (T) SaRonix Product Series Frequency Stability *AA = ±20 ppM (-10 to +70 °C) *A = ±25 ppM (-10 to +70 °C) B = ±50 ppM (-10 to +70 °C) **E = ±50 ppM (-40 to +85°C) Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged Output Frequency (MHz) Note: Recommend S1613XP Series for applications 100 MHz and higher * Availability varies by frequency. SaRonix-eCera™ is a Pericom® Semiconductor Corporation company • 1-800-435-2336 • www.pericom.com/saronix 1 All specifications are subject to change without notice. DS 223 Rev G | 07/05/07 3.3V CMOS Low Jitter XO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series Electrical Performance Parameter Min. Output frequency 1.544 Supply voltage +2.97 Typ. +3.3 Max. Units 156.25 MHz +3.63 V Notes As specified 15 25 Supply current, output enabled 40 1.544 to 32 MHz >32 to 50 MHz mA >50 to 80 MHz 55 Supply current, standby mode Frequency stability Operating temperature 10 μA ±20 to ±50 ppM +85 °C 10% V DD V -40 Output logic 0, VOL Output logic 1, VOH 90% V DD Output load >80 to 156.25 MHz Output Hi-Z See Note 1 below As specified V 15 pF (max) or 10 LSTTL Duty cycle (1.544 to 80 MHz) 45 55 % -40 to +85°C measured 50%VDD Duty cycle (>80 to 156.25 MHz) 45 55 % -10 to +70°C measured 50%VDD Duty cycle (>80 to 156.25 MHz) 40 60 % -40 to-10°C, +70 to +85°C measured 50%VDD ns measured 20/80% of waveform up to 50 MHz 7 >50 to 80 MHz 5 >80 to 125 MHz 3 >125 to 156.25 MHz 2 Rise and fall time up to 80 MHz Jitter, Phase 1.5 >80 to 156.25 MHz 1 Jitter, Accumulated up to 80 MHz 5 >80 to 156.25 MHz 3 Jitter, Total up to 80 MHz 50 >80 to 156.25 MHz 30 ps RMS (1-σ) 10kHz to 20 MHz frequency band ps RMS (1-σ) 20.000 adjacent periods ps pk-pk 100.000 random periods Notes: 1. 2. As specified. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. For specifications other than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Max. 2.2 Input voltage (pin 1), Output Disable (low power standby) Internal pullup resistance Typ. 0.8 50 Units Notes V or open V Output is Hi-Z kΩ Output disable delay 100 ns Output enable delay 10 ms SaRonix-eCera™ is a Pericom® Semiconductor Corporation company • 1-800-435-2336 • www.pericom.com/saronix 2 All specifications are subject to change without notice. DS 223 Rev D | 07/05/07 FN 3.3V CMOS Low Jitter XO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series Typical Accumulated Jitter Typical Output Waveform (75 MHz output) SaRonix-eCera™ is a Pericom® Semiconductor Corporation company • 1-800-435-2336 • www.pericom.com/saronix 3 All specifications are subject to change without notice. DS 223 Rev D | 07/05/07 FN 3.3V CMOS Low Jitter XO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series Absolute Maximum Ratings Parameter Min. Storage temperature -55 Typ. Max. Units +125 °C Notes Test Circuit Test Point 4 Power Supply 0.1μF or 0.01μF 3 1 15 pF (Including probe and fixture capacitance) 2 Output Enable / Disable Function Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCera™ is a Pericom® Semiconductor Corporation company • 1-800-435-2336 • www.pericom.com/saronix 4 All specifications are subject to change without notice. DS 223 Rev D | 07/05/07 FN 3.3V CMOS Low Jitter XO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series Output Waveform tf tr VOH 80% 50% 20% VOL tA tB Duty cycle = 100% x (tA) / (tA + tB) Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature – °C 1 to 3°C/sec max 260 Peak 260°C for 10 sec max 1 to 3°C/sec 217 Time 60 to 90 sec 4 to 6 minutes max SaRonix-eCera™ is a Pericom® Semiconductor Corporation company • 1-800-435-2336 • www.pericom.com/saronix 5 All specifications are subject to change without notice. DS 223 Rev D | 07/05/07 FN 3.3V CMOS Low Jitter XO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series Mechanical Drawings     Recommended Land Pattern* *External high-frequency power decoupling is recommended.(see test circuit for minimum recommendation). To ensure optimal performance, do not route traces beneath the package. Scale: None. Dimensions are in mm/inches. SaRonix-eCera™ is a Pericom® Semiconductor Corporation company • 1-800-435-2336 • www.pericom.com/saronix 6 All specifications are subject to change without notice. DS 223 Rev D | 07/05/07 FN