LLSD101B-13

LLSD101A - 101C SURFACE MOUNT SCHOTTKY BARRIER DIODE Features · · · · · Low Forward Voltage Drop NOT RECOMMENDED FOR NEW DESIGNS, PLEASE USE SD101AW - SD101CW Guard Ring Construction for Transient Protection C Fast Reverse Recovery Time Low Reverse Capacitance B Lead Free Finish, RoHS Compliant (Note 3) Mechanical Data A · · Case: MiniMELF · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: Cathode Band Case Material: Glass. UL Flammability Classification Rating 94V-0 MiniMELF Terminals: Finish - Sn97.5Ag2.5. Solderable per MIL-STD-202, Method 208 Ordering Information: See Last Page Dim Min Max A 3.30 3.70 B 1.30 1.60 C 0.28 0.50 All Dimensions in mm Marking: Cathode Band Only Weight: 0.05 grams (approximate) Maximum Ratings @ TA = 25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Forward Continuous Current (Note 1) Non-Repetitive Peak Forward Surge Current @ t £ 1.0s @ t = 10ms Power Dissipation (Note 1) Thermal Resistance, Junction to Ambient Air (Note 1) Operating Temperature Range Storage Temperature Range Electrical Characteristics Reverse Current (Note 2) Total Capacitance Reverse Recovery Time Note: LLSD101A LLSD101B LLSD101C Unit VRRM VRWM VR 60 50 40 V VR(RMS) 42 35 28 V IFM 15 mA IFSM 50 2.0 mA A Pd 400 mW RqJA 375 °C/W Tj -55 to +125 °C TSTG -55 to +150 °C @ TA = 25°C unless otherwise specified Characteristic Forward Voltage Drop (Note 2) Symbol Symbol Min Max VF ¾ 0.41 0.40 0.39 1.00 0.95 0.90 V IF = 1.0mA IF = 1.0mA IF = 1.0mA IF = 15mA IF = 15mA IF = 15mA LLSD101A LLSD101B LLSD101C IR ¾ 200 nA VR = 50V VR = 40V VR = 30V LLSD101A LLSD101B LLSD101C CT ¾ 2.0 2.1 2.2 pF VR = 0V, f = 1.0MHz trr ¾ 1.0 ns IF = IR = 5.0mA, Irr = 0.1 x IR, RL = 100W LLSD101A LLSD101B LLSD101C LLSD101A LLSD101B LLSD101C Unit Test Condition 1. Part mounted on FR-4 board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 2. Short duration test pulse used to minimize self-heating effect. 3. EC Directive 2002/95/EC (RoHS) revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied where applicable, see EU Directive Annex Notes 5 and 7. DS30067 Rev. 5 - 3 1 of 2 www.diodes.com LLSD101A - 101C ã Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS, PLEASE USE SD101AW - SD101CW 100 IF, FORWARD CURRENT (mA) 2 Tj = 25° C CT, CAPACITANCE (pF) 10 A B 1.0 C 0.1 C 1 B A 0.01 0 0.5 0 1.0 0 VF, FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristic Variations for Primary Conduction Ordering Information Notes: 10 20 30 40 50 VR, REVERSE VOLTAGE (V) Fig. 2 Total Capacitance vs Reverse Voltage (Note 4) Device Packaging Shipping LLSD101A-7 MiniMELF 2.5K/Tape & Reel, 7-inch LLSD101A-13 MiniMELF 10K/Tape & Reel, 13-inch LLSD101B-7 MiniMELF 2.5K/Tape & Reel, 7-inch LLSD101B-13 MiniMELF 10K/Tape & Reel,13-inch LLSD101C-7 MiniMELF 2.5K/Tape & Reel, 7-inch LLSD101C-13 MiniMELF 10K/Tape & Reel, 13-inch 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf. IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30067 Rev. 5 - 3 2 of 2 www.diodes.com LLSD101A - 101C