SPA000001

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 100.000000 MHz NOMINAL FREQUENCY HOLDER TYPE TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) SPA000001 CUSTOMER P/N 0 August 5, 2011 ISSUE DATE B VERSION APPROVED PREPARED APPROVED BY CUSTOMER： QA AVL Status Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev. E *RoHS Exemption *HF-Halogen Free *REACH Compliant Page i TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 VERSION HISTORY Verision No. Version Date A Apr.19,2011 Initial Release B Aug.5,2011 Changed TR/TF from 700ps max to 500ps max E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Description Notes Page ii TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 ELECTRICAL SPECIFICATIONS SRe Part Number : SPA000001 Item Symbol Specifications Units Nominal Frequency Fo 100.000000 MHz Frequency Stability FT ± 50 ppm Operating Temperature Range TR -40 to +85 ℃ Supply Voltage VCC +3.3 ± 10.0% V Logic Type LT HCSL Supply Current, Output Enabled ICC/OE 40 mA Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 500 ps Max. measured from Vol=0.175V to Voh=0.525V Output Voltage "0" Level VOL -0.150 V Min. 0.0V Typ. Output Voltage "1" Level VOH 0.900 V Max. 0.660V Min. 0.700V Typ. Rise / Fall Time Output Load Rs=33Ω, Rp=50Ω,CL=2pF Output Phase Jitter-PCIe Gen2 2.5 Notes **See note Max. Typ. In HCSL termination ps RMS Max. Jitter, Phase RMS(1-σ) 1 ps Max. 12KHz ~ 20MHz Frequency Band Jitter, Accumulated RMS(1-σ) 7 ps Typ. 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 40 ps Max. 100,000 Random Periods -55°C to +125°C ℃ Storage Temperature Range ※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (5 years at 40°C Average Effective Ambient Temperature), Shock and Vibration. OUTPUT ENABLE / DISABLE Parameter Input Voltage (Pin1), Output Enable Min. Typ. Max. 2.2 Units Notes V Or Open Input Voltage (Pin1), Output Disable (low power standby) 0.8 V Output is Hi-Z Output Disable Delay 200 ns Output Enable Delay 2 ms E0-R-4-014 Rev. E Page 1 TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 TEST CIRCUIT 33Ω 33Ω OUTPUT WAVEFORM E0-R-4-014 Rev. E Page 2 TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 RELIABILITY SPECIFICATIONS ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: RoHS Compliant by Exemption MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf E0-R-4-014 Rev. E Page 3 TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 MARKING Logo SRe 100.000 H E Y ywwv Dot denotes Pin#1 Frequency Code Date & Factory Code E Y y ww v PIN #1 Connection Model Series Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale:None. Dimensions are in mm.) Recommended Land Pattern* E0-R-4-014 Rev. E Pin Function 1 OE 2 NC 3 VEE 4 OUTPUT 5 OUTPUT N 6 VCC Page 4 TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 TAPE&REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. E Page 5 TYPE SP 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPA000001 VER. B 5-Aug-11 PACKING Begin Close Start End 500pcs-Product Tape Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. E Page 6