PI74ST1G08CEX

PI74ST1G08 SOTiny™ 2-Input and Gate Features Description • High-speed: tPD = 1.8ns typical The PI74ST1G08 is a 2-Input AND Gate that operates over the 1.8V to 3.6V VCC operating range. • Broad operating range: VCC = 1.8V – 3.6V • Power down high-impedance inputs/outputs • High output drive: ±24mA at 3V VCC • Packaging (Pb-free & Green available): – 5-pin SOT23 (T) – 5-pin SC70 (C) Pin Configuration Block Diagram AIN 1 BIN 2 GND 3 5 VCC AIN 4 YOUT BIN YOUT Recommended Operating Conditions(1) Pin Description Pin Name Description AIN Input Supply Voltage (VCC) BIN Input YOUT Output Parameter Inputs Outputs AIN BIN YOUT L L H H L H L H L L L H Min. Max. Units 1.8 3.6 Input Voltage (VIN) 0 5.5 Output Voltage (VOUT) 0 VCC Operating Temperature -40 85 VCC = 1.8V, 2.5V ±0.2V 0 20 VCC = 3.3V ±0.3V 0 10 Input Rise and Fall Time (tr, tf) Function Table Condition V ºC ns/V Notes: 1. Unused inputs must be held HIGH or LOW. They may not float. Notes: H = HIGH Logic Level L = LOW Logic Level 09-0002 1 PS8517I 11/06/09 PI74ST1G08 SOTiny Gate ST 2-Input ™ Absolute Maximum Ratings Supply Voltage (VCC) ........................................................ –0.5V to +4V DC Input Voltage (VIN) ...................................................... –0.5V to +6V DC Output Voltage (VOUT) ................................................ –0.5V to +6V DC Input Diode Current (IIK)........................................–50mA to 20mA DC Output Diode Current (IOK) ....................................–50mA to 20mA DC Output Current (IOUT) .......................................................... ±50mA DC VCC/GND Current (ICC/IGND) .............................................. ±50mA Storage Temperature (TSTG) ........................................ –65°C to +150°C Junction Lead Temperature (IOS) .................................................. 200°C Power Dissipation SOT23 ...........................................................200mW SC70 ...........................................................150mW Note: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Pericom does not recommend operation outside datasheet specifications. DC Electrical Characteristics (Over supply voltage and operating temperature ranges, unless otherwise specified) Symbol Parameter VCC(V) Min. VIH HIGH Level Input Voltage 1.8 2.3-3.6 VIL LOW Level Input Voltage 1.8 2.3-3.6 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IIN Input Leakage Current 1.8 2.3 3.0 2.3 3.0 3.0 Max. Min. Max. 0.25VCC 0.30VCC VIN = VIH IOH = -100μA 1.7 2.2 2.9 1.79 2.29 2.99 1.7 2.2 2.9 IOH = -8mA IOH = -16mA IOH = -24mA 1.9 2.4 2.3 2.13 2.71 2.55 1.9 2.4 2.3 VIN = VIL V IOL = 100μA 0.01 0.01 0.00 0.1 0.1 0.1 0.1 0.1 0.1 IOH = 8mA IOH = 16mA IOH = 24mA 0.10 0.18 0.28 0.3 0.4 0.55 0.3 0.4 0.55 0-3.6 VIN = 5.5V, GND -1 1 -1 1 -1 1 -1 1 Power Off Leakage Current 0.0 VIN or VOUT = 5.5V ICC Quienscent Supply Current 1.8-3.6 VIN = 5.5V, GND 2.0 2 Units 0.75VCC 0.70VCC 0.25VCC 0.30VCC IOFF 09-0002 Typ. 0.75VCC 0.70VCC 2.3 3.0 3.0 1.8 2.3 3.0 TA = -40º C to +85ºC TA = +25ºC Conditions μA 20 PS8517I 11/06/09 PI74ST1G08 SOTiny Gate ST 2-Input ™ AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay VCC(V) Conditions 1.8 2.5±0.2 3.3±0.3 tPLH tPHL Propagation Delay 3.3±0.3 CIN Input Capacitance VIN = 0 CPD(1) Power Dissipation Capacitance 3.3 TA = +25ºC TA = -40º C to +85ºC Min. Typ. Max. Min. Max CL = 15pF, RL = 1MΩ 2.2 0.8 0.5 3.0 1.9 1.3 4.0 2.6 2.2 2.0 0.8 0.5 4.4 2.8 2.5 CL = 50pF, RL = 500Ω 1.5 2.9 3.8 1.5 4.2 Units Fig. No. 1 3 ns 1 3 4 Note 3 pF 20 2 Notes: 1. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle (see Figure 2). CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICC static). AC Loading and Waveforms VCC tr = 3ns Input CL VCC 90% 90% Output tf = 3ns Input 50% RL 50% 10% 10% GND tW tPLH tPHL CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500ns VOH Figure 1. AC Test Circuit Output 50% 50% VCC VOL A Figure 3. AC Waveforms Input Input = AC Waveform; tr = tf = 1.8ns; PRR = 10 MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 09-0002 3 PS8517I 11/06/09 PI74ST1G08 SOTiny Gate ST 2-Input ™ DATE: 10/19/09 DESCRIPTION: 5-pin, Small Outline Transistor Plastic Package (SOT23) PACKAGE CODE: T (T5) DOCUMENT CONTROL #: PD-1911 REVISION: C 09-0130 09-0002 4 PS8517I 11/06/09 PI74ST1G08 SOTiny Gate ST 2-Input ™ DOCUMENT CONTROL NO. PD - 1901 REVISION: D .079 2.00 BSC .051 1.30 BSC 5 4 DATE: 03/09/05 .083 2.10 BSC .049 1.25 BSC 1 2 .026 0.65 BSC VIEW A 3 GUAGE PLANE .006 .011 0.15 0.30 SEATING PLANE 4˚-10˚ .010 .018 0.26 0.46 1.10 MAX .321 BSC 0.15 0˚-8˚ .017 0.42 REV SEATING PLANE 0 0 .004 0.10 XXX DENOTES DIMENSIONS XXX IN MILLIMETERS Pericom Semiconductor Corporation 3545 N. 1st Street, San Jose, CA 95134 1-800-435-2335 • www.pericom.com Notes: 1. Controlling dimensions in millimeters 2. Ref: JEDEC MO-203B/AA 3. Package Outline Exclusive of Mold Flash and Metal Burr DESCRIPTION: 5-Pin, SC70 PACKAGE CODE: C Note: • For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php Ordering Information Ordering Code PI74ST1G08TEX PI74ST1G08CEX Package Code T C Package Description Pb-free & Green, 5-pin SOT23 Pb-free & Green, 5-pin SC70 Top Marking A8 A8 Notes: • Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ • E = Pb-free and Green • X Suffix = Tape and Reel Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com 09-0002 5 PS8517I 11/06/09