PI74STX1G32CX

PI74STX1G32 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 SOTiny™ Gate STX 2-Input OR Features Description • High-speed: tPD = 2.5ns typical into 50pF @ 5V VCC The PI74STX1G32 is a 2-input OR gate that operates over the 1.65V to 5.5V VCC operating range. • Broad operating range: VCC = 1.65V – 5.5V Pericom’s PI74STX series of products are produced using the Company’s advanced submicron technology. • Power down high-impedance inputs/outputs • High output drive: ±24mA at 3V VCC • Package: 5-pin space saving SOT23 and SC70 Block Diagram Pinout AIN 1 BIN 2 5-Pin T, C GND 3 5 VCC AIN 4 YOUT BIN YOUT Recommended Operating Conditions(1) Pin Description Parame te r Pin Name s De s cription AIN Input Supply Voltage (VCC) BIN Input YOUT Output Function Table Inputs BIN YOUT L L H H L H L H L H H H 5.5 Input Voltage (VIN) 0 5.5 Output Voltage (VOUT) 0 VCC Operating Temperature –40 85 VCC = 1.8V, 2.5V±0.2V 0 20 VCC = 3.3V, ±0.3V 0 10 VCC =5.0V, ±0.5V 0 5 Input Rise and Fall Time (tr,tf) Note: H = HIGH Logic Level L = LOW Logic Level M in. M ax. 1.65 Output AIN Condition Units V °C ns/V Note: 1. Unused inputs must be held HIGH or LOW. They may not float. 1 PS8566 08/23/01 PI74STX1G32 SOTiny™ Gate STX 2-Input OR 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Absolute Maximum Ratings Supply Voltage (VCC) .......................................... –0.5V to +6V DC Input Voltage (VIN) ....................................... –0.5V to +6V DC Output Voltage (VOUT) ................................. –0.5V to +6V DC Input Diode Current (IIK) ........................ –50mA to 20mA DC Output Diode Current (IOK) .................... –50mA to 20mA DC Output Current (IOUT) ........................................... ±50mA DC VCC/GND Current (ICC/IGND) ................................ ±50mA Storage Temperature (TSTG) .......................... –65°C to +150°C Junction Lead Temperature (IOS) ................................... 200°C Power Dissipation SOT23 ............................................ 200mW SC70 ............................................... 150mW Note: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Pericom does not recommend operation outside datasheet specifications. DC Electrical Characteristics (Over supply voltage and operating temperature ranges, unless otherwise specified) Symbol Parame te r VCC (V) VIH HIGH Level Input Voltage 1.65- 1.95 2.3- 5.5 VIL LOW Level Input Voltage 1.65- 1.95 2.3- 5.5 VOH HIGH Level Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current 1.65 1.8 2.3 3.0 4.5 TA = +25°C Conditions M in. Typ. TA = –40 to +85°C M ax. 0.75VCC 0.70VCC M in. 0.25VCC 0.30VCC IOH = –100µA 1.55 1.7 2.2 2. 4.4 1.65 1.79 2.29 2.99 4.5 1.55 1.9 2.4 2.3 4.4 IOH = IOH = IOH = IOH = IOH = 1.29 1.9 2.4 2.3 3.8 1.52 2.13 2.71 2.55 4.20 1.29 1.9 2.4 2.3 3.8 –4mA –8mA –16mA –24mA –32mA VIN = VIH IOL = 100µA V 0.01 0.01 0.01 0.00 0.00 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.08 0.10 0.18 0.28 0.28 0.24 0.3 0.4 0.55 0.55 0.24 0.3 0.4 0.55 0.55 1.65 2.3 3.0 3.0 4.5 IOL = IOL = IOL = IOL = IOL = 0- 5.5 VIN = 5.5V, GND –1 1 –1 1 VIN or VOUT = 5.5V –1 1 –1 1 0.0 4mA 8mA 16mA 24mA 32mA 1.65- 5.5 VIN = 5.5V, GND 2.0 2 Units 0.75VCC 0.70VCC 0.25VCC 0.30VCC VIN = VIL M ax. µA 20 PS8566 08/23/01 PI74STX1G32 SOTiny™ Gate STX 2-Input OR 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 AC Electrical Characteristics TA = +25°C Symbol tPLH, tPHL Parame te r Propagation Delay VCC (V) Conditions 1.8 ±0.15 2.5 ±0.2 3.3 ±0.3 5.0 ±0.5 CL = 15pF, RL = 1M ohm CL = 50pF, RL = 500 ohms tPLH, tPHL Propagation Delay 3.3 ±0.3 5.0 ±0.5 CIN Input Capacitance 0 CPD Power Dissipation Capacitance (3) 3.3 5.0 TA = –40 to +85°C M in. Typ. M ax. M in. M ax. 0.7 0.5 0.5 0.5 5.8 3.4 2.6 2.0 7.0 4.3 3.5 2.6 0.7 0.5 0.5 0.5 7.7 4.7 3.9 2.9 0.5 0.5 3.4 2.5 4.7 3.5 1.5 0.8 5.1 3.9 VIN = 0 Units Fig. N o. 1 3 ns 1 3 4 pF 24 30 2 Notes: 3. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle (see Figure 2). CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICC static). AC Loading and Waveforms VCC tr = 3ns Input CL VCC 90% 90% Output tf = 3ns Input 50% RL 50% 10% 10% GND tW tPHL tPLH CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500ns VOH Figure 1. AC Test Circuit Output 50% VCC 50% VOL A Figure 3. AC Waveforms Input Input = AC Waveform; tr = tf = 1.8ns; PRR = 10 MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 3 PS8566 08/23/01 PI74STX1G32 SOTiny™ Gate STX 2-Input OR 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 5-Pin SOT23 (T) Package .075 1.90 BSC 5 4 .059 1.50 .102 2.60 .068 1.75 .1183.00 1 2 3 0º - 10º Datum "A" .004 0.10 .023 0.60 .037 0.95 BSC .014 0.35 .019 0.50 X.XX DENOTES DIMENSIONS X.XX IN MILIMETERS .110 2.80 .118 3.00 .057 1.45MAX. SEATING PLANE .000 0.00 .005 0.15 5-Pin SC70 Package (C) .079 2.00 BSC .051 1.30 BSC 5 4 .049 1.25 BSC .083 2.10 BSC 1 2 .026 0.65 BSC VIEW A 3 GUAGE PLANE .006 .011 0.15 0.30 SEATING PLANE .010 .018 0.26 0.46 4˚-10˚ .321 BSC 0.15 0˚-8˚ .017 0.42 REV 1.10 MAX SEATING PLANE 0 0 .004 0.10 XXX DENOTES DIMENSIONS XXX IN MILLIMETERS Notes: 1. Controlling dimensions in millimeters 2. Ref: JEDEC MO-203AA Ordering Information Part Pin-Package Top M arking Ope rating Range PI74STX1G32TX 5- Pin - SO T23 X20 –40ºC to 85ºC PI74STX1G32CX 5- Pin - SC70 X20 –40ºC to 85ºC Pericom Semiconductor Corporation 2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com 4 PS8566 08/23/01