0678H9400-02

Type 0678H Enhanced-breaking Capability Brick Fuse 0678H Series-3912 Size RoHS Compliant Features - Enhanced – Breaking capacity - Surface mount high current fuse - Current rating from 500mA to 40A - Wide operating temperature range from -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - Compatible with 260℃, IR Pb-free solder process - RoHS compliant with exemption 7(a) Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Halogen Free, (MSL=1) - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant - Voltage regulator module - PC server - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - Power supply - DC-DC converter - Mass storage systems Physical Specifications Safety Agency Approvals Body : Ceramic Materials HALOGEN FREE = Terminations : Silver Plated Caps /Palladium Plated Caps Safety Agency Safety Agency Certificate On Fuse : ”Current Rating”, “H”- laser marked on ceramic tube, “bel” stamped in end caps. Marking E20624 On Label : "bel", "0678H", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " (China RoHS compliant). ", " Electrical Characteristics (UL/CSA STD.248-14) Testing Current Blow Time Minimum Maximum 100% 4 hrs. N/A 200% N/A 60 sec " R 50544942 EN 60127-1: 2006+A1+A2 EN 60127-4: 2005+A1+A2 J 50545350 EN 60127-1: 2006+A1+A2 EN 60127-7: 2016 E20624 Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* 500mA-5A /125V@1000A AC 250V@300A AC 125V@2000A DC >5A-20A /250V@100A AC 125V@500A AC 125V@1000A DC 100V@1500A DC 500mA-40A/250V AC >20A-30A /250V@100A AC 125V@200A AC 125V DC 125V@1000A DC 35A-40A /250V@100A AC 125V@500A AC 125V@1000A DC 40A / 100V@1500A DC 35A / 100V@1500A DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 0678H Temperature Derating Curve 2/4 Average Time Current Curve Electrical Specifications Nominal Cold Nominal VoltResistance drop @100%In (ohms) (Volt) 0678H0500-XX 500mA 0.66 1.00 0678H0630-XX 630mA 0.54 1.30 0678H0800-XX 800mA 0.38 1.10 0678H1000-XX 1A 0.21 0.70 0678H1250-XX 1.25A 0.10 0.20 0678H1600-XX 1.6A 0.08 0.19 0678H2000-XX 2A 0.059 0.18 0678H2500-XX 2.5A 0.043 0.18 0678H3150-XX 3.15A 0.035 0.18 0678H4000-XX 4A 0.021 0.18 0678H5000-XX 5A 0.016 0.18 0678H6300-XX 6.3A 0.013 0.17 0678H8000-XX 8A 0.010 0.15 0678H9100-XX 10A 0.0060 0.13 0678H9150-XX 15A 0.0041 0.12 0678H9200-XX 20A 0.0028 0.09 0678H9250-XX 25A 0.0023 0.08 0678H9300-XX 30A 0.0015 0.08 0678H9350-XX 35A 0.0016 0.11 0678H9400-XX 40A 0.0015 0.11 Consult manufacturer for other ratings XX - Packaging code (see “ordering information”) Part Number Ampere Rating Voltage and Interrupting Ratings See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings Melting I²T @10 In (A²Sec) 0.03 0.06 0.08 0.3 0.4 0.5 1.0 1.8 2.8 7.8 10 20 34 90 220 420 660 2000 735 1000 Nominal Power Dissipation (W) 0.5 0.8 0.9 0.7 0.3 0.3 0.4 0.5 0.6 0.7 0.9 1.1 1.2 1.3 1.8 1.8 2.0 2.4 3.9 4.4 Agency Approvals Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y NOTES: All tests were conducted with the fuses soldered to a printed circuit boards with a nominal thickness of 1.6 mm. The copper t est circuit trace was a printed circuit with an overall length of 100 mm, copper thickness/width as described below. The printed circuit boards were mounted by screws to a test fixture having brass blocks for connection of the test leads. All samples Fuse rating Test Board Trace Dimensions were soldered to the test boards by the manufacturer. 500mA-5A 1 oz. copper, 5.0mm wide. Caution >5A-30A 3 oz. copper, 10mm wide. - Minimum fusing point: >30A-40A 3 oz. copper, 15mm wide. The 0678H Series fuse are NOT intended to be operated at currents between 100% and 200% of ampere rating. Prolonged operation at currents in this range may result in overheating of the fuse and/or desoldering of the fuse caps from the PCB pad. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2022 Bel Fuse, Inc. Rev.0678H Jun2022 Type 0678H 3/4 Environmental Specifications Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Solderability Resistance to solder Heat Thermal Shock Operating Temperature MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side (260℃, 20 sec) MIL-STD-202G, Method 210F, Test Condition D. Bottom Side (260℃, 10 sec) MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). -55℃ to +125℃ High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA-104,Test Condition B Operational life MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration Resistance to soldering heat Thermal shock MIL-STD-202 Method 204 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 temperature electrical Biased humidity MIL-STD-202 Method 210,Test condition B MIL-STD-202 Method 107 Moisture Sensitivity Level 1 (According to IPC J-Std-020) Soldering Parameters IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 150℃ 200℃ 60-120 seconds Average ramp-up rate(Tsmax to Tp) 3℃ / second max. Liquidous temperature(TL ) Time at liquidous (tL) 217℃ 60 – 150 seconds Peak temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified classification temperature (Tc) 30 seconds Average ramp-down rate(Tp to Tsmax) 6℃ / second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate Heating rate during preheat Final preheat temperature 200℃ / second typical 1 - 2℃ / second Max 4℃ / second within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2022 Bel Fuse, Inc. Rev.0678H Jun2022 Type 0678H 4/4 Fuse FGNO Explanation 0678H [XXXX] -XX 0678H=0678H Series; [XXXX]=Ampere Rating; XX=See Ordering Information as below Fraction Decimal Milliamps Bel FGNO[XXXX] 1/2 0.500 500 0500 .630 630 0630 .800 800 0800 8/10 Fraction 1-1/4 2-1/2 Mechanical Dimensions Decimal Amps Bel FGNO[XXXX] 1.0 1 1000 1.25 1.25 1250 1.60 1.6 1600 2.0 2 2000 2.5 2.5 2500 3.15 3.15 3150 4.0 4 4000 5.0 5 5000 6.3 6.3 6300 8.0 8 8000 10 9100 15 9150 20 9200 25 9250 30 9300 35 9350 40 9400 Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 16mm wide tape with 13 inches Diameter reel EIA Standard 481-E 2000 2 Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2022 Bel Fuse, Inc. Rev.0678H Jun2022