PT8A3280/1/2/3/4/5/6/7
Heating Controller
||||||||||||||||
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Features
Description
Dual Voltage (120V/240V) operations
Auto temperature control with NTC
CMOS LSI chip designed as heating controller with help
NTC open protection
of external NTC (Negative Temperature Component).
Multi mode LED indicator
NTC open protection is implemented for device safety.
Proportional control
This device can be used in both 120V and 240V power
Pulse trigger for high current SCR/TRIAC (up to
line supplier, as it will automatically adjust the heating
15mA)
power according to the power line voltage to avoid
Internal Zener
heating appliance damage or long heating time. The
Auto Heating off after heating timer timeout
proportional control algorithm is designed in this
Low cost 8-Pin DIP and SOIC package
product.
Pin Configuration
Applications
PT 8A3270/1/2/3
PT 8A3290/1/2/3
Curler
C1
1
C2
The PT8A3280/1/2/3/4/5/6/7 is a mixed signal
PT 8A3274/5/6/7
PT 8A3294/5/6/7
PT 8A3278/9
PT 8A3288/9
PT 8A3280/1/2/3
PT 8A3284/5/6/7
8
VDD
Straightener
NTC1
1
8
VDD
NTC1
1
8
VDD
NTC1
1
8
VDD
2
7
OFF
NTC2
2
7
LED2
NTC2
2
7
TURBO
NTC2
2
7
LED2
K
3
6
GATE
CLK
3
6
GATE
CLK
3
6
GATE
CLK
3
6
GATE
D
4
5
ON
GND
4
5
ON/OFF
GND
4
5
ON/OFF
GND
4
5
LED1
Pin Description
Pin No.
Pin Name
I/O
Description
1
NTC1
I
NTC voltage input, NTC open detection input
2
NTC2
O
Output signal for NTC open detection
3
CLK
I
Clock input from power line
4
GND
Power
5
LED1
I/O
6
GATE
O
7
LED2
I/O
8
VDD
Power
Ground and Power
3280/1/2/3/4/5/6/7: LED1 driving output
3280/1/2/3: SCR trigger output
3284/5/6/7: TRIAC trigger output
3280/1/2/3/4/5/6/7: LED2 driving output
Ground and Power
12-07-0006
PT0261-1
1
07/06/12
PT8A3280/1/2/3/4/5/6/7
Heating Controller
||||||||||||||||
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Block Diagram
NTC1
Precise
5bit
ADC
OFF/TURBO/LED2
LED2
ADC
GATE
Controller
NTC2
CLK
ON/ON_OFF/LED1
LED1
Maximum Ratings
Storage Temperature ................................................................................... -65oC to +150oC
Supply Voltage to Ground Potential (Input & VCC Only).......................-0.5V to + 5.5V
Supply Voltage to Ground Potential (Outputs)..........................................-0.5V to + 5.5V
DC Input Voltage ............................................................................................-0.5V to + 5.5V
DC Output Current ...................................................................... 20mA
Power Dissipation ......................................................................................................... 500mW
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the
device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure
to absolute maximum rating conditions for extended
periods may affect reliability.
Recommended operation conditions
Symbol
Pin
Parameter
Min
Typ
Max
Unit
Frequency
CLK
Input CLK Frequency
-
50/60
-
Hz
TA
-
Operating temperature
-20
-
85
℃
AC Electrical Characteristics
(VDD = 3.5 ~ 5.5V, TA = -20 ~ 85ºC, unless otherwise noted)
Symbo
l
FCLK
Description
Test Conditions
Frequency of CLK
-
TGATE
Width of trigger pulse
-
Timer
Power off timer
Min
Type
Max
50/60
FCLK= 50Hz
12-07-0006
Hz
160
200
240
S
1.15
1.2
1.25
Hour
PT0261-1
2
Unit
07/06/12
||||||||||||||||
PT8A3280/1/2/3/4/5/6/7
Heating Controller
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DC Electrical Characteristics
(VDD = 3.5 ~ 5.5V, TA = -20 ~ 85ºC, unless otherwise noted)
Symbo
l
IIH
Description
Input high current
Test Conditions
Input low current
Output High current
IOL
Output Low current
Max
Unit
VIN = VDD
-
-
1
A
PIN: NTC1
VIN = VDD
-
-
100
nA
PIN: NTC2
VIN = VDD ,Output
High impedance
-
-
100
nA
VIN = GND
-
-
-1
A
VIN = 0.35V
-
-
-10
A
VIN = GND
-
-
-100
nA
-
-
-100
nA
-15
-
-
mA
2.0
-
-
mA
5.0
-
-
mA
PIN: NTC1
VIN = GND, Output
High impedance
V DD =4.5V
Vout = 2.5V
V DD =4.5V
Vout =0.5V
V DD =4.5V
Vout =0.5V
PIN: NTC2
IOH
Type
PIN: CLK
PIN: CLK
IIL
Min
PIN: GATE
PIN: NTC2
PIN: GATE
VPOR
Voltage of POR
-
1.5
-
2.5
V
VZ
Voltage of Zener
IDD= 500uA ~ 10mA
4.5
5.0
5.5
V
IDD
Current consumption
NTC1,CLK pin tied to ground
V DD = 4.5V
-
-
500
A
12-07-0006
PT0261-1
3
07/06/12
PT8A3280/1/2/3/4/5/6/7
Heating Controller
||||||||||||||||
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Functional Description
State description
Reset
The device will be of reset state after power-on.
Heating on
The device will be heating on after power on.
Heating off
This device enter heating-off state after its power-on reset or heating timer timeout, and all pins will be the same status as after
power-on reset.
NTC open protection
When NTC is open, NTC1 pin will be pulled low in the period of NTC open detected.
Timer
Once IC enters Heating-on State, internal timer starts to count. When time is out after 216000 clock period, it will exit heating-on
state. That is, in case of 60Hz CLK signal, the heating time is about 1 hour; and 1.2 hour for 50Hz.
In heating-on state, temperature is regulated to the selected temperature by the IC through NTC close control loop.
Control signal output
When working in Heating-on state, Gate/LED output will be related to NTC1 input and CLK input amplitude.
Effect of NTC and VTCLK (Level 2) on GATE and LED indication
Workin
g State
CLK
input
voltage
NTC
(NTC open
detection)
NTC
(Normal temp
detection)
GATE
(trigger to
SCR/TRIAC)
LED
LED1
LED2
3280/2/4/6
3280/2/4/6
0 ~ VADC_BIT15
Flash1*
Proportional
High
V ADC_BIT14 ~
output
for
On
V ADC_BIT1
level 2
V ADC_BIT1 ~
(240V)
0
On
VDD
ON
V NTCO~
0 ~ VADC_BIT15
Flash1
Invert of
VDD
Proportional
LED1
Low for
V ADC_BIT14 ~
output
On
level 2
V ADC_BIT1
(120V)
V ADC_BIT1 ~
0
On
VDD
Off
X*
X
0
Off
X
X
0~V NTCO
X
0
Flash2*
*Note: 1) X means any input. 2) Flash1 frequency is 1/32 clock. 3) Flash2 frequency is 1/8 clock
12-07-0006
LED1
LED2
3281/3/5/7
On
3281/3/5/7
Off
On
On
On
On
On
Off
On
On
On
On
Off
Flash2*
Off
Off
PT0261-1
4
07/06/12
PT8A3280/1/2/3/4/5/6/7
Heating Controller
||||||||||||||||
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Application Circuit
PT8A3280/1/2/3 Application circuit
Heater
L
43k(2W)
47u
NTC
10k
RA
LED2
1M
PT 8A3280/1/2/3
NTC1
VDD
NTC2
LED2
OFF
RB
SCR
GATE
GND
LED1
ON
0.1u
CLK
0.1u
LED1
0.1u
10n
8.2k
100
N
PT8A3284/5/6/7 Application circuit
12-07-0006
PT0261-1
5
07/06/12
||||||||||||||||
PT8A3280/1/2/3/4/5/6/7
Heating Controller
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mechanical Information
PE (DIP-8)
Symbol
A
A1
A2
B
B1
c
D
E
E1
e
L
E2
Note:
1) Controlling dimensions in millimeters.
2) Ref : JEDEC MS-001D/BA
12-07-0006
Dimensions In Millimeters
Min
Max
3.710
4.310
0.510
3.200
3.600
0.380
0.570
1.524 BSC
0.204
0.360
9.000
9.400
6.200
6.600
7.320
7.920
2.540 BSC
3.000
3.600
8.400
9.000
PT0261-1
6
07/06/12
||||||||||||||||
PT8A3280/1/2/3/4/5/6/7
Heating Controller
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
WE (SOIC-8)
Symbol
A
A1
A2
b
c
D
E
E1
e
L
θ
Note:
1) Controlling dimensions in millimeters.
2) Ref : JEDEC MS-012E/AA
12-07-0006
Dimensions In Millimeters
Min
Max
1.350
1.750
0.100
0.250
1.350
1.550
0.330
0.510
0.170
0.250
4.700
5.100
3.800
4.000
5.800
6.200
1.27 BSC
0.400
1.270
0°
8°
PT0261-1
7
07/06/12
||||||||||||||||
PT8A3280/1/2/3/4/5/6/7
Heating Controller
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ordering Information
Part No.
PT8A328xPE
PT8A328xWE
Package Code
P
W
Package
Lead free 8-Pin DIP
Lead free and Green 8-Pin SOIC
Note:
“x” shows 0~7 with different function see Function Comparison Table.
E = Pb-free or Pb-free & Green
Adding X Suffix= Tape/Reel
Function Comparison Table
Part number
LED
Timer
Driver
PT8A3280
Flash
Y
SCR
PT8A3281
Constant
Y
SCR
PT8A3282
Flash
N
SCR
PT8A3283
Constant
N
SCR
PT8A3284
Flash
Y
TRIAC
PT8A3285
Constant
Y
TRIAC
PT8A3286
Flash
N
TRIAC
PT8A3287
Constant
N
TRIAC
Pericom Semiconductor Corporation 1-800-435-2336 www.pericom.com
Pericom reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply
the best possible product. Pericom does not assume any responsibility for use of any circuitry described other than the circuitry embodied in Pericom product. The
company makes no representations that circuitry described herein is free from patent infringement or other rights, of Pericom.
12-07-0006
PT0261-1
8
07/06/12
很抱歉,暂时无法提供与“PT8A3287BPEX”相匹配的价格&库存,您可以联系我们找货
免费人工找货