PI4ULS3V204LEX

PI4ULS3V204 4-Bit Bi-directional Level Shifter for open-drain and Push-Pull Application Features Description  Fully Symmetric Supply Voltage  1.1V to 3.6V on A Port and B Port  High-Speed with 24 Mb/s Data Rate for push-pull The PI4ULS3V204 is a 4-bit configurable dual supply bidirectional auto sensing translator that does not require a directional control pin. The A and B ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both the VCCA and VCCB supply rails are configurable from 1.1V to 3.6V. This allows voltage logic signals on the VCCA side to be translated into lower, higher or equal value voltage logic signals on the VCCB side, and vice-versa. The translator has integrated 10 kΩ pull-up resistors on the I/O lines. The integrated pull-up resistors are used to pull-up the I/O lines to either VCCA or VCCB. The PI4ULS3V204 is an excellent match for open-drain applications such as the I2C communication bus. application  High-Speed with 2 Mb/s Data Rate for open-drain application No Direction-Control Signal Needed Low Bit-to-Bit Skew Non-preferential Power-up Sequencing ESD protection exceeds 8000V HBM per JESD22A114  Integrated 10 kΩ Pull-up Resistors  Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3)  For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/productdefinitions/  Packaging (Pb-free & Green): 。 14-pin, TSSOP (L) 。 14-pin, 3.5x3.5 mm TQFN (ZB) 。 12-pin, CSP (GA)     Applications  I2C, SMBus, MDIO  Low Voltage ASIC Level Translation  Mobile Phones, PDAs, Camera Block Diagram Figure 1: Block Diagram Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain