ZXMS6002GTA

ZXMS6002G 60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE IntelliFET MOSFET WITH STATUS INDICATION Product Summary Features and Benefits  Continuous Drain Source Voltage VDS = 60V   On-State Resistance: 500mΩ Nominal Load Current (VIN = 5V): 1.4A  Clamping Energy: 550mJ            Description The ZXMS6002G is a self-protected low-side IntelliFET™ MOSFET. It features monolithic overtemperature, overcurrent, overvoltage (active clamp) and ESD-protected logic level functionality. It is intended as a general purpose switch, with status indication and programmable current limit.      Mechanical Data   Applications Especially Suited for Loads with a High In-Rush Current Such as Lamps and Motors All types of resistive, inductive and capacitive loads in switching applications μC Compatible Power Switch for 12V and 24V DC Applications Replaces electromechanical relays and discrete circuits Linear mode capability - the current-limiting protection circuitry is designed to de-activate at low VDS, in order not to compromise Status Pin (Analog Status Indication) Logic Level Input Short Circuit Protection with Auto Restart Overvoltage Protection (Active Clamp) Thermal Shutdown with Auto Restart Overcurrent Protection Input Protection (ESD) Load Dump Protection (Actively Protects Load) High Continuous Current Rating Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3)    Case: SOT223 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish e3 Weight: 0.112 grams (Approximate) SOT223 (Type DN) the load current during normal operation. The design max. DC operating current is therefore determined by the thermal capability of the package/board combination, rather than by the protection circuitry. Note: This does not compromise the product's ability to self-protect during short-circuit load conditions.   Status pin voltage reflects the gate drive being applied internally to the power MOSFET With VIN = 5V:    Top View Pin Out Top View Status Voltage: 5V indicates normal operation Status Voltage: 2V to 3V indicates that the device is in current-limiting mode Status Voltage: