PI5A4624
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
SOTINY™ 1-Ohm, Low-Voltage
Single-Supply SPDT Switch
Features
Description
•
The PI5A4624 is an improved, direct replacement for the MAX4624
single-pole, double-throw (SPDT) analog switch. Improved specifications include a low maximum On-resistance of 1-ohm and fast
switching times (tON = 50ns max., tOFF = 50 max.) with 5V supply
operation. With a 2.5V supply, resistance is a low 4-ohm max.
•
•
•
•
•
•
•
•
•
•
•
Low On-Resistance: 1-ohm max (+5V Supply)
2-ohm max (+3V Supply)
RON Matching: 0.12-ohms max.at 25 °C
RON Flatness: 0.12-ohms max. (+5V Supply) at 25 °C
Low 4nA Input Leakage at 25 °C
+1.8V to +5.5V Single-Supply Operation
Fast Switching Time (PI5A4624)
- 50ns tON
- 50ns tOFF
Break-Before-Make Switching Guaranteed (PI5A4624)
-57dB Off-Isolation at 1MHz
TTL/CMOS Logic Compatible
Low Power Consumption: 5μW
Improved Direct Replacement for MAX4624
Packaging (Pb-free & Green available):
– 6-pin Small Compact SOT23 (T)
Specifications are given for 1.8V, 2.5V, 3.3V and 5V power supply
operation. Operating voltage range is +1.8V to +5.5V.
To minimize PC board area use, the PI5A4624 is available in a
compact 6-pin SOT23 package.
Functional Diagram, Pin Configuration
PI5A4624
Applications
•
•
•
•
•
•
•
•
•
•
•
Communication Circuits
Cellular Phones
Audio and Video Signal Routing
Portable Battery-Operated Equipment
Data Acquisition Systems
Computer Peripherals
Telecommunications
Relay Replacement
Wireless Terminals and Peripherals
Hard Drives
Modems
IN 1
6 NO
V+ 2
5 COM
4 NC
GND 3
SOT23
Top View
Switches shown for Logic “0” input
Truth Table
PI5 A4 6 2 4
09-0001
1
Lo g ic
NC
NO
0
ON
O FF
1
O FF
ON
PS8635D
10/20/08
PI5A4624
SOTINY™ 1-Ohm, Low -Voltage
Single-Supply SPDT Switch
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Absolute Maximum Ratings
Thermal Information
Voltages Referenced to GND
V+ ........................................................................ –0.5V to +5.5V
Continuous Power Dissipation
VIN, VCOM, VNC, VNO (Note 1) ..................... –0.5V to V+ +0.3V
or 30mA, whichever occurs first
Storage Temperature ......................................... –65ºC to +150ºC
SOT23-6 (derate 7.1mW/ºC above +70ºC) ............................. 0.5W
Lead Temperature (soldering, 10s) .................................. +300ºC
Current (any terminal) .................................................... ±200mA
Peak Current, COM, NO, NC
(Pulsed at 1ms, 10% duty cycle) .................................... ±400mA
Note:
1. Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by
internal diodes. Limit forward diode current to 30mA.
Caution: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress
only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied.
Electrical Specifications - Single +5V Supply
(V+ = +5V ± 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = -40ºC to 85ºC)
Parame te r
Symbol
Conditions
Te mp. (°C)
M in.
(1)
Typ.
(2)
M a x.
(1)
Units
Analog Switch
Analog Signal Range
(3)
On Resistance
VANALOG
Full
25
RON
On- Resistance Match
(4)
Between Channels
Δ RON
V+ = 4.5V, ICOM = - 30mA,
VNO or VNC = +2.5V
RFLAT(ON)
V+ = 4.5V, ICOM = - 30mA,
VNO or VNC = 0V, 1.5V, 2.5V
NO or NC Off Leakage
(6)
Current
INO(OFF) or
INC(OFF)
V+ = 5.5V, VCOM = 0V
VNO or VNC = 4.5V
ICOM(ON)
V+ = 5.5V, VCOM = +4.5V
VNO or VNC = +4.5V
COM On Leakage
(6)
Current
09-0001
V+
0.70
Full
2
V
0.90
1. 1
25
0.03
Full
On- Resistance Flatness
(5)
0
0.05
0.10
25
0.08
Full
ohm
0 . 12
0.15
25
2
0.01
Full
–20
20
25
–4
4
Full
–40
0.3
2
nA
40
PS8635D
10/26/09
PI5A4624
SOTINY™ 1-Ohm, Low -Voltage
Single-Supply SPDT Switch
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Electrical Specifications - Single +5V Supply (continued)
(V+ = + 5V ± 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V)
Parame te r
M in.
(1)
Typ.
(2)
Symbol
Conditions
Te mp. (°C)
M a x.
Input High Voltage
VIH
Guaranteed Logic High Level
Full
Input Low Voltage
VIL
Guaranteed Logic LowLevel
Input Current with
Voltage High
IINH
VIN= 2.4V, all others = 0.8V
–1
0.005
1
Input Current with
Voltage Low
IINL
VIN= 0.8V, all others = 2.4V
–1
0.005
1
20
35
(1)
Units
Analog Switch
2.4
0.8
V
μA
D ynamic
Turn- O n- Time
25
tON
Full
VCC = 5V, Figure 1
Turn- O ff- Time
Figure 3 (PI5A4624 O nly)
Make- Before- Break
tMBB
Figure 4 (PI5A4625 O nly)
Q
CL - 1nF, VGEN = 0V,
RGEN = 0- ohm, Figure 2
O ff Isolation
CrossTalk
(8)
15
Full
tBBM
(3)
25
tOFF
Break- Before- Make
Charge Injection
40
35
25
1
12
Full
1
17 . 5
25
1
14
Full
1
2 0 .5
25
RL = 50- ohms,
f = 1MHz, Figure 5
–5 7
XTALK
RL = 50- ohms,
f = 1MHz, Figure 6
–5 7
CNC/NO (OFF)
CO M O ff Capacitance
CCOM(OFF)
CO M O n Capacitance
CCOM(ON)
14 . 5
ns
17
40
O IRR
N C or NO Capacitance
20
pC
dB
42
f = 1MHz, Figure 7
pF
83
f = 1MHz, Figure 8
13 0
Supply
Power- Supply Range
V+
Positive Supply Current
I+
VCC = 5.5V, VIN = 0V orV+
Full
1.8
0.5
5 .5
V
1
μA
Notes:
1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet.
2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing.
3. Guaranteed by design.
4. ΔRON = RON max. - RON min.
5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured.
6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC.
7. Off Isolation = 20log10 [ VCOM / (VNO or VNC) ]. See Figure 5
8. Between any two switches. See Figure 6.
09-0001
3
PS8635D
10/26/09
PI5A4624
SOTINY™ 1-Ohm, Low -Voltage
Single-Supply SPDT Switch
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Electrical Specifications - Single +3.3V Supply
(V+ = +3.3V ± 10%, GND = 0V, VINH = 2.0V, VINL = 0.6V)
Parame te r
Symbol
Conditions
Te mp. (°C)
M in.
(1)
Typ.
(2)
M ax.
(1)
Units
Analog Switch
(3)
Analog Signal Range
On- Resistance
VANALOG
RON
On- Resistance Match
(4)
Between Channels
Δ RON
On- Resistance Flatness
RFLAT(ON)
0
V+ =3V, ICOM = –24mA
VNO or VNC = 2.0V
V+ =3.3V, ICOM = –24mA
VNO or VNC = 0.8V, 2.0V
25
V+
1. 4
Full
V
1.8
2.2
25
0.04
Full
0.11
25
0.17
Full
0 . 25
25
30
0 . 05
ohm
0 .2
Dynamic
Turn- On- Time
tON
Full
V+ = 3.3V, VNO
or VNC = 2.0V, Figure
40
55
25
20
25
Turn- Off- Time
tOFF
Break- Before- Make
tBBM
Figure 3 (PI5A4624 Only)
25
1
21
29
Make- Break- Before
tMBB
Figure 4 (PI5A4625 Only)
25
1
13
17.5
Q
CL - 1nF, VGEN = 0V,
RGEN = 0V, Figure 2
25
30
I+
V+ = 3.6V, VIN =0V or V+
All Channels on or off
Full
0.5
Input High Voltage
VIH
Guaranteed Logic High Level
Full
Input Low Voltage
VIL
Guaranteed Logic LowLevel
Full
Input High Current
IINH
VIN = 2.4V, all others = 0.8V
Full
–1
1
Input Low Current
IINL
VIN = 0.8V, all others = 2.4V
Full
–1
1
(3)
Charge Injection
Full
40
ns
pC
Supply
Positive Supply Current
1
μA
Logic Input
2
0.6
V
μA
Notes:
1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet.
2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing.
3. Guaranteed by design.
4. ΔRON = RON max. - RON min.
5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured.
09-0001
4
PS8635D
10/26/09
PI5A4624
SOTINY™ 1-Ohm, Low -Voltage
Single-Supply SPDT Switch
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Electrical Specifications - Single +2.5V Supply
(V+ = +2.5V ± 10%, GND = 0V, VINH = 1.8V, VINL = 0.6V)
Parame te r
Symbol
Conditions
Te mp. (°C)
M in.
(1)
Typ.
(2)
M ax.
(1)
Units
Analog Switch
(3)
Analog Signal Range
On- Resistance
VANALOG
RON
On- Resistance Match
(4)
Between Channels
Δ RON
On- Resistance Flatness
RFLAT(ON)
0
V+ =2.5V, ICOM = –8mA
VNO or VNC = 1.8V
V+ =2.5V, ICOM = –8mA
VNO or VNC = 0.8V, 1.8V
25
V+
1.6
Full
V
2
2.7
25
0.13
Full
0.2
25
0.25
Full
0 . 45
25
40
0.16
Ohm
0.3
Dynamic
Turn- On- Time
tON
Full
V+ =2.5V, VNO or
VNC = 1.8V, Figure 1
55
70
25
30
40
Turn- Off- Time
tOFF
Break- Before- Make
tBBM
Figure 3 PI5A4624 Only)
25
1
33
39
Make- Break- Before
tMBB
Figure 4 PI5A4625 Only)
25
1
9
13
Q
CL - 1nF, VGEN = 0V,
RGEN = 0V, Figure 2
25
20
I+
V+ = 2.75V, VIN =0V or V+
All Channels on or off
Full
0.5
Input High Voltage
VIH
Guaranteed Logic High Level
Full
Input Low Voltage
VIL
Guaranteed Logic LowLevel
Full
Input High Current
IINH
VIN = 2.0V, all others = 0.8V
Full
–1
1
Input Low Current
IINL
VIN = 0.8V, all others = 2.0V
Full
–1
1
(3)
Charge Injection
Full
55
ns
pC
Supply
Positive Supply Current
1
μA
Logic Input
1.8
0.6
V
μA
Notes:
1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet.
2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing.
3. Guaranteed by design.
4. ΔRON = RON max. - RON min.
5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured.
09-0001
5
PS8635D
10/26/09
PI5A4624
SOTINY™ 1-Ohm, Low -Voltage
Single-Supply SPDT Switch
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Electrical Specifications - Single +1.8V Supply
(V+ = +1.8V ± 10%, GND = 0V, VINH = 1.5V, VINL = 0.6V)
Parame te r
Symbol
Conditions
Te mp. (°C)
M in.
(1)
Typ.
(2)
M ax.
(1)
Units
Analog Switch
(3)
Analog Signal Range
O n- Resistance
VANALOG
RON
O n- Resistance Match
(4)
Between Channels
O n- Resistance Flatness
0
V+ =1.8V, ICOM = –2mA
VNO or VNC = 1.5V
Δ RON
V+ =1.8V, ICOM = –2mA
VNO or VNC = 0.6V, 1.5V
RFLAT(ON)
25
V+
2.8
Full
V
4
5
25
0.44
Full
0.7
25
0.5
Full
0.9
25
65
0.6
O hm
0 .6
D ynamic
Turn- O n- Time
tON
Full
V+ =1.8V, VNO or
VNC = 1.5V, Figure 1
70
95
25
40
55
Turn- O ff- Time
tOFF
Break- Before- Make
tBBM
Figure 3 (PI5A4624 O nly)
25
1
60
72
Make- Break- Before
tMBB
Figure 4 (PI5A4625 O nly)
25
1
10
14
Q
CL - 1nF, VGEN = 0V,
RGEN = 0V, Figure 2
25
10
I+
V+ = 2.0V, VIN =0V or V+
All Channels on or off
Full
0.5
Input High Voltage
VIH
Guaranteed Logic High Level
Full
Input Low Voltage
VIL
Guaranteed Logic LowLevel
Full
Input High Current
IINH
VIN = 1.5V, all others = 0.8V
Full
–1
1
Input Low Current
IINL
VIN = 0.8V, all others = 1.5V
Full
–1
1
(3)
Charge Injection
Full
70
ns
pC
Supply
Positive Supply Current
1
μA
Logic Input
1.8
0.6
V
μA
Notes:
1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet.
2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing.
3. Guaranteed by design.
4. ΔRON = RON max. - RON min.
5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured.
09-0001
6
PS8635D
10/26/09
PI5A4624
SOTINY™ 1-Ohm, Low -Voltage
Single-Supply SPDT Switch
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012
Test Circuits/Timing Diagrams
V+
Logic VINH
Input
VINL
V+
NC
NO
VCOM
CL
35pF
RL
50Ω
Logic
Input
VOUT
VNO
CL
35pF
RL
50Ω
Switch
Output
GND
tr