G43270019

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 32.768 KHz NOMINAL FREQUENCY PRODUCT TYPE TYPE G4 SMD X'TAL SPEC. NO. ( P/N ) G43270019 CUSTOMER P/N 0 Nov.9,2012 ISSUE DATE VERSION APPROVED B PREPARED QA AVL Status APPROVED BY CUSTOMER： Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev.E *RoHS Exception *HF-Halogen Free *REACH Compliant Page i TYPE G4 SMD X'TAL G43270019 VER. B 9-Nov-12 VERSION HISTORY Customer Receipt Date Version No. Version Date A Jan.21,2011 Initial Release B Nov.9,2012 Changed mechanical drawing E0-R-4-014 Rev.E Supplier Receipt Date Description Notes Page ii TYPE G4 SMD X'TAL G43270019 VER. B 9-Nov-12 ELECTRICAL SPECIFICATIONS SRe Part Number : G43270019 Parameters Symbol Specifications Units Nominal Frequency Fn 32.768 KHz Frequency Tolerance FT ± 20 ppm Load Capacitance CL 12.5 pF Typ. Drive Level DL 1 μW Max. ESR 35 KΩ Max. K -0.035 Shunt Capacitance C0 1.35 pF Operating Temperature Range TR -40~85 °C -55~85 °C Aging ±3 ppm Max 1st year Insulation Resistance 500 MΩ Min. Equivalent Series Resistance Temperature Coefficient Storage Temperature Range Notes at 25°C ± 5°C ppm/°C Typ. Typ. **RoHS Complaint Product Reliability ( Mechanical and Environmental Endurance ) No. 1 Test Items Vibration Test Method and Condition Requirements (1) Vibration Frequency: 10 to 55Hz Frequency Change: ±10ppm Max. (2) Vibration Amplitude: 1.5mm Resistance Change: ±15% or 5kΩ Max. (3) Cycle Time: 1-2min(10-55-10Hz) (4) Direction: X.Y.Z (5) Duration: 2h/each direction 2 3 Shock Leakage 3 Times free drop from 75cm height to hard wooden Frequency Change: ±10ppm Max. board of thickness more than 30mm Resistance Change: ±15% or 5kΩ Max. Put crystal units into a hermetic container and Leakage: 1x10¯8Pa·m3/s Max. Helium for 0.5-0.6Mpa, and keep it for 1h; Check the leakage by a Helium leak detector E0-R-4-014 Rev.E Page 1 TYPE G4 SMD X'TAL G43270019 4 Reflow soldering VER. B 9-Nov-12 Frequency Change: ±10ppm Max. Frequency Change: ±10ppm Max. Resistance Change: ±25% or 10kΩ Max. Note: the temperature used herein means the temperature on the circuit board. Reflow: 2 times max. 5 Lead Strength The crystal lead with the 0.9kg(9N) power (keep it for (DIP) 30s±5s) and bend the crystal lead 90° with 0.45kg The crystal lead is not abnormity power and two times 6 High Temperature The crystal units shall be put in somewhere for 2 hrs Frequency Change: ±10ppm Max. Endurance Resistance Change:±15% or 5kΩ Max. at temperature of -85℃±2℃, then keep it for 1 to 2 hrs under room temperature. 7 Low Temperature The crystal units shall be put in somewhere for 2 hrs Endurance at temperature of -25℃, then keep it for 1 to 2 hrs under room temperature. 8 Humidity The crystal units shall be put in somewhere at 40℃ Endurance in relative humidity of 90-95% for 48 hrs, then keep it for one or two hours under room temperature. 9 Temperature Temperature shift from low(-40℃) to high(100℃, keep Cycle 30 mins), satisfy high(100℃) to low(-40℃, keep 30 mins), then go up to room temperature for 5 cycles. 10 Salt Spray Test Put the crystal units in the salt spray room (salt The appearance shall has no abnormity density: 5%) at the temperature of 35℃ for 96 hrs. and soldering is good. Then clean it with water and dry its surface. Frequency Change: ±10ppm Max. Resistance Change:±15% or 5kΩ Max. E0-R-4-014 Rev.E Page 2 TYPE G4 SMD X'TAL G43270019 VER. B 9-Nov-12 Marking eBEmv Dimensions (Units: mm) E0-R-4-014 Rev.E Page 3 TYPE G4 SMD X'TAL G43270019 VER. B 9-Nov-12 TAPE AND REEL SPECIFICATION 1. Tape and Reel form conform to EIA-481-B 2. The quantity of crystal units per reel shall be 3000PCS. 3. A "LABEL" on which necessary information is clearly written is on the surface of packing box and the reel. CARRIER TAPE DIMENSIONS REEL DIMENSIONS E0-R-4-014 Rev.E Page 4