PI3DPX1203ZHEX

NEWProduct PRODUCT New Brief BRIEF Product Databrief SIGNAL INTEGRITY SOLUTIONS PI3DPX1203 DisplayPort 1.3 8Gb/s Linear ReDriver for Source, Active Cable & Sink-side Applications Pericom Semiconductor’s PI3DPX1203 is DisplayPor t Features compliant, 8Gbps link speed, single differential channel ¼¼ DisplayPort Linear ReDriver with Link Training transparent mode. ¼¼ Support Since DisplayPor t source and sink-side device are unaware of the Linear ReDriver, they never generate AUX link training transactions, and pass through all the AUX transactions between source and sink-side devices. PI3DPX1203 provides programmable input equalization, linear swing and flat gain control to optimize output over a variety of physical mediums by reducing intersymbol interference. The integrated linear equalization circuitry provides flexibility with signal integrity of the signal before and after the ReDriver. A low-level input signal detection and output squelch function is provided. flexible placement for Active cable, Sink and Source side ¼¼ Ideal for USB Type-C sink and source-side application with PD controllers TM ¼¼ Transparent DisplayPort link training. No need Aux Link training listener circuits ¼¼ Low latency transparent for the DisplayPort link training allow for Sink-side application ¼¼ Linear Input Equalization Increases Link Margin for Systems Implementing Decision Feedback Routing Equalizers (DFE) ¼¼ Independent channel configuration of input equalization, output swing and flat gain ¼¼ Pin strap or I C programmable for device configuration setting Application ¼¼ PCs and Peripherals ¼¼ DisplayPort standard 1.3 Compliant Linear ReDriver Active cables Block Diagram 2 ¼¼ Channel order swap and polarity swap support ¼¼ Aux channel connect directly from source to sink device ¼¼ 4-bit selectable address bit for I C port ¼¼ Supply 2 Voltage: 3.3V ¼¼ Package www.pericom.com | 1-408-232-9100 : 42-pin TQFN (3.5mm x 9mm)