PI5USB31213AXEAEX

A product Line of Diodes Incorporated PRODUCT BRIEF PI5USB31213A Type-CTM Dual Role Port Controller with USB3.1 Gen2 10Gbps Mux Features Description The PI5USB31213A is a 10Gbps dual differential channel bidirectional multiplexer/de-multiplexer switch solution for USB 3.1 Gen2 Type-C connector applications. PI5USB31213A switches between the USB controller and the new Type-C connector. It supports host mode, device mode and dual-role mode ports with automatic configuration based on the voltage levels detected on CC pin. It offers excellent signal integrity for high-speed signals at low power dissipation. ¼¼Compatible to USB Type-CTM Specification PI5USB31213A supports both pin and I2C control base on ADDR pin setting. In pin control mode, the PORT input pin determines the port setting, whether this is a host, device or dual-role port. In host mode, the system can monitor ID pin to know the connector status while default current mode is set. Systems running in device mode can monitor system VBUS for connector status as well as OUT1 and OUT2 pins for host’s charging profile capability. ¼¼Supports over-current protection and over-voltage protection Enabling I2C control mode allow high flexibility for port control and communications through registers read/write in PI5USB31213A. There is also flexibility to support Default, 1.5A and 3A current modes. An interrupt signal for indicating changes with the I2C registers is sent to the master to notify the system any change in the Type-C connector while in parallel the system can still moni- ¼¼Dual Differential Channel, 10Gbps 2:1 USB 3.1 Gen 2 Mux/ DeMux ¼¼Switches USB controller and Type-C connector ¼¼Supports Host-mode/Device-mode/Dual-role mode ¼¼Auto-configure ports orientation through CC detection ¼¼Supports VBUS powered Device (UFP) applications ¼¼Supports VCONN to power active cables and other accessories for VCONN ¼¼Audio and Debug Accessory Support ¼¼Supports for Try.SRC and Try.SNK DRP Modes ¼¼Allow both pin control and I2C interface ¼¼Integrated power switches, high-precision resistors and current sources for CC pins ¼¼Provides support for default current, 1.5A and 3A modes with I2C control ¼¼Output indicator for plug-in detection ¼¼Power saving mode ¼¼Wide power supply range : 2.7V – 5.5V ¼¼Temperature Range: -40oC to 85oC ¼¼Packaging (Pb-free & Green): tor ID pin. Applications Block Diagram ¼¼ Notebooks ¼¼ Industrial PC ¼¼ Mobile Phones ¼¼ IP Cameras ¼¼ Tablets ¼¼ LTE Router ¼¼ Docking Station ¼¼ External Storage – 24- contact, TQFN(2mm x 4mm) Ordering Information Part Number Package PI5USB31213AXEAEX XEA Description 24-contact, Extra Thin Fine Pitch QFN (X1QFN) Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/ EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimonyfree, “Green” and Lead-free. Thermal characteristics can be found on the company web site at www.diodes.com/design/support/packaging/ 3. E = Pb-free and Green 4. X suffix = Tape/Reel diodes.com | 1-408-232-9100 Page 1 of 1