UX72F6214Z

PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER 156.250000 MHz NOMINAL FREQUENCY PRODUCT TYPE TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) UX72F6214Z CUSTOMER P/N 0 May 14, 2014 ISSUE DATE A VERSION APPROVED PREPARED QA AVL Status APPROVED BY CUSTOMER： Please return one copy with approval to PSE-TW PSE Technology Corporation No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park, Chung Li City, Taoyuan County, Taiwan (R.O.C.) TEL: 886-3-451-8888 FAX: 886-3-461-3865 http://www.saronix-ecera.com.tw *Pb-free *RoHS Compliant *HF-Halogen Free *REACH Compliant Pericom Internal Reference NO. UX72F62008 E0-R-4-014 Rev. E Page i TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 VERSION HISTORY Version No. Version Date A May.14,2014 E0-R-4-014 Rev. E Customer Receipt Date Supplier Receipt Date Description Notes Initial Release Page ii TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 ELECTRICAL SPECIFICATIONS SRe Part Number : UX72F6214Z Item Symbol Specifications Units Nominal Frequency Fo 156.250000 MHz Frequency Stability FT ± 50 ppm Operating Temperature Range TR -40 to +85 °C Supply Voltage VCC +3.3 ± 10.0% V Logic Type LT LVPECL Supply Current, Output Enabled ICC/OE 85 mA Max. Supply Current, Output Disabled ICC/OD 100 μA Max. Duty Cycle (Symmetry) DC/SY 45 / 55 % Measured 50% of Waveform TR/TF 0.35 ns Max. measured 20/80% of Waveform Rise / Fall Time Notes **See note Output Voltage "0" Level VOL VCC -1.620V V Max. Output Voltage "1" Level VOH VCC -1.025V V Min. 50Ω to VCC -2V 2V Output Load RMS 0.07 / 0.1 ps Typ. / Max. 12KHz ~ 20MHz Frequency Band Jitter, Accumulated RMS(1-σ) 4 ps Typ. 20,000 Consecutive Periods Jitter, Peak to Peak Pk-Pk 30 ps Max. 100,000 Random Periods ST 2 ms Max. To 90% of final amplitude -55 to +125 °C Jitter, Phase Start Up Time Storage Temperature Range **Stability includes all combinations of Operating Temperature, Load changes, rated Input (Supply) Voltage changes, Initial Calibration Tolerance (25°C), Aging (5 years at 40°C Average Effective Ambient Temperature), Shock and Vibration. Output Enable / Disable Function Parameter Input Voltage (Pin1), Output Enable Min. Output Disable Delay E0-R-4-014 Rev. E Max. 0.8VCC 0.2VCC Input Voltage (Pin1), Output Disable (low power standby) Internal Pullup Resistance Typ. 30 Notes Units V Or Open V Output is Hi-Z KΩ 200 ns Page 1 TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 TEST CIRCUIT OUTPUT WAVEFORM E0-R-4-014 Rev. E Page 2 TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 RELIABILITY SPECIFICATIONS ENVIRONMENTAL: a) THERMAL SHOCK: MIL-STD-883, Method 1011, Condition A b) MOISTURE RESISTANCE: MIL-STD-883, Method 1004 c) VIBRATION: MIL-STD-883, Method 2007, Condition A d) RESISTANCE TO SOLDERING HEAT: J-STD-020D Table 5-2 Pb-free devices (except 2 cycles max) e) HAZARDOUS SUBSTANCE: Pb free, RoHS Compliant MECHANICAL: a) SHOCK: MIL-STD-883, Method 2002, Condition B b) SOLDERABILITY: JESD22-B102-D Method 2 (Preconditioning E) c) TERMINAL STRENGTH: MIL-STD-883, Method 2004, Test Condition D d) GROSS LEAK: MIL-STD-883, Method 1014, Condition C e) FINE LEAK: MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s f) SOLVENT RESISTANCE: MIL-STD-202, Method 215 SUGGESTED IR REFLOW PROFILE *As per IPC-JEDEC J-STD-020D For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf E0-R-4-014 Rev. E Page 3 TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 MARKING Logo SRe 156.250 PU EN ywwv Dot denotes Pin #1 Frequency Code Date & Factory Code E N y ww v PIN #1 Connection Model Series Year Code (last digit of year) Week Code Factory Code MECHANICAL DRAWINGS ( Scale:None. Dimensions are in mm.) Recommended Land Pattern* Pin Function 1 OE NC VEE OUTPUT OUTPUT N VCC 2 3 4 5 6 E0-R-4-014 Rev. E Page 4 TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 TAPE&REEL 1. 230mm minimum leafer which consist of carrier and/or tape followed by a minimum of 160mm of empty carrier tape sealed with cover tape. 2. 160mm minimum trailer of empty carrier tape sealed with cover tape. E0-R-4-014 Rev. E Page 5 TYPE UX 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR UX72F6214Z VER. A 14-May-14 PACKING Begin Close Start End 500pcs-Product Tape Inner Packing Carton Blue Qualified Label Storeroom Label Storeroom Label Storeroom Label Deliver Packing Carton (L29*W24*H30) Green Qualified Label E0-R-4-014 Rev. E Page 6