PI74STX1GU04CEX

PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter Description Features • • • • • • – – – High-speed: tPD = 2.6ns typical into 50pF @ 5V VDD Unbuffered Output Broad operating range: VDD = 1.65V – 5.5V Power down high-impedance inputs/outputs Balanced output drive: ±8mA at 3V VDD Packaging (Pb-free & Green available): 5-pin SOT23(T) 5-pin SC70(C) 6-pin UDFN(ZR) The PI74STX1GU04 is an unbuffered inverter that operates over the 1.65V to 5.5V VDD operating range. Pinout Pin Configuration NC 1 5 VDD 4 YOUT AIN YOUT AIN 2 GND 3 Recommended Operating Conditions YOUT NC GND 09-0002 1 2 3 6 5 4 Parameter Supply Voltage (VDD) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature Input Rise and Fall Time (tr,tf) VDD NC Condition VDD = 1.8V, 2.5V±0.2V VDD = 3.3V, ±0.3V VDD =5.0V, ±0.5V Min. 1.65 Max. 5.5 Units V 0 5.5 0 VDD –40 85 °C 0 20 ns/V 0 10 0 5 Notes: 1. Unused inputs must be held HIGH or LOW. They may not float. AIN 1 PS8562E 11/06/09 PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter Pin Description Pin Names AIN YOUT Functiom Table Input AIN L H Description Input Output Output YOUT H L Notes: H = HIGH Logic Level L = LOW Logic Level Absolute Maximum Ratings Supply Voltage (VDD) ......................................................... –0.5V to +6V DC Input Voltage (VIN) ........................................................ –0.5V to +6V DC Output Voltage (VOUT) ................................................. –0.5V to +6V DC Input Diode Current (IIK) ........................................ –50mA to 20mA DC Output Diode Current (IOK) .................................... –50mA to 20mA DC Output Current (IOUT) ........................................................... ±50mA DC VCC/GND Current (ICC/IGND) ............................................ ±50mA Storage Temperature (TSTG).......................................... –65°C to +150°C Junction Lead Temperature (IOS) .....................................................200°C Power Dissipation SOT23............................................................. 200mW SC70............................................................. 150mW 09-0002 2 Note: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Pericom does not recommend operation outside datasheet specifications. PS8562E 11/06/09 PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter DC Electrical Characteristics Symbol VIH VIL VOH VOL IIN IOFF ICC Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage Input Leakage Current Power Off Leakage Current Quiescent Supply Current 09-0002 VDD (V) Description TA = +25°C Min. Typ 0.85 VDD 0.8 VDD 1.8-2.7 3.0-5.5 1.8-2.7 3.0-5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 0 to 5.5 0.0 Max. TA = -40 to +85°C Min. Max. 0.85 VDD 0.8 VDD 0.15 VDD 0.2 VDD VIN = VIL IOH = -100μA VIN = VIH IOH = -4mA IOH = -4mA IOH = -8mA IOH = -12mA IOH = -16mA IOH = 100μA 1.55 1,6 2.1 2.7 4.0 1.29 1.9 2.4 2.3 3.8 IOH = 4mA IOH = 4mA IOH = 8mA IOH = 12mA IOH = 16mA VIN = 5.5V, GND VIN or VOUT = 5.5V -1 1.65 - 5.5 VIN = 5.5V, GND 1.65 1.8 2.3 3.0 4.4 1.42 2.14 2.75 2.61 4.07 0.00 0.00 0.00 0.00 0.00 0.08 0.10 0.48 0.28 0.31 V 0.15 VDD 0.2 VDD 1.55 1,6 2.1 2.7 4.0 1.29 1.9 2.4 2.3 3.8 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 ±1 1 2.0 3 Units 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 ±10 -1 μA 1 20 PS8562E 11/06/09 PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter AC Electrical Characteristics Symbol Parameter VCC (V) tPLH tPHL Propagation Delay tPLH tPHL CIN Propagation Delay 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 0 Input Capacitance Power Dissipation Capacitance1 CPD Conditions TA = +25°C CL = 15pF, RL = 1M-ohm CL = 50pF, RL = 500-ohm 3.3 5.0 TA =-25°C to +85°C Units Min. Typ. Max. Min. Max. 0.7 0.5 0.5 0.5 0.5 0.5 5.0 3.0 2.3 1.8 3.2 2.6 4 6.3 3.7 3.0 2.4 4.5 3.4 0.7 0.5 0.5 0.5 0.5 0.5 6.9 4.1 3.3 2.6 5.0 3.7 Fig. No. ns 1 3 1 3 pF 6.3 9.5 2 Notes: 1. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle (see Figure 2). CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICC static). AC Loading and Waveforms VCC tr = 3ns Output Input CL VCC 90% 90% RL tf = 3ns Input 50% 50% 10% CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500ns 10% GND tW tPHL tPLH VOH Figure 1. AC Loading and Waveforms Output VCC 50% 50% VOL A Input Figure 3. AC Waveform Application Note: When operating the PI74STX1GU04A's unbuffered output stage in its linear region, as in oscillator applications, the maximum power ratings of the device and package need to be carefully observed. The high drive design of the out put stage can cause substantial simultaneous condition currents when the stage is in its linear region. See ICCPEAK Specification on page 2. Input = AC Waveform; tr = tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 09-0002 4 PS8562E 11/06/09 PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter Packaging Mechanical: 5-Pin SOT23 (T) DATE: 10/19/09 DESCRIPTION: 5-pin, Small Outline Transistor Plastic Package (SOT23) PACKAGE CODE: T (T5) DOCUMENT CONTROL #: PD-1911 REVISION: C 09-0130 09-0002 5 PS8562E 11/06/09 PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter DOCUMENT CONTROL NO. PD - 1901 REVISION: D .079 2.00 BSC .051 1.30 BSC 5 4 DATE: 03/09/05 .083 2.10 BSC .049 1.25 BSC 1 2 .026 0.65 BSC VIEW A 3 GUAGE PLANE .006 .011 0.15 0.30 SEATING PLANE 4˚-10˚ .010 .018 0.26 0.46 1.10 MAX .321 BSC 0.15 0˚-8˚ .017 0.42 REV SEATING PLANE 0 0 .004 0.10 XXX DENOTES DIMENSIONS XXX IN MILLIMETERS Pericom Semiconductor Corporation 3545 N. 1st Street, San Jose, CA 95134 1-800-435-2335 • www.pericom.com Notes: 1. Controlling dimensions in millimeters 2. Ref: JEDEC MO-203B/AA 3. Package Outline Exclusive of Mold Flash and Metal Burr DESCRIPTION: 5-Pin, SC70 PACKAGE CODE: C 09-0002 6 PS8562E 11/06/09 PI74STX1GU04 SOTiny™ Gate STX Unbuffered Inverter DATE: 01/28/08 DESCRIPTION: 6-contact, UltraThin Fine Pitch Dual Flat No Lead (UDFN) PACKAGE CODE: ZR6 DOCUMENT CONTROL #: PD-2074 REVISION: -- 08-0035 Note: • For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php Ordering Information(1-3) Ordering Code Package Code Package Description Top Marking PI74STX1GU04TEX T 5-pin SOT23, Pb-free & Green BH PI74STX1GU04CEX C 5-pin SC70, Pb-free & Green BH PI74STX1GU04ZREX ZR 6-pin UDFN, Pb-Free and Green BH Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. E = Pb-free and Green 3. Adding an X suffix = Tape/Reel Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com 09-0002 7 PS8562E 11/06/09