GBU4005

GBU4005 - GBU410 4.0A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction · Lead Free Finish, RoHS Compliant (Note 4) High Case Dielectric Strength of 1500VRMS GBU Low Reverse Leakage Current Surge Overload Rating to 150A Peak Ideal for Printed Circuit Board Applications A B UL Listed Under Recognized Component Index, File Number E94661 M C L Mechanical Data · · K - Case: GBU Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · · · · Lead Free Plating (Tin Finish) ~ ~ + D E F J N Terminals: Plated Leads. Solderable per MIL-STD-202, Method 208 e3 G Min Max A 21.8 22.3 B 3.5 4.1 C 7.4 7.9 D 1.65 2.16 E 2.25 2.75 2.35 F 1.95 G 1.02 1.27 H 4.83 5.33 J 17.5 18.0 3.2 X 45° K P Polarity: Marked on Body Dim H Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 Inch-pounds Maximum L 18.3 18.8 M 3.30 3.56 N 0.46 0.56 P 0.76 1.0 All Dimensions in mm Ordering Information: See Last Page Marking: Date Code and Type Number Weight: 6.6 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol GBU 4005 GBU 401 GBU 402 GBU 404 GBU 406 GBU 408 GBU 410 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Forward Rectified Current (Note 1) @ TC = 100°C I(AV) 4.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 150 A Forward Voltage (per element) VFM 1.0 V IR 5.0 50 mA I2 t 93 A2 s CT Peak Reverse Current at Rated DC Blocking Voltage I2 t @ IF = 2.0A @ TC = 25°C @ TC = 125°C Rating for Fusing (Note 2) Typical Total Capacitance per Element (Note 3) Typical Thermal Resistance Junction to Case (Note 1) Operating and Storage Temperature Range Notes: 80 pF RqJC 2.2 °C/W Tj, TSTG -55 to +150 °C 1. Unit mounted on 50mm x 50mm x 1.6mm copper plate heatsink. 2. Non-repetitive, for t > 1.0ms and < 8.3ms. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21225 Rev. 7 - 2 1 of 3 www.diodes.com GBU4005 - GBU410 ã Diodes Incorporated I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 6 5 With heatsink 4 3 Without heatsink 2 1 Resistive or Inductive load 0 0 25 50 75 100 125 100 Tj = 25° C 10 1.0 0.1 150 180 1.0 1.8 1.4 100 Tj = 25° C f = 1.0MHz Single half-sine-wave 160 Tj = 25° C CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 120 80 40 10 1 0 1 100 10 1 Ordering Information 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, per element NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current Notes: 0.2 0.0 TC, CASE TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve (Note 5) Device Packaging Shipping GBU4005 GBU 20/Tube GBU401 GBU 20/Tube GBU402 GBU 20/Tube GBU404 GBU 20/Tube GBU406 GBU 20/Tube GBU408 GBU 20/Tube GBU410 GBU 20/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf DS21225 Rev. 7 - 2 2 of 3 www.diodes.com GBU4005 - GBU410 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21225 Rev. 7 - 2 3 of 3 www.diodes.com GBU4005 - GBU410