NX53D3301Z

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 133.333333 MHz NOMINAL FREQUENCY PRODUCT TYPE TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z SPEC. NO. ( P/N ) 0 CUSTOMER P/N September 25, 2015 ISSUE DATE D VERSION APPROVED PREPARED QA AVL Status APPROVED BY CUSTOMER： Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev. E *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant Page i TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 VERSION HISTORY Version No. Version Date A Sep.7,2015 Initial Release B Sep.11,2015 Updated Nominal Frequency to 133.333333MHz C Sep.22,2015 Changed Rise / Fall Time & Output Voltage "1" Level Sep.25,2015 1. Added edge rate, overshoot voltage & undershoot voltage 2. Updated logic type & output enable / disable Function table D E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Description Notes Page ii TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 ELECTRICAL SPECIFICATIONS SRe Part Number : Item NX53D3301Z Symbol Specifications Units Nominal Frequency Fo 133.333333 MHz Frequency Stability FT ± 50 ppm Operating Temperature Range TR -40 to +85 °C Supply Voltage VCC +3.3 ± 5.0% V Logic Type LT Notes **See note Specific common mode differential Supply Current, Output Enabled ICC/OE 70 mA Max. Supply Current, Output Disabled ICC/OD 40 mA Max. Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 500 ps Max. measured 20/80% of Waveform Output Voltage "0" Level VOL 0 / 0.5 V Min. / Max. Output Voltage "1" Level VOH 1.4 V Max. Output Common Model VCM 0.50 / 0.60 / 0.65 V Min / Typ / Max. Diff ti l Output O t t Voltage V lt Differential VOD 0 99 / 1 32 0.99 1.32 V Mi / M Min. Max. 1 / 12 V/ns Rise / Fall Time Edge Rate Min. / Max., Edge rate = VOD / TR Overshoot Voltage VOVS +0.2 V Max., from VOH Undershoot Voltage Vuds -0.2 V Min., from VOL Output Load 35Ω shunted to GND RMS Jitter, Phase Phase Noise Output requires termination(special case) 0.4 / 1 ps -140 / -130 dBc/Hz Typ. / Max. 12KHz~20MHz Frequency Band Typ. / Max., At 1MHz frequency offset Jitter, Accumulated RMS(1-σ) 6 ps Max. 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 40 ps Max. 100,000 Random Periods -55 to +125 °C Storage Temperature Range ※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (1 years at 25°C Average Effective Ambient Temperature), Shock and Vibration. Output Enable / Disable Function Parameter Input Voltage (Pin2), Output Enable Min. Typ. Max. 0.7VCC Notes Units V Or Open 0.3VCC V Output is Hi-Z Output Disable Delay 5 us Output Enable Delay 20 us Start Up Time 10 ms Input Voltage (Pin2), Output Disable (low power standby) E0-R-4-014 Rev. E Page 1 TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 TEST CIRCUIT NC OE NC VCC OE QB GND Q 35Ω 35Ω OUTPUT WAVEFORM VOH = +1.4V max VCM = +0.6V typ VOL = +0V min E0-R-4-014 Rev. E Page 2 TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 RELIABILITY SPECIFICATIONS ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: Pb - free and RoHS/ Green Compliant. MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf E0-R-4-014 Rev. E Page 3 TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 MARKING Logo SRe 13D Ndywwv Dot denotes Pin #1 Nd Model Series Frequency Code Date & Factory Code y ww Week Code Year Code (last digit of year) v Factory Code MECHANICAL DRAWINGS ( Scale: None. Dimensions are in mm.) Recommended Land Pattern* Pin Function 1 NC OE Ground Q Q VCC 2 3 4 5 6 E0-R-4-014 Rev. E Page 4 TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 TAPE & REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. E Page 5 TYPE NX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX53D3301Z VER. D 25-Sep-15 PACKING Begin Close Start 500pcs-Product Tape End Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. E Page 6