SBG1630CT-T

DISCONTINUED SBG1630CT - SBG1645CT 16A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features • • • • • • • 2 Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 175A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish/RoHS Compliant (Note 3) D PAK Dim E • • • • • • H 4 J B Mechanical Data • • G A 1 2 3 2 Case: D PAK Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Solderable per MIL-STD-202, Method 208 Ordering Information: See Page 2 Polarity: See Diagram Marking: Type Number Weight: 1.7 grams (approximate) M D K C L Min Max A 9.65 10.69 B 14.60 15.88 C 0.51 1.14 D 2.29 2.79 E 4.37 4.83 G 1.14 1.40 H 1.14 1.40 J 8.25 9.25 K 0.30 0.64 L 2.03 2.92 M 2.29 2.79 All Dimensions in mm PIN 1 PIN 2 & 4 PIN 3 Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 4) RMS Reverse Voltage Average Rectified Output Current @ TC = 95°C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Forward Voltage, per Element @ IF = 8.0A Peak Reverse Current @ Tj = 25°C at Rated DC Blocking Voltage (Note 4) @ Tj = 125°C Typical Total Capacitance (Note 2) Typical Thermal Resistance Junction to Case (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. SBG 1630CT SBG 1635CT SBG 1640CT SBG 1645CT Unit 30 35 40 45 V 21 25 28 32 16 V A IFSM 175 A VFM 0.55 V IRM 1.0 50 mA CT RθJC TJ, TSTG 275 3.0 -65 to +125 Symbol VRRM VRWM VR VR(RMS) IO pF °C/W °C Thermal resistance junction to case mounted on heatsink. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC and per element. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Note 7. Short duration pulse test used to minimize self-heating effect. DS30090 Rev. 7 - 4 1 of 2 www.diodes.com SBG1630CT - SBG1645CT © Diodes Incorporated DISCONTINUED Total Package 16 12 Per Element 8 4 0 0 50 100 100 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD CURRENT (A) 20 T j = 125 °C 10 Tj = 25° C 1.0 0.1 150 0 0.8 1000 300 1.2 T j = 25°C f = 1.0MHz 250 200 150 100 50 500 200 100 0 1 10 0.1 100 Ordering Information 10 100 (Note 5) Device SBG1630CT-T-F SBG1635CT-T-F SBG1640CT-T-F SBG1645CT-T-F 5. 1.0 VR, DC REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Surge Current Notes: 0.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, Per Element CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve Packaging 2 D PAK 2 D PAK 2 D PAK 2 D PAK Shipping 800/Tape & Reel, 13-inch 800/Tape & Reel, 13-inch 800/Tape & Reel, 13-inch 800/Tape & Reel, 13-inch For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf. DS30090 Rev. 7 - 4 2 of 2 www.diodes.com SBG1630CT - SBG1645CT © Diodes Incorporated DISCONTINUED IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com DS30090 Rev. 7 - 4 3 of 2 www.diodes.com SBG1630CT - SBG1645CT © Diodes Incorporated