PI5USB30213XEAEX

  PI5USB30213 USB 3.1 Gen 1 (5Gbps) SuperSpeed Mux/Demux Switch with I2C Control Product Description The PI5USB30213 is a dual differential channel bi-directional multiplexer/de-multiplexer switch solution for USB 3.1 Gen 1 Type-C connector applications. PI5USB30213 switches between the USB controller and the new Type-C connector. It supports host mode, device mode and dual-role mode ports with automatic configuration based on the voltage levels detected on CC pin. It offers excellent signal integrity for high-speed signals at low power dissipation. PI5USB30213 supports both pin and I²C control base on ADDR pin setting. In pin control mode, the PORT input pin determines the port setting, whether this is a host, device or dual-role port. In host mode, PI5USB30213 monitors ID pin to check connector status, it offers default current mode to power attached accessories. In device mode, PI5USB30213 monitors OUT1, OUT2 and OUT3 which report the detected host’s charging profile capability to allow the system to select the most appropriate charging schemes. Enabling I²C control mode allow high flexibility for port control and communications through registers read/write in PI5USB30213. There is also flexibility to support Default, 1.5A and 3A current modes. An interrupt signal for indicating changes with the I²C registers is sent to the master to notify the system any change in the Type-C connector while in parallel the system can still monitor ID pin. Features         USB Type‐C™ Specification 1.1  Dual Differential Channel, 2:1 USB 3.1 Gen 1 Mux/DeMux  Switches USB controller and Type‐C connector  Supports Host‐mode/Device‐mode/Dual‐role mode  Auto‐configure ports orientation through CC detection  Supports VCONN to power active cables and other accessories  Supports over‐current protection and over‐voltage protection for VCONN  Allow both pin control and I²C interface         Integrated power switches, high‐precision resistors and current sources for CC pins  Provides support for default current, 1.5A and 3A modes with I²C control  Output indicator for plug‐in detection  Power saving mode  Wide power supply range : 2.7V – 5.5V  Temperature Range: 0°C to 85°C  Packaging (Pb‐free & Green):  o 24‐ contact, TQFN(2mm x 4mm)  Application     Notebooks  Mobile Phones  Tablets  Docking Station  Product Specifications   Analog or Digital?  Analog  Configuration    Differential Channels    HotInsertion  No  Lanes    OtherFeatures  NA  RailToRail  No  Signal Type    Single Ended Channels    Type  NA  Voltage    2.7 ‐ 5.5      https://www.diodes.com/products/connectivity-and-timing/switches-mux/protocol-switche... 2/14/2017