TLC27L1CS-13

TLC27L1, TLC27L1A, TLC27L1B CMOS LOW POWER OPERATIONAL AMPLIFIERS Description Pin Assignments The TLC27L1 operational amplifier combines a wide range of input offset-voltage grades with low offset-voltage drift and high input impedance. The TLC27L1 is a low-bias version of the TLC271 programmable amplifier. New Product Three offset-voltage grades are available, ranging from the low-cost TLC27L1 (10mV) to the TLC27L1B (2mV) low-offset version. The devices are offered in both commercial and industrial operating temperature ranges. The extremely high input impedance and low bias currents, in conjunction with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs. The devices also exhibit low-voltage single-supply operation, with a common-mode input-voltage range including the negative rail. Features Applications  The TLC27L1 is the low power version of the TLC271. It offers low power for applications requiring long battery life. For applications that require more performance consider the TLC271. Wide range of supply voltages over specified temperature range: 0°C to +70°C . . . 3 V to 16 V –40°C to +85°C . . . 4 V to 16 V  Single-Supply Operation  Common-Mode Input Voltage Range The TLC27L1 is well suited to many consumer audio, industrial and other low power applications. Consider carefully the bandwidth and slew rate requirements for a specific application. Extends Below the Negative Rail  Low Noise:  68nV/√Hz typical @ f = 1kHz  Output Voltage Range Includes Negative Rail  High Input Impedance   Designed-In Latch-Up Immunity Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3)    Notes: Audio Microphone Preamplifier Filtering – Equalizers Signal Amplification Industrial Power Supply Instrumentation Metering Medical Portable Meters and Measurement Instrumentation 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, “Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain