PI2EQX502TZHEX

A product Line of Diodes Incorporated PRODUCT BRIEF PI2EQX502T 1.2V, 5.0Gbps, 1-Port, USB3.0 ReDriver Features Description The PI2EQX502T is a low power, high performance 5.0 Gbps signal ReDriver designed specifically for the USB 3.0 protocol. ¼¼USB 3.0 compatible The device provides programmable equalization and De- ¼¼Full Compliancy to USB3.0 Super Speed Standard Emphasis to optimize performance over a variety of physical ¼¼Two 5.0Gbps differential signal pairs mediums by reducing Inter-Symbol Interference. PI2EQX502T supports two 100Ω Differential CML data I/O’s between the Protocol ASIC to a switch fabric, over cable, or to extend the signals across other distant data pathways on the user’s platform. The integrated equalization circuitry provides flexibility with ¼¼Adjustable Receiver Equalization ¼¼100Ω Differential CML I/O’s ¼¼Pin Configured Output Emphasis Control signal integrity of the signal before the ReDriver. A low-level ¼¼Input signal level detect and squelch for each channel input signal detection and output squelch function is provided ¼¼Automatic Receiver Detect for each channel. Each channel operates fully independently. The channels’ input signal level (on xI+/-) determines whether ¼¼Low Power : ~137mW ¼¼Auto “Slumber” mode for adaptive power management the output is active. The PI2EQX502T also includes an automatic receiver detect function. The receiver detection loop will be active again if the corresponding channel’s signal detector is idle for longer than ¼¼Single Supply Voltage: 1.2V ¼¼Packaging: 16-Pin TQFN 3 x 3 mm 7.3mS. The channel will then move to Unplug Mode if load not detected, or it will return to Low Power Mode (Slumber Mode) due to inactivity. Pericom USB 3.0 ReDriver Application Diagram PC Monitor Signal Detection Pericom USB 3.0 ReDriver Tablet PC CML Digital Camera CML XO+ XI+ Equalizer Limiting Amp XI – XO – EQ_x - Repeated 2 times - External Storage USB 3.0 Device Cable Power Management diodes.com | 1-408-232-9100 Multi-function Printer