FNC500131

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 125.000000 MHz NOMINAL FREQUENCY PRODUCT TYPE TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) FNC500131 CUSTOMER P/N 0 January 19, 2011 ISSUE DATE D VERSION APPROVED PREPARED QA AVL Status APPROVED BY CUSTOMER： Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev. E *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant Page i TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 VERSION HISTORY Version Date A Aug.19,2009 Initial Release B May.24,2010 Change Output Wave form TR/TF to TF/TR Position C Jul.10,2010 Change Logo D Jan.19,2011 Revised format E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Version No. Description Notes Page ii TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 ELECTRICAL SPECIFICATIONS SRe Part Number : Item FNC500131 Symbol Specifications Units Nominal Frequency Fo 125.000000 MHz Frequency Stability FT ± 50 ppm Operating Temperature Range TR -40 to +85 °C Supply Voltage VDD +3.3 ± 10.0% V Logic Type LT LVCMOS Supply Current, Output Enabled IDD/OE 55 mA Max. Supply Current, Output Disabled IDD/OD 10 µA Max. Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 3 ns Max. measured 20/80% of Waveform Output Voltage "0" Level VOL 10% VDD V Max. Output Voltage "1" Level VOH 90% VDD V Min. Output Load CL 15 pF Max Jitter, Phase RMS(1-σ) 1 ps Max, 12KHz ~ 20MHz Frequency Band Jitter, Accumulated RMS(1-σ) 3 ps Max, 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 30 ps Max, 100,000 Random Periods -55°C to +125°C °C Rise / Fall Time Storage Temperature Range Notes **See note ※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (1 year at 25°C Average Effective Ambient Temperature), Shock and Vibration. Output Enable / Disable Function Parameter Input Voltage (Pin1), Output Enable Min. Max. 0.3VDD Input Voltage (Pin1), Output Disable (low power standby) Internal Pullup Resistance Typ. 0.7VDD 30 V Or Open V Output is Hi-Z KΩ Output Disable Delay 200 ns Output Enable Delay 2 ms E0-R-4-014 Rev. E Notes Units Page 1 TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 TEST CIRCUIT OUTPUT WAVEFORM E0-R-4-014 Rev. E Page 2 TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 RELIABILITY SPECIFICATIONS ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: Pb - free and RoHS Compliant. MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf E0-R-4-014 Rev. E Page 3 TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 MARKING Logo Dot denotes Pin #1 SRe 125.000 Frequency Code EK ywwv Date & Factory Code E K y ww v PIN #1 Connection Model Series Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale:None. Dimensions are in mm.) E0-R-4-014 Rev. E Pin Function 1 OE 2 Ground 3 Clock Output 4 VDD Page 4 TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 TAPE&REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. E Page 5 TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR FNC500131 VER. D 19-Jan-11 PACKING Begin Start End 1000pcs-Product Tape Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. E Page 6