NX7032E0218.750000

Ultra Low Jitter PLL Crystal Oscillator 7.0 x 5.0mm NX703 2.5V/3.3V LVDS XO 7.0 x 5.0mm Ceramic SMD Package: (Scale: none, Dimensions are in mm) Product Features • Very low phase jitter - < 1.0ps RMS max. Recommended Land Pattern: • Wide frequency range - 5 ~ 1000MHz • Thicker crystal for improved reliability • Low supply current - 70mA max. • Industrial Temperature Range • Pb-free & RoHS compliant • Fast lead time CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. Product Description Pin Functions: The NX703 XO series is a high performance LVDS crystal oscillator family with very low jitter performance. It supports various options including wider frequency range, 2.5V/3.3V voltage, and various stabilities. It is designed to meet the clock source specifications for communication systems, and other high performance equipment. Pin Function 1 OE Function 2 N/C 3 Ground 4 Q 5 Q 6 VCC CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. Applications *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. • Networking systems • Servers and storage systems • Profession video equipments Part Ordering Information: UX NX70703 V • Test and measurement A • FPGA/ASIC clock generation Voltage: 1=+3.3V 2=+2.5V SaRonix-eCera™ is a Pericom® Semiconductor company • I1 FFFF.FFFFFF FFFF.FFFFFF B C Stability and Temp Range: Stability Temp Range A = +/-20 ppm -20/+70°C B = +/-25 ppm -20/+70°C C = +/-50 ppm -20/+70°C D = +/-25 ppm -40/+85°C E = +/-50 ppm -40/+85°C Frequency: FFFF.FFFFFF MHz, “4 digits/decimal/6 digits” format US: +1-408-232-9100 TW: +886-3-4518888   •   www.pericom.com 14-0024 All specifications are subject to change without notice. NX703 Rev B 08/13/14 1 NX703 2.5V/3.3V LVDS XO Ultra Low Jitter PLL Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Max. Units 1000 MHz 3.135 3.3 3.465 2.375 2.5 2.625 Output Frequency 5 Supply Voltage Supply Current, Output Enabled V 70 Notes See ordering options mA Supply Current, Output Disabled only 40 mA Frequency Stability ±50 ppm See ordering options +85 °C See ordering options Operating Temperature Range -40 Output Logic 0, VOL 0.9 1.1 V 1.43 Output Logic 1, VOH Output Load 1.6 V 100Ω connected between outputs Differential Output Voltage. VOD 0.247 0.454 V 45 55 % 400 ps Measured 20/80% of waveform 6 ps 20.000 adjacent periods Duty Cycle Rise and Fall Time Jitter, Accumulated , RMS (1-σ) Jitter, Phase, RMS Output requires termination Measured 50% VCC < 40MHz 0.4 1 ps 12kHz to 5 MHz frequency band 40 to 1000MHz 0.4 1 ps 12kHz to 20 MHz frequency band 125MHz, 156.25MHz 0.4 0.6 ps 12kHz to 20 MHz frequency band 40 ps 100,000 random periods Jitter, pk-pk Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. Phase jitter typical value is depending on output frequencies. 3. For specifications other than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. 0.7 VCC Units Notes V or open 0.3 VCC V Output is Hi-Z Output Disable Delay 100 ns Output Enable Delay 100 ns Start up Time 10 ms Input Voltage (pin 1), Output Disable (low power standby) Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 Max. Units +125 °C Notes For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/hiflex-xo/?part=NX703 For test circuit go to: http://www.pericom.com/pdf/sre/tc_lvds.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-232-9100 TW: +886-3-4518888   •   www.pericom.com 14-0024 All specifications are subject to change without notice. NX703 Rev B 08/13/14 2