FR107-T

FR106 / FR107 1.0A FAST RECOVERY RECTIFIER NOT RECOMMENDED FOR NEW DESIGNS, PLEASE USE PR1006G - PR1007G Features · · · · Plastic Package: UL Flammability Classification Rating 94V-0 Capable of Meeting the Environmental Tests in MIL-STD-750C High Reliability and Low Leakage Fast Switching for High Efficiency B A A C D Mechanical Data · · · · · DO-41 Case: DO-41, Molded Plastic Terminals: Axial Lead, Solderable per MIL-STD-202, Method 208 Mounting Position: Any Polarity: Cathode Band Weight: 0.35 grams (approx.) Dim Min A 25.4 ¾ B 4.1 5.2 C 0.71 0.86 2.0 2.7 D Max All Dimensions in mm Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. Characteristic Symbol FR106 FR107 Maximum Recurrent Peak Reverse Voltage VRRM 800 1000 V Maximum RMS Voltage VRSM 560 700 V Maximum DC Blocking Voltage VDC 800 1000 V Maximum Average Forward Rectified Current 9.5mm Lead Lengths @ TA = 75°C Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Unit I(AV) 1.0 A IFSM 30 A VF 1.3 V IR 5.0 100 mA (Note 1) RqJA 50 °C/W Typical Junction Capacitance (Note 2) CJ Maximum Reverse Recovery Time (Note 3) Trr Maximum Forward Voltage at 1.0A Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance Storage and Operating Temperature Notes: @ TA = 25°C @ TA = 100°C TJ, TSTG 15 250 pF 500 -65 to +175 ns °C 1. Thermal Resistance from Junction to Ambient PC Board Mounting, 9.5mm Lead Length. 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 3. Measured with IF= 0.5A, IR=1.0A, IRR=.25A DS26001 Rev. 5 - 3 1 of 2 www.diodes.com FR106 / FR107 ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Single Phase Half Wave 60Hz Resistive or Inductive Load 9.5mm Lead Lengths 0 20 40 60 80 100 120 140 160 180 4.0 1.0 0.1 0.01 0.6 TA, AMBIENT TEMPERATURE (°C) Fig. 1, Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) CJ, JUNCTION CAPACITANCE (pF) TJ = 25°C 10 1 10 DS26001 Rev. Rev. 5 - 3 1.2 1.4 1.6 35 30 25 20 15 10 5 8.3ms Single Half Sine-Wave JEDEC Method 0 1 100 VR, REVERSE VOLTAGE (V) Fig. 3, Typical Junction Capacitance 1.0 VF, INSTANTANEOUS FWD VOLTAGE (V) Fig. 2, Typical Forward Characteristics 20 1 0.8 10 100 NUMBER OF CYCLES AT 60Hz Fig. 4, Max Non-Repetitive Peak Forward Surge Current 2 of 2 www.diodes.com FR106 / FR107