NOT RECOMMENDED FOR NEW DESIGN
SF30AG - SF30JG
3.0A SUPER-FAST GLASS PASSIVATED RECTIFIER
Features
Glass Passivated Die Construction
Diffused Junction
Super-Fast Switching for High Efficiency
Surge Overload Rating to 125A Peak
Low Reverse Leakage Current
Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
Case: DO-201AD
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish - Tin. Plated Leads Solderable per MIL-STD-202,
Method 208
Polarity: Cathode Band
Marking: Type Number
Ordering Information: See Page 3
Weight: 1.12 grams (approximate)
DO-201AD
Dim
Min
A
25.40
Max
—
B
7.20
9.50
C
1.20
1.30
D
4.80
5.30
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
RMS Reverse Voltage
SF30 SF30 SF30 SF30 SF30 SF30 SF30 SF30
AG
BG
CG
DG
FG
GG
HG
JG
Unit
VRRM
VRWM
VR
50
100
150
200
300
400
500
600
V
VR(RMS)
35
70
100
140
210
280
350
420
V
Average Rectified Output Current
(Note 1)
@ TA = 55C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
IO
3.0
A
IFSM
125
A
Forward Voltage
@ IF = 3.0A
VFM
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
@ TA = 25C
@ TA = 100C
IRM
Reverse Recovery Time (Note 3)
trr
Typical Total Capacitance (Note 2)
CT
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
Notes:
1.
2.
3.
4.
5.
0.95
1.3
1.5
5.0
100
35
A
40
75
V
50
ns
50
pF
RJA
32
°C/W
Tj, TSTG
-65 to +150
C
Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Notes 5 and 7.
Short duration pulse test used to minimize self-heating effect.
DS37836 Rev. 1 - 3
1 of 3
www.diodes.com
SF30AG - SF30JG
© Diodes Incorporated
NOT RECOMMENDED FOR NEW DESIGN
2.4
1.8
1.2
0.6
Single phase half-wave
60Hz resistive or inductive load
0
25
50
75
100
10
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD RECTIFIED
CURRENT (A)
3.0
125
150
175
SF30AG - AF30DG
SF30FG - AF30GG
1.0
SF30HG - AF30JG
0.1
0.01
0.6
200
1.0
1.2
1.4
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
100
150
SF30AGSF30GG
CT, TOTAL CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
TA, AMBIENT TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
0.8
100
50
SF30HGSF30JG
10
Tj = 25°C
f = 1.0MHz
1
0
1
10
1
100
10
100
VR, DC REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
trr
+0.5A
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
Oscilloscope
(Note 1)
-0.25A
(+)
-1.0A
Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS37836 Rev. 1 - 3
2 of 3
www.diodes.com
SF30AG - SF30JG
© Diodes Incorporated
NOT RECOMMENDED FOR NEW DESIGN
Ordering Information (Note 6)
Device
SF30AG-B
SF30AG-T
SF30BG-B
SF30BG-T
SF30CG-B
SF30CG-T
SF30DG-B
SF30DG-T
SF30FG-B
SF30FG-T
SF30GG-B
SF30GG-T
SF30HG-B
SF30HG-T
SF30JG-B
SF30JG-T
Notes:
Packaging
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
DO-201AD
Shipping
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
500/Bulk
1.2K/Tape & Reel, 13-inch
6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.
DS37836 Rev. 1 - 3
3 of 3
www.diodes.com
SF30AG - SF30JG
© Diodes Incorporated
NOT RECOMMENDED FOR NEW DESIGN
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
DS37836 Rev. 1 - 3
4 of 3
www.diodes.com
SF30AG - SF30JG
© Diodes Incorporated