G13270009

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 32.768 KHz NOMINAL FREQUENCY PRODUCT TYPE TYPE G1 TUNING FORK X'TAL SPEC. NO. ( P/N ) G13270009 CUSTOMER P/N Jun.24,2011 ISSUE DATE A VERSION APPROVED PREPARED QA AVL Status APPROVED BY CUSTOMER： Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev. E *RoHS Exception *HF-Halogen Free *REACH Compliant Page i TYPE G1 TUNING FORK X'TAL G13270009 VER. A 24-Jun-11 VERSION HISTORY Version No. Version Date A Jun.24,2011 E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Description Notes Initial Release Page ii TYPE G1 TUNING FORK X'TAL G13270009 VER. A 24-Jun-11 ELECTRICAL SPECIFICATIONS SRe Part Number : G13270009 Parameters Symbol Specifications Units Nominal Frequency Fn 32.768 KHz Mode of Oscillation MO Fundamental Load Capacitance CL 12.5 pF ± 20 ppm Calibration Tolerance Notes +2o X-Cut Typical at 25℃ ± 5℃ Operating Temperature Range TR -40~85 °C Drive Level DL 1 μW Max. ESR 35 KΩ Max. C0 1.6 pF Typical K -0.035 Equivalent Series Resistance Shunt Capacitance C0 Temperature Coefficient 2 ppm/°C Typical Aging ±3 ppm Max 1st year Insulation Resistance 500 MΩ at DC 100V ± 15V Reliability ( Mechanical and Environmental Endurance ) No. 1 Test Items Vibration Test Method and Condition Requirements (1) Vibration Frequency: 10 to 55Hz Frequency Change: ±10ppm Max. (2) Vibration Amplitude: 1.5mm Resistance Change: 5kohm Max. (3) Cycle Time: 1-2min(10-55-10Hz) (4) Direction: X.Y.Z (5) Duration: 2h/each direction 2 3 Shock Leakage 3 Times free drop from 75cm height to hard wooden Frequency Change: ±10ppm Max. board of thickness more than 30mm Resistance Change: 5kohm Max. Put crystal units into a hermetic container and Leakage: 1x10¯8Pa·m1/s Max. Helium for 0.5-0.6Mpa, and keep it for 1h; Check the leakage by a Helium leak detector E0-R-4-014 Rev. E Page 1 TYPE G1 TUNING FORK X'TAL G13270009 4 VER. A Lead Strength The crystal lead with the 0.9kg(9N) power (keep it for The crystal lead is not abnormity (DIP) 30s±5s) and bend the crystal lead 90° with 0.45kg 24-Jun-11 power and two times （which you want to bend should be more than 1.5mm from the case) 5 High Temperature The crystal units shall be put in somewhere for 2 hrs Endurance Frequency Change: ±10ppm Max. at temperature of 85℃±2℃, then keep it for 1 to 2 hrs Resistance Change: 5kohm Max. under room temperature. 6 Low Temperature The crystal units shall be put in somewhere for 2 hrs Endurance at temperature of -25℃, then keep it for 1 to 2 hrs under room temperature. 7 Humidity The crystal units shall be put in somewhere at 40℃ Endurance in relative humidity of 90-95% for 48 hrs, then keep it for one or two hours under room temperature. 8 Temperature Temperature shift from low(-40℃) to high(100℃, keep Cycle 30 mins), satisfy high(100℃) to low(-40℃, keep 30 mins), then go up to room temperature for 5 cycles. 9 Salt Spray Test Put the crystal units in the salt spray room (salt The appearance shall has no abnormity density: 5%) at the temperature of 35℃ for 96 hrs. and soldering is good. Then clean it with water and dry its surface. Frequency Change: ±10ppm Max. Resistance Change: 5kohm Max. 4 Reflow soldering Frequency Change: ±10ppm Max. Frequency Change: ±10ppm Max. Resistance Change: ±25% or 10kΩ Max. E0-R-4-014 Rev. E Page 2 TYPE G1 TUNING FORK X'TAL G13270009 VER. A 24-Jun-11 MARKING 32768 DIMENSIONS (Unit:mm) L1 8.0±0.2 L2 9.6±0.5 D1 ψ 3.0±0.1 D2 ψ 3.0±0.1 D3 ψ 0.32±0.05 B 0.8±0.2 E0-R-4-014 Rev. E Page 3 TYPE G1 TUNING FORK X'TAL G13270009 VER. A 24-Jun-11 PACKING Quantity for Each Bag : 1000 pcs storeroom label deliver packing carton Green qualified label E0-R-4-014 Rev. E Page 4