PI7C9X2G606PRBEVB

Product: Gen2 PCIe® 4-Port/4-Lane SlimLineTM Packet Switch Part Numbers: PI7C9X2G404SL Product Description Clock to corresponding circuit is turned off when any port enters L1 or ASPM L1 Supports Access Control Service (ACS) for peer-topeer traffic Supports Address Translation (AT) packet for SR-IOV application Supports Latency Tolerance Reporting (LTR) to improve Platform Power Management Supports Optimized Buffer Flush Fill (OBFF) to improve Platform Power Management o The PI7C9X2G404SL is a PCI Express® 2.1 4-port/4-lane PCI Express SlimLineTM Packet Switch specifically designed to meet the latest low-power, lead (Pb)-free and green system requirements. The PI7C9X2G404SL is a high-performance, cost-effective solution that can be implemented in systems such as Embedded system, Wi-Fi router/ gateway,, Printer, Storage, combo card, HBA, set-top box, motherboard, laptop, docking station, and other power-sensitive high performance platforms. The name of the family, SlimLineTM, refers to Pericom’s proprietary power-saving PowerSaveTM technology. The PI7C9X2G404SL provides one upstream port and three x1 downstream ports. The PI7C9X2G404SL provides users the flexibility to expand or fan-out from a wide range of I/O Bridges such as PCH, ICH, IOH, embedded MCU, FPGA, and other Application Specific ICs. o o o o Applications Wireless AP/ Router Wire/ Wireless Tele/ data communication Embedded system Set-top box and consumer devices Industrial control NAS/ Storage Printer/ MFP Peripheral PCIe Surveillance and Combo cards Notebook internal PCIe fan-out PC Motherboard PCIe slot expansion Industry Specifications Compliance PCI Express® Base Specification, Revision 2.1 PCI Express CEM Specification, Revision 2.0 PCI-to-PCI Bridge Architecture Spec., Rev 1.2 Advanced Configuration Power Interface (ACPI) Specification Host controller Features PCISIG PCI Express 2.1 certificated Integrated 100MHz Clock buffer for each downstream port Reliability, Availability and Serviceability o Supports Data Poisoning and End-to-End CRC o Advanced Error Reporting and Logging o IEEE 1149.6 JTAG interface support Link Power Management o Supports L0, L0s, L1, L2, L2/L3Ready and L3 link power state o Active state power management for L0s and L1 state Device State Power Management o Supports D0, D3Hot and D3Cold o 3.3V Aux Power support in D3Cold power state Supports up to 512-byte maximum payload size Power Dissipation: 0.65 W typical in L0 normal mode and 0.2W typical in L1 mode Industrial Temperature Range: -40o to 85oC MTBF: 50,927,360 hours Package: 128-pin LQFP 14mm x 14mm o Pb free and 100% Green x1 PCIe2 PCIe2 PI7C9X 2G404SL x1 PCIe2 PCIe2 PCIe Endpoint Programmable Driver Current and De-Emphasis Level at each individual port 150ns typical latency for packet running through switch without blocking Supports “Cut-through”(Default) as well as “Store and Forward” mode for switching packets Advanced Power Savings o Empty downstream ports are set to idle 14-0044 PCIe Endpoint PI7C9X2G404SL – Application Example Enhanced Features Page 1 of 1 PCIe Endpoint Order Information † PART NUMBER PACKAGE PI7C9X2G404SLBFDEX† PI7C9X2G404SLBEVB 128 LQFP Board PB-FREE & GREEN TEMPERATURE YES -40oC TO 85oC Evaluation kit for PI7C9X2G404SLB Note: Adding an X suffix =Tape/Reel Pericom Semiconductor Corp. www.pericom.com PCI Express® is a registered trademark of PCI-SIG® www.pcisig.org | SlimLine™ is a trademark of Pericom Semiconductor Corp. 11/12/2014 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pericom: PI7C9X2G606PRBEVB PI7C9X2G404SLBEVB