NX76R0001Q

SPECIFICATION FOR APPROVAL CUSTOMER 270.000000 MHz NOMINAL FREQUENCY PRODUCT TYPE TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q SPEC. NO. ( P/N ) 0 CUSTOMER P/N September 6, 2018 ISSUE DATE B VERSION APPROVED PREPARED QA Diodes Incorporated No.2, Ziqiang 5th Rd., Zhongli Industrial Park, Zhongli Dist., Taoyuan City 32063, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 https://www.diodes.com *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant *AEC-Q200 Compliant E0-R-4-014 Rev. F Page i TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 VERSION HISTORY Version No. Version Date A Dec.16,2016 Initial Release B Sep.6,2018 Updated Logo E0-R-4-014 Rev. F Description Notes Page ii TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 ELECTRICAL SPECIFICATIONS SRe Part Number : Item NX76R0001Q Symbol Specifications Units Nominal Frequency Fo 270.000000 MHz Frequency Stability FT ± 25 ppm Operating Temperature Range TR -40 to +85 °C Supply Voltage VCC +3.3 ± 5.0% V Logic Type LT CML Supply Current, Output Enabled ICC/OE 70 mA Max. Supply Current, Output Disabled ICC/OD 40 mA Max. Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 400 ps Max. measured 20/80% of Waveform Rise / Fall Time Output Load 100Ω connected between outputs Notes **See note Output requires termination Differential Output Voltage VOD 0.35 / 0.65 V Min. / Max. Jitter, Phase RMS 0.4 / 0.6 ps Typ / Max. 12KHz ~ 20MHz Frequency Band Jitter, Accumulated RMS(1-σ) 6 ps Max. 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 40 ps Max. 100,000 Random Periods -55 to +125 °C Storage Temperature Range ※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (1 year at 25°C Average Effective Ambient Temperature), Shock and Vibration. Output Enable / Disable Function Parameter Input Voltage (Pin2), Output Enable Min. Typ. Max. 0.7VCC Notes Units V Or Open 0.3VCC V Output is Hi-Z Output Disable Delay 100 ns Output Enable Delay 100 ns Start Up Time 10 ms Input Voltage (Pin2), Output Disable (low power standby) E0-R-4-014 Rev. F Page 1 TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 TEST CIRCUIT OUTPUT WAVEFORM E0-R-4-014 Rev. F Page 2 TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 AEC-Q200 RELIABILITY TEST SPECIFICATIONS: 1. Initial 1.1 Physical Dimensions: JESD22, Method JB1-100 1.2 External Visual: MIL-STD-883, Method 2009 1.3 Freq. Vs. Temperature: Per Specification/Datasheet 2. Mechanical 2.1 Mechanical Shock: MIL-STD-202 Method 213 2.2 Vibration: MIL-STD-202 Method 204 2.3 Solderability: J-STD-002 2.4 Board Flex: AEC Q200-005 2.5 Terminal Strength (SMD): AEC Q200-006 3.Environmental 3.1 Temp Cycle: JESD22, Method JA-104 3.2 Resistance to Solder Heat: MIL-STD-202 Method 210 3.3 High Temperature Operating Life: MIL-STD-202, Method 108 3.4 High Temp Exposure: MIL-STD-202, Method 108 3.5 High Temp & High Humidity: MIL-STD-202, Method 103 3.6 Thermal Shock: MIL-STD-202, Method 107 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D E0-R-4-014 Rev. F Page 3 TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 MARKING Logo SRe 270.000 Nk ywwv Dot denotes Pin #1 Frequency Code Date & Factory Code Nk y ww v Model Series Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale: None. Dimensions are in mm.) Recommended Land Pattern* Pin Function 1 NC 2 3 4 5 6 OE Ground Q Q VCC Bottom View E0-R-4-014 Rev. F Page 4 TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 TAPE & REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. F Page 5 TYPE NX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR NX76R0001Q VER. B 6-Sep-18 PACKING Begin Start Close End 500pcs-Product Tape Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. F Page 6