PR3002G-T

NOT RECOMMENDED FOR NEW DESIGN PR3001G - PR3007G 3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features • • • • • Glass Passivated Die Construction Fast Switching for High Efficiency Surge Overload Rating to 125A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) Mechanical Data • • • • • • • • Case: DO-201AD Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish ⎯ Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Ordering Information: See Page 3 Weight: 1.12 grams (approximate) DO-201AD Dim Min A 25.40 Max ⎯ B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage PR PR PR PR PR PR PR 3001G 3002G 3003G 3004G 3005G 3006G 3007G Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IO 3.0 A IFSM 125 A Forward Voltage @ IF = 3.0A VFM 1.3 V @ TA = 25°C @ TA = 125°C IRM 5.0 100 μA Peak Reverse Current at Rated DC Blocking Voltage (Note 5) 150 250 500 ns Reverse Recovery Time (Note 3) trr Typical Total Capacitance (Note 2) CT 50 pF RθJA 32 °C/W Tj, TSTG -65 to +150 °C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect. DS27003 Rev. 7 - 3 1 of 3 www.diodes.com PR3001G - PR3007G © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 4 Single phase half wave Resistive or Inductive load 3 2 1 0 0 25 50 75 100 125 150 10 1.0 0.1 Tj = 25°C 0.01 175 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 100 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 200 100 10 1 10 1 DS27003 Rev. 7 - 3 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 1 100 2 of 3 www.diodes.com 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance 100 PR3001G - PR3007G © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN Ordering Information (Note 6) Device PR3001G-B PR3001G-T PR3002G-B PR3002G-T PR3003G-B PR3003G-T PR3004G-B PR3004G-T PR3005G-B PR3005G-T PR3006G-B PR3006G-T PR3007G-B PR3007G-T Notes: Packaging DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD DO-201AD Shipping 500/Bulk 1.2K/Tape & Reel, 13-inch 500/Bulk 1.2K/Tape & Reel, 13-inch 500/Bulk 1.2K/Tape & Reel, 13-inch 500/Bulk 1.2K/Tape & Reel, 13-inch 500/Bulk 1.2K/Tape & Reel, 13-inch 500/Bulk 1.2K/Tape & Reel, 13-inch 500/Bulk 1.2K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com DS27003 Rev. 7 - 3 3 of 3 www.diodes.com PR3001G - PR3007G © Diodes Incorporated