G40C120CTFW

G40C120CTFW REVERSE VOLTAGE FORWARD CURRENT TRENCH SCHOTTKY RECTIFIER – 120 Volts – 40 Amperes ITO-220(S)AB FEATURES • High efficiency • Reduced high temperature reverse leakage • Reduced ultra-low forward voltage drop • Qualification is according to AEC-Q101 Rev_C ITO-220(S)AB DIM MIN MAX A 14.95 15.95 B 10.00 10.40 C 2.76 3.36 D 8.50 8.80 E 2.10 2.50 F 13.00 13.70 G 1.15 1.37 H 2.40 2.70 I 0.50 0.80 J 0.45 0.70 K 3.00 3.30 L 4.46 4.87 M 2.48 2.80 N 2.50 2.80 All dimension in millimeter APPLICATION • DC to DC converter • AC to DC Adaptors MECHANICAL DATA • Case: JEDEC TO-220ABFP • Case Material: “Green” molding compound, UL flammability classification 94V-0,(No Br. Sb. Cl.) “Halogen-free”. • Lead free finish, RoHS compliant • Weight: 1.558 grams (Approximate) • Marking code: G40C120CTFW P IN 1 P IN 2 P IN 3 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. ABSOLUTE RATINGS SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage PARAMETER VRRM 120 V Maximum DC blocking voltage VDC 120 V I(AV) 40 A IFSM 250 A TJ, TSTG -55 ~ +150 °C Maximum Average rectified output current @TC=20°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load. Operating junction and Storage Temperature range STATIC ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITIONS Forward voltage (Note1) IF=20A TJ=25°C TJ=125°C Leakage current VR=120V TJ=25°C TJ=125°C Typical junction capacitance (Note 2) SYMBOL TYP MAX UNIT VF -0.74 0.98 0.75 V IR -5.71 50 25 uA mA CJ 510 pF SYMBOL TYP UNIT RthJC 4.2 RthJL 3.2 THERMAL CHARACTERISTICS PARAMETER Typical thermal resistance (Note 3,4) Note : (1) (2) (3) (4) 300us pulse width, 2% duty cycle. Measured at 1.0MHz and applied voltage of 4.0V DC. Thermal resistance test performed in accordance with JESD-51. The unit mounted on fin-type heatsink ( 75mm x 100mm x 26.8mm ) with copper heatsink ( 19.9mm x 12.1 mm x 12.6mm) in free air condition . °C/W REV-0 , May-2018, KTHC190 RATING AND CHARACTERISTIC CURVES G40C120CTFW FIG.2 MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1 FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) 50 40 30 20 10 0 0 25 50 75 100 125 300 250 8.3ms single half sine-wave 200 150 100 50 0 150 1 FIG.3 TYPICAL FORWARD CHARACTERISTICS 10000 1000 10 CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) 100 FIG.4 TYPICAL JUNCTION CAPACITANCE 100 TJ =150°C TJ =0°C 1 TJ =25°C 100 TJ =25°C, f=1MHz, level =1V 10 TJ =100°C TJ=125°C 0.1 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FIG.5 TYPICAL REVERSE CHARACTERISTICS 100000 TJ =150°C 10000 1000 TJ =125°C 100 TJ =100°C 10 TJ =25°C 1 TJ =0°C 0.1 0.01 0 24 48 72 96 RATED PEAK REVERSE VOLTAGE, (V) 120 0.1 1 10 REVERSE VOLTAGE, (V) INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) 10 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, ( °C) 144 100 LEGAL DISCLAIMER NOTICE Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.