UX52F6204Z

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 156.250000 MHz NOMINAL FREQUENCY PRODUCT TYPE TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) UX52F6204Z CUSTOMER P/N 0 December 18, 2013 ISSUE DATE A VERSION APPROVED PREPARED QA AVL Status APPROVED BY CUSTOMER： Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw E0-R-4-014 Rev. E *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant Page i TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 VERSION HISTORY Version No. Version Date A Dec.18,2013 E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Description Notes Initial Release Page ii TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 ELECTRICAL SPECIFICATIONS SRe Part Number : Item UX52F6204Z Symbol Specifications Units Nominal Frequency Fo 156.250000 MHz Frequency Stability FT ± 50 ppm Operating Temperature Range TR -40 to +85 °C Supply Voltage VCC +3.3 ± 10.0% V Logic Type LT LVPECL Notes **See note Supply Current, Output Enabled ICC/OE 75 mA Max. Supply Current, Output Disabled ICC/OD 25 uA Max. DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 0.85 ns Max. measured 20/80% of Waveform Duty Cycle (Symmetry) Rise / Fall Time Output Voltage "0" Level VOL VCC -1.620V V Max. Output Voltage "1" Level VOH VCC -1.025V V Min. 50Ω to VCC -2V Output Load Jitter, Phase RMS 0.2 ps Max. 12KHz~20MHz Frequency Band Jitter, Phase RMS 0.1 / 0.2 ps Typ./Max., 10KHz~1MHz Frequency Band Jitter, Peak to Peak Pk-Pk 40 ps Max. 100,000 Random Periods 10 ms Max. -55 to +125 °C Start Up Time Storage Temperature Range ※ This product doesn't include harmful substance that stipulated by SONY SS-00259 Level 1 and S-AT2-001 Level 1 standard. RoHS Compliant (Pb - Free). **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (1 year at 25°C Average Effective Ambient Temperature), Shock and Vibration. Output Enable / Disable Function Parameter Input Voltage (Pin1), Output Enable Input Voltage (Pin1), Output Disable (low power standby) Min. Typ. Max. 0.7VCC 0.3VCC Units V V Output is Hi-Z Output Disable Delay 200 ns Output Enable Delay 2 ms E0-R-4-014 Rev. E Notes Or Open Page 1 TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 TEST CIRCUIT OUTPUT WAVEFORM E0-R-4-014 Rev. E Page 2 TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 RELIABILITY SPECIFICATIONS ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: Pb - free and RoHS/Green Compliant. MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf E0-R-4-014 Rev. E Page 3 TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 MARKING Logo Frequency Code SRe15GPU E N ywwv Dot denotes Pin#1 Date & Factory Code E N y ww v PIN #1 Connection Model Series Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale:None. Dimensions are in mm.) Recommended Land Pattern* Pin Function 1 OE 2 3 NC VEE 4 OUTPUT 5 OUTPUT N VCC 6 E0-R-4-014 Rev. E Page 4 TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 TAPE&REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. E Page 5 TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX52F6204Z VER. A 18-Dec-13 PACKING Begin Close Start End 500pcs-Product Tape Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. E Page 6