S1750C-33.3330(T)

Crystal Clock Oscillator Technical Data S1700 / S1703 / S1750 Series Frequency Range: 1.8432 MHz to 80 MHz Frequency Stability: ±50 or ±100 ppm over all conditions; calibration tolerance, operating temperature, rated input (supply) voltage change, load change, aging*. 1 year @ 25°C average ambient temperature), shock and vibration. *Aging: Temperature Range: Operating: Storage: 5.0V ±10% (S1700 & S1750) 3.3V ±10% (S1703) Supply Current: S1700: 15mA max 1.8432 to 35MHz 30mA max 35+ to 66MHz 50mA max 66+ to 80MHz S1750: 20mA max 1.8432 to 20MHz 35mA max 20+ to 50MHz 60mA max 50+ to 67MHz S1703: 8mA max 1.8432 to 34MHz (5mA max disable) 12mA max 34+ to 50MHz (8mA max disable) 15mA max 50+ to 64MHz (10mA max disable) 35mA max 64+ to 66.667MHz (23mA max disable) 35mA max 66.667+ to 80MHz (10μA max disable low power standby) Description Applications & Features • Sub-miniature, very low profile package is ideal for SMT applications • Ideal for lead-free soldering • CMOS, HCMOS & TTL compatible • Perfect for PC's; notebook, palmtop computers; portable applications; PCMCIA cards; disc drives. • S1700 for low power 5V application • S1703 for 3.3V operations. Low-power Stand-by above 66.667MHz • S1750 for high output load, higher fanout applications • Available on tape & reel; 16mm tape, 500pcs per reel 0 to +70°C -55 to +125°C Supply Voltage: ACTUAL SIZE The S1700, S1703 and S1750 are crystal-controlled, low-current oscillators providing precise rise and fall times to drive high speed CMOS and TTL loads. The sub-miniature, ceramic package has gold-plated contact pads, ideal for today's pick-and-place SMT environments and lead-free soldering. The S1750 is a high output load version available to 67 MHz. 3.3 & 5V, HCMOS, TTL, SMD Output: TTL (S1750 only) Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load: Period Jitter RMS: HCMOS Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load max: Period Jitter RMS: 40/60% max @ 1.5V 5ns max 0.5 to 2.5V 0.5V max 2.5V min 5 TTL 8ps max 45/55% max @ 50% VDD, 40/60% max for S1703 10ns max, 20% to 80% VDD (5ns max S1703 67+ MHz) 10% VDD max 90% VDD min S1700: 15pF, S1703: 15pF (≤64MHz) & 30pF (64+MHz), S1750: 50pF 8ps max Output Enable Characteristics Output Ocillation (VIN): Output High Impedance (VIN): Disable Output Delay: Enable Output Delay: Internal Pullup Resistance: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: Mechanical: Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Humidity: S1750 S1700 ≥ 2.2V or N/C ≥ 90% VDD or N/C ≤ 10% VDD or GND ≤ 0.8V GND ≤ 100ns ≤ 100ns ≤ 100ns ≤ 100ns ≥ 50kΩ ≥ 50kΩ * 10ms above 66.667 MHz for S1703 S1703 ≥ 2.2V or N/C ≤ 0.5V or GND ≤ 150ns ≤ 150ns* ≥ 50kΩ MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2 MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 www.pericom.com/saronix DS-138 REV H Crystal Clock Oscillator 3.3 & 5V, HCMOS, TTL, SMD Technical Data S1700 / S1703 / S1750 Series Package Details Part Numbering Guide S 1700 C – 50.0000 (T)  MAX  (T) = Tape & Reel full reel increments only Blank = Bulk SaRonix  MAX  Series S1700 = 15pF max load to 80MHz, 5V S1703 = 3.3V S1750 = 50pF max load to 67MHz, 5V Frequency (MHz) Contact SaRonix for developed frequencies  MAX  0AD 4RI 3TATE #ONTROL Stability Tolerance B = ±50 ppm (0 to 70ºC) C = ±100 ppm (0 to 70ºC) Note: use stability B for new designs 0AD '.$       Test Circuit   0AD 6 ## 0AD /54 -ARKING&ORMAT 3 3 3 3A2ONIX &)
 &)
#  3TABILITY#ODE 3# 9977 ! ! ! .  $ "% #
 "!  ! 
8 





1 04*
  $ATE#ODE &)
 &REQUENCY &)
%XACT,OCATIONS-AY6ARY Recommended Land Pattern  ! !!
"! 04*


,/(-5)*3
120'*
&/)
+,6452*
(&1&(,4&/(*



1

40

7


1

40

7
 1
40
7



1

40

7
  
   Output Waveform    '$"
&"
#% Solder Reflow Guide  (
% 
"!%"  



##














 #
 
 
 
   
 
 
 
 
 
 
 
 

!
"
   
 
   "
  
 
#"  "
     www.pericom.com/saronix 
!

 DS-138 REV H