GBJ3510-F

Pb GBJ3510 NEW PRODUCT 35A GLASS PASSIVATED BRIDGE RECTIFIER Features Mechanical Data   Glass Passivated Die Construction High Case Dielectric Strength of 2500VRMS       Low Reverse Leakage Current Surge Overload Rating to 400A Peak Ideal for Printed Circuit Board Applications Lead-Free Finish; RoHS Compliant (Notes 1 & 2)        Case: GBJ Case Material: Molded Plastic. UL Flammability Classification 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Lead Free Tin Plated Leads, Solderable per MIL-STD202, Method 208 Polarity: Molded on Body Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 in-lbs Maximum Marking: Part Number Weight: 6.6 grams (Approximate) Ordering Information (Note 3) Part Number GBJ3510-F Notes: Qualification Commercial Case GBJ Packaging 15/Tube 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit VRRM VRWM VR 1000 V VR(RMS) 700 V IO 35 3.6 A IFSM 400 A I t 2 664 A2S TOR 0.8 N.m Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Output Current With Heatsink TC = +80°C (Note 4) Without Heatsink TC = +25°C Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on rated Load 2 I t Rating for Fusing (3ms < t < 8.3ms) (Note 4) Mounting Torque (Recommended Torque: 0.5N.m) Thermal Characteristics Characteristic Symbol Value Unit Typical Thermal Resistance Junction to Case (Note 5) RJC 1.0 °C/W Typical Thermal Resistance Junction to Lead (Note 5) RJL 1.5 °C/W TJ, TSTG -55 to +150 °C Operating and Storage Temperature Range Notes: 4. Non-repetitive, for t > 1ms and < 8.3ms. 5. Thermal resistance from junction to case per element. Unit mounted on 250 x 250 x 25mm aluminum plate heat sink. GBJ3510 Document number: DS37131 Rev. 3 - 2 1 of 4 www.diodes.com October 2016 © Diodes Incorporated GBJ3510 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Forward Voltage (Per Element) Typical Total Capacitance (Per Element) Note: Value Unit VFM 1.1 V @ TC = +25°C @ TC = +125°C IR 10 500 µA (Note 6) CT 150 pF @ IF = 17.5A Peak Reverse Current at Rated DC Blocking Voltage Symbol 6. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 100 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) )A ( T N E R R U C D R A W R O F E G A R E V A )A ( T N E R R U C D R A W R O F S U O E N A T N A T S N I With Heatsink 250x250*25mm Aluminum Plate 30 25 20 15 10 Without Heatsink 5 0 0 25 50 75 100 125 CASE TEMPERATURE (°C) Figure 1 Forward Current Derating Curve 150 450 TJ = 150°C 10 TJ = 125°C TJ = 25°C 1 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics 1000 8.3ms Single Half Sine-Wave 400 350 ) F p ( E C N A T I C A P A C 300 CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) NEW PRODUCT 35 250 200 150 100 100 T J = 25°C f = 1MHz 50 0 1 100 10 NUMBER OF CYCLES AT 60 Hz Figure 3 Maximum Non-Repetitive Surge Current GBJ3510 Document number: DS37131 Rev. 3 - 2 2 of 4 www.diodes.com 10 1 10 REVERSE VOLTAGE (V) Figure 4 Typical Junction Capacitance 100 October 2016 © Diodes Incorporated GBJ3510 INSTANTANEOUS REVERSE CURRENT (µA) NEW PRODUCT 1000 )A µ ( T N E R R U C E S R E V E R S U O E N A T N A T S N I TJ = 150°C TJ = 125°C 100 TJ = 100°C 10 TJ = 75°C 1.0 TJ =25°C 0.1 0.01 100 120 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) Figure 5 Typical Reverse Characteristics Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. GBJ L A K M B S _ J P D H N C R I G E GBJ3510 Document number: DS37131 Rev. 3 - 2 E 3 of 4 www.diodes.com GBJ Dim Min Max A 29.70 30.30 B 19.70 20.30 C 17.00 18.00 D 3.80 4.20 E 7.30 7.70 G 9.80 10.20 H 2.00 2.40 I 0.90 1.10 J 2.30 2.70 K 3.0 X 45 L 4.40 4.80 M 3.40 3.80 N 3.10 3.40 P 2.50 2.90 R 0.60 0.80 S 10.80 11.20 All Dimensions in mm October 2016 © Diodes Incorporated GBJ3510 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2016, Diodes Incorporated www.diodes.com GBJ3510 Document number: DS37131 Rev. 3 - 2 4 of 4 www.diodes.com October 2016 © Diodes Incorporated