0678L9250-02

Type 0678L Square Ceramic Surface Mount Medium Blow Fuse 0678L Series-3912 Size RoHS Compliant Features - Medium blow - Surface mount high current fuse - Current rating from 10A to 30A - Wide operating temperature range from -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - Compatible with 260℃, IR Pb-free solder process - AEC-Q Compliant RoHS compliant with exemption 7(a) Halogen Free, (MSL=1) Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications - Voltage regulator module PC server Office electronic equipment Industrial equipment Medical equipment POE, POE+ - Power supply - DC-DC converter HALOGEN FREE = Physical Specifications Body : Ceramic Materials Terminations : Silver Plated Caps /Palladium Plated Caps AEC-Q Compliant On Fuse : Marking ”Current Rating”, “L” – laser marked on ceramic tube, “bel” stamped in end caps. On Label : "bel", "0678L", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " Electrical Characteristics (UL/CSA STD.248-14) Blow Time Testing Current Minimum Maximum 100% 4 hrs. N/A 200% N/A 60 sec ", " "(China RoHS compliant). Safety Agency Approvals Safety Agency Safety Agency Certificate E20624 Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 10A-30A / 250V AC 72V DC 10A-30A /250V @ 100A AC 125V @ 150A AC 72V @ 130A DC 65V @ 300A DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 0678L 2/4 Temperature Derating Curve Average Time Current Curve 15A 20A 25A 30A 10A 0678L - TIME CURRENT CHARACTERISTIC CURVE 100000 10000 TIME IN SECONDS 1000 100 10 1 0.1 0.01 10 100 CURRENT IN AMPERES Electrical Specifications Part Number Ampere Rating Nominal Cold Resistance (ohms) Nominal Volt-drop @100%In (Volt) max. 0678L9100-XX 10A 0.0056 0.18 0678L9150-XX 15A 0.0036 0.12 0678L9200-XX 20A 0.0025 0.09 0678L9250-XX 25A 0.0019 0.08 0678L9300-XX 30A 0.0013 0.07 Voltage and Interrupting Ratings See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 1000 Agency Approvals Melting I²T @10 In (A²Sec) Min. Nominal Power Dissipation (W) 50 1.8 Y 110 1.8 Y 270 1.8 Y 420 2.0 Y 1000 2.1 Y Consult manufacturer for other ratings XX-Packaging code (see “ordering information”) NOTES: Test Conditions For all 0678L data, as well as UL Component investigation, all tests were conducted with fuse samples soldered on a PCB (1.6mm thick) test board with copper traces measuring 0.1mm nominal thickness (3 oz. clad), 10mm wide and 100mm overall length. - UL Condition of Acceptability - The following information is contained in the UL Component Recognition for 0678L Fuse Series: The maximum temperature recorded in open air was 100℃ in a 21℃ ambient (79℃ rise). Consideration should be given to checking operating temperatures in end-use application with regard to thermal index of surrounding materials and components. (Maximum temperature recorded at 80% of rating (24A) for the 0678L 30 rating was 69℃ (48℃ rise). Caution : - Minimum fusing point: The 0678L Series fuse are NOT intended to be operated at currents between 100% and 200% of ampere rating. Prolonged operation at currents in this range may result in overheating of the fuse and/or desoldering of the fuse caps from the PCB pad. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev.0678L Dec2019 Type 0678L 3/4 Environmental Specifications MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) MIL-STD-202G, Method 201A (10-55 Hz, 0.06 Vibration Resistance inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B Salt Spray Resistance (48 hrs.). MIL-STD-202G, Method 302, Test Condition A Insulation Resistance (After Opening) 10,000 ohms minimum. Solderability MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side (260℃, 20 sec) Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition D. Bottom Side (260℃, 10 sec) MIL-STD-202G, Method 107G, Test Condition B Thermal Shock (-65℃ to +125℃). Shock Resistance Operating Temperature -55℃ to +125℃ High temperature storage MIL-STD-202 Method 108 Temperature cycling Operational life JESD22 Method JA-104,Test Condition B MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration Resistance to soldering heat Thermal shock MIL-STD-202 Method 204 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 temperature electrical Biased humidity MIL-STD-202 Method 210,Test condition B MIL-STD-202 Method 107 Moisture Sensitivity Level 1 (According to IPC J-Std-020) Soldering Parameters IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax ) Time (Tsmin to Tsmax ) (ts ) 150℃ 200℃ 60-120 seconds Average ramp-up rate(Tsmax to Tp) 3℃ / second max. Liquidous temperature(TL) Time at liquidous (tL) 217℃ 60 – 150 seconds Peak temperature (Tp) Time (tp) within 5℃ of the specified classification temperature (Tc ) 260℃ max 30 seconds Average ramp-down rate(Tp to Tsmax ) 6℃ / second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate Heating rate during preheat Final preheat temperature 200℃ / second typical 1 - 2℃ / second Max 4℃ / second within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev.0678L Dec2019 Type 0678L 4/4 Fuse FGNO Explanation 0678L [XXXX] -XX 0678L=0678L Series; [XXXX]=Ampere Rating; XX=See Ordering Information as below Amps Bel FGNO[XXXX] 10 9100 15 9150 20 9200 25 9250 30 9300 Mechanical Dimensions Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 16mm wide tape with 13 inches Diameter reel EIA Standard 481-E 2000 2 Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev.0678L Dec2019