MBR20100CT

MBR2070CT thru MBR20100CT REVERSE VOLTAGE – 70 to 100 Volts FORWARD CURRENT – 20 Amperes SCHOTTKY BARRIER RECTIFIER FEATURES • Metal of silicon rectifier, majority carrier conduction • Guard ring for transient protection • Low power loss, high efficiency • High current capability, low VF • High surge capacity • For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications TO-220AB B L C D A K E PIN 1 2 3 F O MECHANICAL DATA • Case :TO-220AB molded plastic • Case Material: “Green” molding compound, UL flammability classification 94V-0, (No Br. Sb. CI.) "Halogen-free" • Polarity : As marked on the body • Wight : 2.0275grams(Approximate) • Lead free finish, RoHS compliant • Mounting position : Any • Max. mounting torque=0.5N.m(5.1Kgf.cm) G I J N H H P IN 1 P IN 3 P IN 2 CASE DIM A B C D E F G H I J K TO-220AB MIN 14.40 9.65 2.54 5.84 8.26 -12.70 2.29 0.51 0.30 MAX 15.20 10.67 3.43 6.86 9.28 4.20 14.73 2.79 1.14 0.64 3.53φ 4.09φ L 3.56 4.83 M 1.14 1.40 N 2.03 2.92 O 1.14 1.70 All dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwis e specified. ABSOLUTE RATINGS PARAMETER Maximum repetitive peak reverse voltage Maximum DC blocking voltage @ TC = 120°C Maximum Average rectified output current Peak forward surge current 8.3ms single half sine-wave superimposed on rated load. Voltage Rate of Change (Rated VR) Operating temperature range Storage temperature range SYMBOL VRRM VDC I(AV) MBR2070CT 70 70 MBR2090CT 90 90 20 MBR20100CT 100 100 UNIT V V A IFSM 150 A dV/dt TJ TSTG 10000 -55 to +150 -55 to +175 V/uS °C °C SYMBOL UNIT Cj MAX 0.85 0.75 0.95 0.85 0.01 10 250 SYMBOL RthJc RthJL RthJa TYP 2 1 7 UNIT STATIC ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION TJ=25°C IF=10A TJ =125°C Forward voltage (Note1) TJ =25°C IF=20A TJ =125°C Maximum DC reverse current at Rated TJ =25°C Blocking voltage TJ =125°C Typical junction capacitance (Note2) VF IR V mA pF THERMAL CHARACTERISTICS PARAMETER Typical thermal resistance (Note3,4) Note : (1) 300us pulse width, 2% duty cycle. (2) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC (3) Thermal Resistance Junction to Case (4) The unit mounted on copper plate (75x75x15)mm heatsink °C/W REV. 16, Sep.-2016, KTHC09 RATING AND CHARACTERISTIC CURVES MBR2070 thru MBR20100CT FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 150 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 25 20 15 10 5 0 125 100 75 50 25 8.3ms single half sine-wave 0 0 25 50 75 100 125 150 1 10 FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.3- TYPICAL FORWARD CHARACTERISTICS 100 CAPACITANCE, (pF) 1000 10 TJ=125°C TJ=25°C 1 100 TJ=25°C, f=1MHz, level=1V 10 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1 1.2 10 100 REVERSE VOLTAGE, (V) INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.6- MAXIMUM NON REPETITIVE PEAK FORWARD CURRENT FIG.5- TYPICAL REVERSE CHARACTERISTICS VERSUS OVERLOAD DURATION PER DIODE 10 160 IM,SURGE FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT,(mA) INSTANTANEOUS FORWARD CURRENT, (A) 100 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, (°C) 1 TJ=125°C 0.1 0.01 0.001 TJ=25°C 20 40 60 80 100 120 100 TJ=25°C 80 60 40 IM 20 t TJ=125°C Duty=50% 0 1.00E-03 0.0001 0 140 1.00E-02 1.00E-01 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) DURATION TIME (SEC.) 1.00E+00 LEGAL DISCLAIMER NOTICE Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.