0685H9100-01

Type C1H High Current Rated Fast Acting Chip Fuse C1H Series – 1206 Size RoHS 2 Compliant Features - Quick Acting - Small size, 1206 SMD - Current rating from 10A to 30A - Wide operating temperature range from -55℃ to 125℃ - Tape and Reel for automatic SMD placement - Compatible with 260℃ IR Pb-free and wave soldering process - AEC-Q Compliant - RoHS 2 compliant (MSL = 1) - Halogen Free - Lead Free - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant - Notebook - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor and LCD / LED TV - Power supply - DC-DC Converter LEAD FREE = HALOGEN FREE = Electrical Characteristics (UL STD. 248-14) Blow Time Typical Part Marking Testing Current Fuse body (ceramic white side) marked with marking code. 100% 4 Hrs. N/A Example: 350% N/A 5 Sec Minimum Maximum Safety Agency Approvals Safety Agency Safety Agency Certificate E20624 Current Rating Marking Code Current Rating Marking Code 10A 10 20A 20 12A 12 25A 25 15A 15 30A 30 Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 10A - 30A / 32V DC 125V AC 10A - 15A / 32V @150A DC 125V @150A AC 20A - 30A / 32V @300A DC 125V @150A AC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Substrate Materials Terminations : Ag / Ni / Sn (100% Lead-free) Element Cover Coating : Lead-free Glass On Fuse : “Marking Code” in blue color Marking On Label : "bel", "C1H", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type C1H 2/4 Temperature Derating Curve Average Time Current Curve Electrical Specifications Marking Code Nominal Cold Resistance (ohms) Maximum Volt-drop @100% In (Volt) max. 10A 10 0.0039 0.047 0685H9120-XX 12A 12 0.0032 0.047 0685H9150-XX 15A 15 0.0026 0.050 0685H9200-XX 20A 20 0.0019 0.052 0685H9250-XX 25A 25 0.0014 0.050 0685H9300-XX 30A 30 0.0011 0.053 Part Number Ampere Rating (A) 0685H9100-XX Voltage and Interrupting Ratings See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings Agency Approvals Nominal Melting I²T @10 In (A² Sec) Maximum Power Dissipation @100% In (W) 5.9 0.47 Y 8.0 0.56 Y 13.5 0.75 Y 28.5 1.04 Y 53.4 1.25 Y 80.5 1.59 Y Consult manufacturer for other ratings NOTES: Test Conditions All C1H test, as well as the UL Component investigation, were conducted with fuse samples soldered on a PCB (1.6mm thick) test board with copper traces measuring 0.1 mm (100μum) nominal thickness (3 oz.clad), 10mm wide and 100 mm overall length. Device designed to be mounted with marking facing up. Device designed to carry rated current for 4 hours minimum. It is recommended that device be operated continuously at no more than 80% of rated current when in a +25°C ambient, with further derating at elevated ambient temperatures. Caution Minimum fusing point C1H Series fuses are NOT intended to be operated at currents between 100% and 350% of ampere rating. Prolonged operation at currents in this range may result in overheating of the fuse and/or desoldering of the fuse from the PCB pad. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C1H Jan2019 Type C1H 3/4 Environmental Specifications Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Solderability Resistance to solder Heat Thermal Shock Operating Temperature Moisture Sensitivity Level MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA -104,Test Condition B MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side(260℃,20 sec) MIL-STD-202G, Method 210F, Test Condition D. Bottom Side(260℃,10 sec) MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Biased humidity MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs . Operational life MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration MIL-STD-202 Method 204 Resistance to soldering heat MIL-STD-202 Method 210,Test condition B Thermal shock MIL-STD-202 Method 107 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 -55℃ to +125℃ Terminal strength AEC-Q200-006 1 (According to IPC J-Std-020) Electrical characterization 3 temperature electrical Soldering Parameters IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 150℃ 200℃ 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3℃/second max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60-150 seconds Peak temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified classification temperture (Tc) 30 seconds Average ramp-down rate (Tp to Tsmax) 6℃/second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate Heating rate during preheat Final preheat temperature 200℃ / second typical 1 - 2℃ / second Max 4℃ / second within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C1H Jan2019 Type C1H 4/4 Fuse FGNO Explanation 0685 H [XXXX] -XX 0685H=C1H; [XXXX]=Ampere Rating; XX=See Ordering Information as below Amps Bel FGNO[XXXX] 10 9100 12 9120 15 9150 20 9200 25 9250 30 9300 Mechanical Dimensions Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 8 mm wide tape with 7 inches Diameter reel EIA Standard 481-E 5000 0685HXXXX-01 Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2019 Bel Fuse, Inc. Rev. C1H Jan2019