0813-1X4T-23

INTEGRATED CONNECTOR MODULES Gigabit belStick™ • Quad port shielded RJ-45 connector with integrated Gigabit Ethernet magnetics Compatible with a variety of Gigabit Ethernet transceiver ICs and 10/100Base-TX transceiver ICs Operating temperature 0° to +70° C • • Storage temperature -40° to +85° C Adaptable, modular design provides higher reliability • BM01813 Complies with IEEE 802.3ab standards and all Gigabit Ethernet specifications Integrated design conserves valuable board space Minimum interwinding breakdown voltage of 1500 Vrms • • • • ELECTRICAL SPECIFICATIONS AT 25° C Common to Differential Mode Rejection dB min 100KHz to 100MHz -40 Common to Common Mode Rejection dB min 100KHz to 100MHz -30 33 - 20 log (f/50MHz) 1500 Insertion Loss dB max Part Number 0.1MHz to 100MHz 0813-1X4T-23 -1.0 Return Loss dB min Crosstalk dB min Hipot Vrms min 0.5MHz to 40MHz -18 40MHz to 100MHz 12 - 20 log (f/80 MHz) SCHEMATIC 0813-1X4T-23 Chip Side 11 12 10 4 6 5 3 1 2 8 7 9 1CT : 1CT 1CT : 1CT 1CT : 1CT 1CT : 1CT Line Side RJ45 1 2 3 6 Available Options 4 5 7 8 75Ω x4 1000pF 2kV • Various transformer turns ratios • Various high voltage capacitor values Shield ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 INTEGRATED CONNECTOR MODULES BM01813 Gigabit belStick™ Notes Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy MECHANICAL 0813-1X4T-23 2.415 ±0.020 [61.34 ±0.51] Pin 1 2.311 [58.70] max 1.200 [30.48] 0.015 [0.38] 0.125 [3.18] 0.536 ±0.010 0.591 ±0.010 [13.61 ±0.25] [15.01 ±0.25] 0.145 [3.68] 0.550 [13.97] Pitch Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. 0.305 [7.75] 0.125 [3.18] 0.450 [11.43] 0.725 [18.42] 0.825 [20.96] PAD LAYOUT 0.068 [1.71] 0.125 [3.18] 0.825 [20.96] 0.450 [11.43] 2.285 [58.04] 2.150 [54.61] 0.550 [13.97] Pitch ø0.062 [ø1.57] 4 places ø0.128 [ø3.25] 2 places 0.725 [18.42] 1 7 0.050 [1.27] 61 12 7 61 12 7 61 12 7 6 12 0.040 [1.02] 0.080 [2.03] Suggested PCB Pad Layout Component Side View ø0.035 [ø0.89] 48 places 2.350 [59.69] 0.080 [2.03] 0.566 [14.38] Suggested Panel Opening ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2