LM2902AQT14-13

LM2902Q/LM2902AQ/LM2904Q/LM2904AQ AUTOMOTIVE COMPLIANT DUAL AND QUAD OPERATIONAL AMPLIFIERS Pin Assignments The LM2902Q/LM2902AQ/LM2904Q/LM2904AQ series consist of two or four independent high-gain operational amplifiers with very low input offset voltage specification. They are designed to operate from a single power supply over a wide range of voltages; however, operation from split power supplies is also possible. They offer low power supply current independent of the magnitude of the power supply voltage. LM2904Q/ LM2904AQ (Top View) 1OUT 1IN- The LM2904_Q dual devices are available in SO-8, TSSOP-8 and MSOP-8; and the LM2902_Q quad devices are available in SO-14 and TSSOP-14. All of them are in industry-standard pin outs, and use “green” mold compound as standard. The LM2902Q/LM2902AQ/LM2904Q/LM2904AQ are characterized for operation from -40°C to +125°C, qualified to AEC-Q100 Grade 1 and are Automotive Compliant, supporting PPAPs. 1IN+ GND 1 2 3 1 VCC 7 2OUT 6 2IN- + 5 2IN+ 2 4 8 - + ADVANCED INFORMATION Description SO-8/TSSOP-8/MSOP-8 LM2902Q/ LM2902AQ Features           Notes: VCC 4 2IN+ 5 1 2OUT 6 7 4OUT 13 4IN12 4IN+ 11 GND 2 2IN- 4 - +  3 - - +  1IN+ 14 +  1IN- 1 2 1OUT +  (Top View) Wide Power Supply Voltage Range  Single Supply: 3V to 36V  Dual Supplies: ±1.5V to ±18V Very Low Supply Current Drain – Independent of Supply Voltage  LM2904Q: 500µA  LM2902Q: 700µA Low Input Bias Current: 20nA Low Input Offset Voltage  A Versions: 1mV (Typical)  Non-A Version: 2mV (Typical) Large DC Voltage Gain: 100dB Wide Bandwidth (Unity Gain): 700kHz (Temperature Compensated) Internally Compensated with Unity Gain Input Common-Mode Voltage Range Includes Ground Differential Input Voltage Range Equal to Power Supply Voltage Large Output Voltage Swing: 0V to VCC -1.5V Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q100 Grade 1 PPAP Capable (Note 4) 3 - 10 3IN+ 9 3IN- 8 3OUT SO-14/TSSOP-14 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain