SF10JG-B

NOT RECOMMENDED FOR NEW DESIGN SF10AG - SF10JG 1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features      Glass Passivated Die Construction Super-Fast Switching for High Efficiency Surge Overload Rating to 30A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) Mechanical Data         Case: DO-41 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Ordering Information: See Page 3 Weight: 0.3 grams (approximate) DO-41 Dim Min A 25.40 Max — B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage SF10 SF10 SF10 SF10 SF10 SF10 SF10 SF10 AG BG CG DG FG GG HG JG Unit VRRM VRWM VR 50 100 150 200 300 400 500 600 V VR(RMS) 35 70 105 140 210 280 350 420 V Average Rectified Output Current @ TA = 75C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IO 1.0 A IFSM 30 A Forward Voltage @ IF = 1.0A VFM Peak Reverse Current at Rated DC Blocking Voltage (Note 5) @ TA = 25C @ TA = 100C IRM Reverse Recovery Time (Note 3) trr Typical Total Capacitance (Note 2) CT Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. 0.95 1.3 1.5 10 100 35 A 40 75 V 50 ns 50 pF RJA 75 °C/W Tj, TSTG -65 to +150 C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. Short duration pulse test used to minimize self-heating effect. DS24012 Rev. 5 - 3 1 of 3 www.diodes.com SF10AG - SF10JG © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60Hz resistive or inductive load 0 25 50 75 100 SF10AGSF10DG 10 SF10FGSF10GG 1.0 SF10HGSF10JG 0.1 o Tj = 25 C 0.01 125 150 175 200 0.6 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 30 SF10AG - SF10GG CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.8 20 10 SF10HG - SF10JG 10 Tj = 25°C f = 1.0MHz 1 0 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance trr NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS24012 Rev. 5 - 3 2 of 3 www.diodes.com SF10AG - SF10JG © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN Ordering Information (Note 6) Device SF10AG-A SF10AG -B SF10AG -T SF10BG -A SF10BG -B SF10BG -T SF10CG -A SF10CG -B SF10CG -T SF10DG -A SF10DG -B SF10DG -T SF10FG -A SF10FG -B SF10FG -T SF10GG -A SF10GG -B SF10GG -T SF10HG -A SF10HG -B SF10HG -T SF10JG -A SF10JG -B SF10JG -T Notes: Packaging DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 Shipping 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS24012 Rev. 5 - 3 3 of 3 www.diodes.com SF10AG - SF10JG © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com DS24012 Rev. 5 - 3 4 of 3 www.diodes.com SF10AG - SF10JG © Diodes Incorporated