ZXLD1366DACTC

ZXLD1366 HIGH ACCURACY 1A, 60V LED DRIVER WITH AEC-Q100 Description Pin Assignments The ZXLD1366 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 60V and provides an externally adjustable output current of up to 1A. (TOP VIEW) LX 1 5 VIN GND 2 The ZXLD1366 is qualified to AEC-Q100 Grade 1, enabling operation in ambient temperatures from -40°C to +125°C. 4 ISENSE ADJ 3 The ZXLD1366 uses a high-side output current sensing circuit which uses an external resistor to set the nominal average output current. The output current can be adjusted above, or below the set value, by applying an external control signal to the 'ADJ' pin. TSOT25 (TOP VIEW) Enhanced output current dimming resolution can be achieved by applying a PWM signal to the ‘ADJ’ pin. 6 VIN LX 1 Soft-start can be forced using an external capacitor from the ADJ pin to ground. Applying a voltage of 0.2V or lower to the ADJ pin turns the output off and switches the device into a low current standby state. GND 2 5 GND ADJ 3 4 ISENSE U-DFN3030-6 V-DFN3030-6 Features              (TOP VIEW) Typically Better than 0.8% Output Current Accuracy Simple and with Low Part Count Single Pin On/Off and Brightness Control Using DC Voltage or PWM PWM Resolution up to 1000:1 High Efficiency (up to 97%) Switching Frequencies up to 1MHz Wide Input Voltage Range: 6V to 60V Inherent Open-Circuit LED Protection Available in Thermally Enhanced Green Molding Packages SO-8EP θJA = +45°C/W V-DFN3030-6 θJA = +44°C/W TSOT25 θJA = +82°C/W Totally Lead-free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green Device (Note 3) Qualified to AEC-Q100 Grade 1 An Automotive Compliant part is available under a separate datasheet (ZXLD1366Q) LX 1 8 VIN GND 2 GND 3 6 GND ADJ 4 5 ISENSE 7 GND SO-8EP Typical Application Circuit D1 Rs VIN (24V) 0.2V Applications       L1 Low Voltage Industrial Lighting LED Back-Up Lighting Illuminated Signs Emergency Lighting SELV Lighting Refrigeration Lights C1 4.7µF 100nF VIN ISEN SE ADJ ZXLD1366 LX GND GND Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain