NX33F6215Z

SPECIFICATION FOR APPROVAL CUSTOMER 156.250000 MHz NOMINAL FREQUENCY PRODUCT TYPE TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z SPEC. NO. ( P/N ) 0 CUSTOMER P/N March 10, 2021 ISSUE DATE A VERSION APPROVED PREPARED QA Diodes Incorporated No.2, Ziqiang 5th Rd., Zhongli Industrial Park, Zhongli Dist., Taoyuan City 32063, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 https://www.diodes.com E0-R-4-014 Rev. F *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant Page i TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 VERSION HISTORY Version No. Version Date A Mar.10,2021 E0-R-4-014 Rev. F Description Notes Initial Release Page ii TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 ELECTRICAL SPECIFICATIONS SRe Part Number : Item NX33F6215Z Symbol Specifications Units Nominal Frequency Fo 156.250000 MHz Frequency Stability FT ± 25 ppm Operating Temperature Range TR -40 to +85 °C Supply Voltage VCC +3.3 ± 5.0% V Logic Type LT LVDS Supply Current, Output Enabled ICC/OE 70 mA Max. Supply Current, Output Disabled ICC/OD 40 mA Max. Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 0.4 ns Max. measured 20/80% of Waveform Output Voltage "0" Level VOL 1.10 / 0.9 V Typ. / Min. Output Voltage "1" Level VOH 1.43 / 1.6 V Typ. / Max. Rise / Fall Time Output Load 100Ω connected between outputs Notes **See note +3.3V Typ., also support +2.5V Output requires termination Differential Output Voltage VOD 247 / 454 mV Min. / Max. Jitter, Phase RMS 0.6 ps Max. 12kHz ~ 20MHz Frequency Band Jitter, Accumulated RMS(1-σ) 6 ps Max. 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 40 ps Max. 100,000 Random Periods -55 to +125 °C Storage Temperature Range ※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (1 year at 25°C Average Effective Ambient Temperature), Shock and Vibration. Output Enable / Disable Function Parameter Input Voltage (Pin1), Output Enable Min. Typ. Max. 0.7VCC V Or Open Output is Hi-Z 0.3VCC V Output Disable Delay 100 ns Output Enable Delay 100 ns Start Up Time 10 ms Input Voltage (Pin1), Output Disable (low power standby) E0-R-4-014 Rev. F Notes Units Page 1 TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 TEST CIRCUIT OUTPUT WAVEFORM E0-R-4-014 Rev. F Page 2 TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 RELIABILITY SPECIFICATIONS ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: Pb - free and RoHS/ Green Compliant. MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D E0-R-4-014 Rev. F Page 3 TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 MARKING Logo e 15G v Nd yww Dot Denotes Pin #1 Frequency & Factory Code Date Code Nd y ww v Model Series Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale: None. Dimensions are in mm.) Recommended Land Pattern* 1.05 TYP. 1.85 2.50 0.90±0.15 #1 2.0 TYP. 0.50 TYP. #2 #3 1.0 TYP. 0.65 TYP. #6 #5 Bottom View E0-R-4-014 Rev. F #4 0.10 TYP. 0.70 TYP. Pin Function 1 OE NC Ground Q 2 3 4 5 6 Q VCC Page 4 TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 TAPE & REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. F Page 5 TYPE NX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX33F6215Z VER. A 10-Mar-21 PACKING Begin Start Close End 3000pcs-Product Tape Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. F Page 6