0685P9400-01

Type 0685P Surface Mount Fast Acting Chip Fuse 0685P Series – 1206 Size RoHS 2 Compliant Features - Fast Acting, with improved surge withstand performance - Small size, 1206 SMD - Current rating from 2A to 50A, fuse marked with ampere code - Wide operating temperature range from -55℃ to 125℃ - Tape and Reel for automatic SMD placement - Compatible with 260℃ IR Pb-free and wave soldering process - AEC-Q Compliant - RoHS 2 compliant (MSL = 1) - Halogen Free - Lead Free - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications AEC-Q Compliant Typical Part Marking Fuse body (ceramic white side) marked with marking code. Example: - Automotive Navigation System - Thin film transistor LCD flat-panel display screen - Notebook - PC computer - Office electronic equipment - Industrial equipment - Medical equipment - POE, POE+ - LCD / LED monitor - Power supply - LCD / LED TV - DC-DC Converter LEAD FREE = HALOGEN FREE = Electrical Characteristics (UL STD. 248-14) Blow Time Amp Rating Testing Current Minimum Maximum 2A-50A 100% 4 Hrs. N/A 2A-8A 250% N/A 5 Sec 10A-50A 350% N/A 5 Sec Safety Agency Approvals Safety Agency Safety Agency Certificate Voltage Rating (V) 2A–8A/50A@50VAC 2A–8A/50V AC /100A@63V DC /63V DC E20624 >8A-25A/150A@50V DC >8A-30A/50V DC >30A-50A/32V DC 2A 2 10A 10 2.5A T 12A 12 3A 3 15A 15 3.5A Z 20A 20 4A 4 25A 25 5A 5 30A 30 6A 6 40A 40 7A 7 50A 50 8A 8 Ampere Range / Volt @ I.R. ability* >25A-30A/250A @50V DC >30A-50A/200A@32V DC *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Physical Specifications Body : Ceramic Substrate Materials Terminations : Ag / Ni / Sn (100% Lead-free) Element Cover Coating : Lead-free Glass On Fuse : Marking Code Marking On Label : "bel", "0685P", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Specifications subject to change without notice belfuse.com/circuit-protection Type 0685P 2/4 Temperature Derating Curve Average Time Current Curve 0685P - TIME CURRENT CHARACTERISTIC CURVE 100 10 TIME IN SECONDS 1 0.1 0.01 0.001 0.1 1 Electrical Specifications Part Number Ampere Rating (A) Marking Code 2 0685P2000-01 2 T 0685P2500-01 2.5 3 0685P3000-01 3 0685P3500-01 3.5 Z 0685P4000-01 4 4 0685P5000-01 5 5 0685P6000-01 6 6 0685P7000-01 7 7 0685P8000-01 8 8 0685P9100-01 10 10 12 0685P9120-01 12 15 0685P9150-01 15 20 0685P9200-01 20 25 0685P9250-01 25 30 0685P9300-01 30 0685P9400-01 40 40 0685P9500-01 50 50 Consult manufacturer for other ratings NOTES: Test Conditions 10 100 1000 CURRENT IN AMPERES Nominal Cold Resistance (mohms) Maximum Volt-drop @100% In (Volt) max. 115.0 82.0 60.0 50.0 40.0 26.0 20.0 16.0 11.5 5.70 4.60 3.40 2.20 1.60 1.30 1.05 0.80 0.370 0.305 0.270 0.240 0.210 0.205 0.166 0.159 0.128 0.065 0.065 0.065 0.050 0.050 0.050 0.054 0.072 Voltage and Interrupting Ratings Nominal Melting I²T @10 In (A² Sec) See Table of Safety Approvals on Page 1 for Voltage and associated Interrupting Ratings 0.2 0.6 1.3 2.6 4.0 4.1 8.0 12.5 19 25 48 80 100 225 255 320 500 Maximum Power Dissipation @100% In (W) 0.74 0.76 0.81 0.84 0.84 1.03 1.00 1.11 1.02 0.65 0.78 0.98 1.00 1.25 1.50 2.16 3.60 Agency Approvals Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y All test were conducted with the fuses soldered to a PCB with a nominal thickness of 1.6mm with copper traces measuring 100mm overall length. Copper trace/width as described below. Device designed to be mounted with marking facing up. Device designed to carry rated current for 4 hours minimum. It is recommended that device be operated continuously at no more than 80% of rated current when in a +25°C ambient, with further derating at elevated ambient temperatures. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2021 Bel Fuse, Inc. Rev. 0685PApr2021 Type 0685P 3/4 Environmental Specifications Shock Resistance Vibration Resistance Salt Spray Resistance Insulation Resistance Solderability Resistance to solder Heat Thermal Shock Operating Temperature Moisture Sensitivity Level MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) High temperature storage MIL-STD-202 Method 108 Temperature cycling JESD22 Method JA-104,Test Condition B MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). MIL-STD-202G, Method 101E, Test Condition B (48 hrs.). MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. MIL-STD-202G, Method 208H MIL-STD-202G, Method 210F, Test Condition C. Top Side(260℃,20 sec) MIL-STD-202G, Method 210F, Test Condition D. Bottom Side(260℃,10 sec) MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Biased humidity -55℃ to +125℃ Operational life MIL-STD-202 Method 103, 85C/85% RH with 10% operating power for 1000 hrs. MIL-STD-202 Method 108, Test Condition D Resistance to solvents MIL-STD-202 Method 215 Mechanical shock MIL-STD-202 Method 213,Test Condition C Vibration Resistance to soldering heat Thermal shock MIL-STD-202 Method 204 Solderability J-STD-002 Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Electrical characterization 3 temperature electrical MIL-STD-202 Method 210,Test condition B MIL-STD-202 Method 107 1 (According to IPC J-Std-020) Soldering Parameters IR Reflow Profile (IPC/JEDEC J-STD-020D) Preheat & Soak Temperature min (Tsmin) 150℃ Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 200℃ 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3℃/second max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60-150 seconds Peak temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified classification temperature (Tc) 30 seconds Average ramp-down rate (Tp to Tsmax) 6℃/second max. Time 25℃ to peak temperature 8 minutes max. Lead-free Wave Soldering Profile Wave Soldering Parameter Average ramp-up rate Heating rate during preheat 200℃ / second typical 1 - 2℃ / second Max 4℃ / second Final preheat temperature within 125℃ of soldering temperature Peak temperature Tp 260℃ Time within +0℃ / -5℃ of actual peak temperature 10 seconds Ramp-down rate 5℃ / second max. Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2021 Bel Fuse, Inc. Rev. 0685PApr2021 Type 0685P 4/4 Fuse FGNO Explanation 0685 P [XXXX] -XX 0685P=0685P; [XXXX]=Ampere Rating; XX=See Ordering Information as below Amps Bel FGNO[XXXX] Amps Bel FGNO[XXXX] 2 2000 10 9100 2.5 2500 12 9120 3 3000 15 9150 3.5 3500 20 9200 4 4000 25 9250 5 5000 30 9300 6 6000 40 9400 7 7000 50 9500 8 8000 Mechanical Dimensions Ordering Information Packaging Packaging Tape & Reel Packaging Specification Quantity Quantity & Packaging Code 8 mm wide tape with 7 inches Diameter reel EIA Standard 481-E 5000 0685PXXXX-01 Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2021 Bel Fuse, Inc. Rev. 0685PApr2021