0659P6300-16

Type 0659C / 0659P Time-lag Fuse Series (High -Breaking Capacity) 0659C/0659P Series, 5x20mm Ceramic Tube Time-Lag Fuse RoHS Compliant Description 5x20mm Time-Lag surge withstand, high breaking capacity, ceramic body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 5. Features - High breaking capacity (250V ac @1500A) - Meet IEC standard 60127-2, sheet 5 - Wide operating temperature range - Bulk and Tape & Reel packing available - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free - Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Ceramic Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”T”, ”Current Rating”, “H”,”250V”, ”Appropriate Safety Logos” Marking On Label : "bel","0659C”or”0659P",”T”,"Current Rating", “H”, "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " compliant). Electrical Characteristics (IEC-127-2 STANDARD SHEET 5) 1.5 In 2.1 In 2.75 In 4 In 10 In Rated Current MIN "(China RoHS Safety Agency Approvals Safety Agency Safety Agency Certificate MAX MIN MAX MIN MAX MIN MAX 1A to 3.15A 1 30 0.75 80 95 5 10 150 40039275 4A and above 1 30 0.75 80 150 5 10 150 hr. min. sec sec ms sec ms ms PSE21021835 PSE21021836 PSE21021840 PSE21021841 In clause 9.2, the test voltage is 125VDC. ", " Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* 1A-6.3A/250V AC@1,500A 0659C 1A-5A/250V AC@1,500A 0659C 6.3A/250V AC@1,500A 1A-6.3A/250V AC 0659P 1A-5A/250V AC@1,500A 0659P 6.3A/250V AC@1,500A 0659C: Self-declaration No: 0659P: 2020970207000297 1A-6.3A/250V AC@1,500A 1A-6.3A/250V AC E20624 1A-6.3A/250V AC@1,500A 1A-6.3A/600V AC@150A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 0659C / 0659P 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Part Number Voltage and Interrupting Ratings Melting I²T