0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
PI74AVC+16244AE

PI74AVC+16244AE

  • 厂商:

    BCDSEMI(美台)

  • 封装:

    TSSOP48_12.5X6.1MM

  • 描述:

    IC BUF NON-INVERT 3.6V 48TSSOP

  • 详情介绍
  • 数据手册
  • 价格&库存
PI74AVC+16244AE 数据手册
PI74AVC+16244 2.5V 16-Bit Buffer Driver with 3-State Outputs Product Features Product Description • PI74AVC+16244 is designed for low-voltage operation, VCC = 1.65V to 3.6V PI74AVC+16244 is a non-inverting 16-bit buffer/driver designed for low-voltage 1.65V to 3.6V VCC operation. • True ±24mA Balanced Drive @ 3.3V The buffer/driver is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. • Compatible with Philips and T.I. AVC Logic family • IOFF supports partial power-down operation The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides non-inverting outputs and symmetrical active-low output-enable (OE) inputs. • 3.6V I/O Tolerant inputs and outputs • All outputs contain a patented DDC (Dynamic Drive Control) circuit that reduces noise without degrading propagation delay To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor in which the minimum value is determined by the current-sinking capability of the driver. • Industrial operation: –40°C to +85°C • Packaging (Pb-free & Green available): – 48-pin 240-mil wide plastic TSSOP – 48-pin 173-mil wide plastic TVSOP Logic Block Diagram 1OE 1A1 1A2 1A3 1A4 2OE 2A1 2A2 2A3 2A4 08-0291 1 3OE 47 2 46 3 44 5 43 6 1Y1 3A1 1Y2 3A2 1Y3 3A3 1Y4 3A4 48 4OE 41 8 2Y1 40 9 38 11 37 12 4A1 2Y2 4A2 2Y3 4A3 2Y4 4A4 1 25 36 13 35 14 33 16 32 17 3Y1 3Y2 3Y3 3Y4 24 30 19 29 20 27 22 26 23 4Y1 4Y2 4Y3 4Y4 PS8507C 11/06/08 PI74AVC+16244 2.5V 16-Bit Buffer Driver with 3-State Outputs 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Product Pin Description Pin Name Supply voltage range, VCC .............................. –0.5V to +4.6V Input voltage range, VI .................................... –0.5V to +4.6V Voltage range applied to any output in the high-impedance or power-off state, VO(1) ........ –0.5V to +4.6V Voltage range applied to any output in the high or low state, VO(1,2) ............................ –0.5V to VCC +0.5V Input clamp current, IIK (VI
PI74AVC+16244AE
物料型号:PI74AVC+16244

器件简介: - 设计用于1.65V至3.6V的低电压操作。 - 真正的±24mA平衡驱动 @ 3.3V。 - 兼容Philips和T.I. AVC逻辑系列。 - IOFF支持部分断电操作。 - 3.6V输入和输出耐压。 - 所有输出都包含专利DDC(动态驱动控制)电路,可在不降低传播延迟的情况下降低噪声。 - 工业级操作温度范围:-40°C至+85°C。 - 封装类型:48引脚240-mil宽塑料TSSOP和48引脚173-mil宽塑料TVSOP。

引脚分配: - nOE:3态输出使能输入(低电平有效)。 - nAx:输入。 - nYx:3态输出。 - GND:地。 - VCC:电源。

参数特性: - 供电电压范围:-0.5V至+4.6V。 - 输入电压范围:-0.5V至+4.6V。 - 输出电流:±50mA。 - 每个VCC或GND的连续电流:±100mA。 - 封装热阻:θJA(3): 64°C/W(封装A),48°C/W(封装K)。

功能详解: - 该器件是一个非反相16位缓冲/驱动器,设计用于提高3态存储器地址驱动器、时钟驱动器和面向总线的接收器和发射器的性能和密度。 - 可以作为四个4位缓冲器、两个8位缓冲器或一个16位缓冲器使用。 - 提供非反相输出和对称的低电平有效的输出使能(OE)输入。

应用信息: - 适用于提高3态存储器地址驱动器、时钟驱动器和面向总线的接收器和发射器的性能和密度。

封装信息: - 存储温度范围:-65°C至150°C。 - 封装类型:48引脚240-mil宽塑料TSSOP(无铅和绿色版本可用)。
PI74AVC+16244AE 价格&库存

很抱歉,暂时无法提供与“PI74AVC+16244AE”相匹配的价格&库存,您可以联系我们找货

免费人工找货