0560-6600-J6

ADSL Magnetics Conexant BT8970 and BT8973 • Designed for 784 kbps and 1168 kbps HDSL applications Designed to meet IEC 950 safety requirements for supplementary insulation at 250V Minimum interwinding breakdown voltage of 1500 Vrms • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • • • • Operating temperature range: -40° C to +85° C Meets IEC 695, 2-2 flammability requirements PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning TM00307 • ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ± 2% Inductance2 mH ±6% Leakage Inductance3 µH max Line Side 11 11 DCR Ω max Chip Side 1 1 Line1 Side 2.3 2.3 Longitudinal Balance db min 40 kHz 200 kHz 53 53 Insertion Loss4 dB max 200 kHz 0.5 0.5 Frequency Response4 dB 40 kHz 200 kHz ± 0.1 ± 0.1 Harmonic Distortion4 dB max 40 kHZ 14 dBm -70 -70 Part Number Package Application Kbps Chip : Line1 S560-6600-68 0560-6600-J6 SMD THT 784 784 1:2 1:2 Line Side1 3 3 1. connect 2 to 4 2. measure at 10 kHz, 0.1V 3. connect 2 to 4 and 7 to 9 4. 135Ω line impedance Part Number Package Application Kbps Turns Ratio ± 2% Inductance2 mH ±10% Leakage Inductance3 µH max Line Side 10.5 10.5 DCR Ω max Chip Side 1 1 Line1 Side 2.55 2.55 Longitudinal Balance db min 40 kHz 300 kHz 53 53 Insertion Loss4 dB max 40 kHz 0.5 0.5 Frequency Response4 dB 40 kHz 500 kHz ± 0.1 ± 0.1 Harmonic Distortion4 dB max 40 kHZ 1.85 Vrms -70 -70 Chip : Line1 S560-6600-L7 0560-6600-60 SMD THT 1168 1168 1:2 1:2 Line Side1 2 2 1. connect 2 to 4 2. measure at 10 kHz, 0.1V 3. connect 2 to 4 and 7 to 9 4. 135Ω line impedance SCHEMATIC S560-6600-68 0560-6600-J6 S560-6600-L7 0560-6600-60 LINE SIDE 2 9 1 4 CHIP SIDE 5 7 ©2000 Bel Fuse Inc. Specifications subject to change without notice. 10.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-27 ADSL Magnetics TM00307 Conexant BT8970 and BT8973 MECHANICAL SUGGESTED PCB PAD LAYOUT 1 5 S560-6600-68 S560-6600-L7 0.741 (18.82) 0.060 (1.52) 0.028 (0.71) 0.540 (13.72) MAX 0.100 (2.54) 10 0.100 (2.54) 6 0.087 (2.21) 0.585 (14.86) MAX 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX 1 5 0560-6600-J6 0560-6600-60 10 0.550 (13.97) MAX 6 0.525 (13.34) MAX 0.500 (12.70) MAX 0.110±0.010 (2.79±0.25) 0.098 (2.50) 0.020 (0.508) SQ. TYP (PHOSPHER BRONZE, SOLDER COATED 0.394 (10.00) ©2000 Bel Fuse Inc. Specifications subject to change without notice. 10.00 CORPORATE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-28