0679H0375-05

Type 0679H Square Ceramic Surface Mount Quick Acting Fuse 0679H Series – 2410 Size RoHS Compliant Features - Quick Acting, 2410 SMD - Compatible with 260℃, IR Pb-free solder process - Wide range of current rating from 250mA to 15A - Wide operating temperature range, -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863, Compliant with exemption 7(a) - Halogen Free, (MSL = 1) - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications - Notebook - LCD monitor - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor - Power supply - LCD / LED TV AEC-Q Compliant Safety Agency Approvals Safety Agency Safety Agency Certificate Ampere Rating/ Voltage Rating Ampere Range / Volt @ I.R. ability* E20624 250mA–3A/350V AC 72V DC 3.5A-15A/350V AC 60V DC 250mA-3A/350V@ 50A AC 72V@100A DC 3.5A-5A/350V@50A AC 60V@150A DC 6.3A-15A/350V@50A-AC 60V@100A DC 250mA–3A/350V AC R 50368185 Tested according to 72V DC IEC 60127-1:2006+A1+A2 3.5A-15A/350V AC IEC 60127-7:2015 60V DC 250mA-3A/350V@ 50A AC 72V@100A DC 3.5A-5A/350V@50A AC 60V@150A DC 6.3A-15A/350V@50A-AC 60V@100A DC Electrical Characteristics (UL/CSA/STD. 248-14) Blow Time Testing Current Minimum Maximum 100% 4 Hrs. N/A 200% N/A 5 Sec HALOGEN FREE = *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Materials Body : Ceramic Terminations : Silver Plated Caps On Fuse : “Current Rating”, “Q”, ”H”—laser marked on ceramic tube, “bel” stamped in end caps. Marking On Label : "bel", "0679H", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type 0679H 2/4 Environmental Specifications Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Solderability Resistance to solder Heat Thermal Shock MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA-104,Test Condition B MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side (260℃,20 sec) MIL-STD-202G, Method 210F, Test Condition D. Biased humidity MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. Operational life MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration MIL-STD-202 Method 204 Resistance to soldering heat MIL-STD-202 Method 210,Test condition B Thermal shock MIL-STD-202 Method 107 Bottom Side (260℃,10 sec) MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 temperature electrical Operating Temperature -55℃ to +125℃ Moisture Sensitivity Level 1 (According to IPC J-Std-020) Electrical Specifications Agency Approvals Melting I²T