0863-2H4R-54

INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ with LEDs BM02833 • Multi-port shielded RJ-45 connector with integrated Gigabit Ethernet magnetics Compatible with a variety of Gigabit Ethernet transceiver ICs and 10/100Base-TX transceiver ICs Operating temperature 0° to +70° C • Complies with IEEE 802.3ab standards and all Gigabit Ethernet specifications Integrated design conserves valuable board space Minimum interwinding breakdown voltage of 1500 Vrms Adaptable, modular design provides higher reliability • • • • • • Storage temperature -40° to +85° C ELECTRICAL SPECIFICATIONS AT 25° C Insertion Loss dB max Part Number 0.1MHz to 100MHz 0863-2H4R-54 -1.0 0.5MHz to 40MHz -18 40MHz to 100MHz 12 - 20 log (f/80 MHz) 12 - 20 log (f/80 MHz) 12 - 20 log (f/80 MHz) Return Loss dB min Common to Differential Mode Rejection dB min 100KHz to 100MHz -35 Common to Common Mode Rejection dB min 100KHz to 100MHz -30 33 - 20 log (f/100MHz) 33 - 20 log (f/100MHz) 33 - 20 log (f/100MHz) 1500 Crosstalk dB min Hipot Vrms min 0863-2H6R-54 -1.0 -18 -35 -30 1500 0863-2H8R-54 -1.0 -18 -35 -30 1500 Available Options • Various transformer turns ratios • Various high voltage capacitor values • Various LED color combinations ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 INTEGRATED CONNECTOR MODULES BM02833 2 x n Multi-port Gigabit belStack™ with LEDs SCHEMATIC 0863-2H4R-54 0863-2H6R-54 0863-2H8R-54 Green 11 Common 12 Orange 13 LED 1 2 3 4 5 6 7 8 1CT : 1CT RJ45 1 2 1CT : 1CT 3 6 1CT : 1CT 4 5 1CT : 1CT 7 8 0.1µF x4 9 10 Shield 75Ω x4 1000pF 2kV ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ with LEDs MECHANICAL 0863-2H4R-54 BM02833 1.220 [30.99] max Outer Shield 1.004 [25.50] max 2.330 [59.18] Port 2 LED for Lower Port LED for Upper Port Port 8 Note * 0.150 [3.81] 0.125 [3.18] Housing 0.425 [10.80] 0.185 [4.70] Port 1 2.100 [53.34] Port 7 Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. 0.550 [13.97] typical Notes Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy Packing Quantity 20 pieces finished goods per tray 7 trays per carton box for a total of 140 pieces of finished goods *Jack cavity conforms to FCC rules and regulations, part 68, subpart F. 2.365 +0.010/-0.005 [60.07 +0.25/-0.13] Metal Panel 0.085 ±0.010 [2.16 ±0.25] 1.030 +0.010/-0.005 [26.16 +0.25/-0.13] 0.015 [0.38] Suggested Panel Opening PCB ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 INTEGRATED CONNECTOR MODULES BM02833 2 x n Multi-port Gigabit belStack™ with LEDs 2.005 [50.93] 1.455 [36.96] 0.080 [2.03] 0.070 [1.78] 0.905 [22.99] 0.355 [9.02] 0.160 [4.06] 0.050 [1.27] 0.015 [0.38] 0.100 [2.54] 0.100 [2.54] 0.010 [0.25] ø0.035 [ø0.89] 80 places 0.450 [11.43] ø0.045 [ø1.14] 24 places ø0.082 [ø2.08] 4 places 0.727 [18.47] 0.610 [15.49] 0.100 [2.54] 0.050 [1.27] 0.185 [4.70] 0.180 [4.57] 0.110 [2.79] 0.290 [7.37] ø0.128 [ø3.25] 2 places R0.030 [R0.76] 2.100 [53.34] Suggested PCB Pad Layout Component Side View 0.110 [2.79] Recommended PCB front edge cutout. The bottom shield ground tabs (front) should not be seated on the top of the PCB. Lower Deck 11 12 13 13 12 11 10 9 7 5 3 1 8 6 4 2 10 8 6 4 2 9 7 5 3 1 Upper Deck Port 1 2 3 4 5 6 7 8 2.090 [53.09] 1.120 [28.45] 0.535 [13.59] 0.425 [10.80] 0.145 [3.68] 2.390 [60.71] ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ with LEDs MECHANICAL 0863-2H6R-54 1.220 [30.99] max Outer Shield 3.430 [87.12] Port 2 LED for Lower Port 1.004 [25.50] max LED for Upper Port Port 12 BM02833 Note * 0.150 [3.81] 0.125 [3.18] Port 1 Housing 0.425 [10.80] 0.185 [4.70] 3.200 [81.28] Port 11 Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. 0.550 [13.97] typical Notes Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy Packing Quantity 15 pieces finished goods per tray 7 trays per carton box for a total of 105 pieces of finished goods *Jack cavity conforms to FCC rules and regulations, part 68, subpart F. 3.465 +0.010/-0.005 [88.01 +0.25/-0.13] Metal Panel 0.085 ±0.010 [2.16 ±0.25] 1.030 +0.010/-0.005 [26.16 +0.25/-0.13] 0.015 [0.38] Suggested Panel Opening PCB ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 INTEGRATED CONNECTOR MODULES BM02833 2 x n Multi-port Gigabit belStack™ with LEDs PAD LAYOUT 0863-2H6R-54 3.105 [78.87] 2.555 [64.90] 0.080 [2.03] 0.070 [1.78] 2.005 [50.93] 1.455 [36.96] 0.905 [22.99] 0.355 [9.02] 0.160 [4.06] 0.050 [1.27] 0.100 [2.54] 0.100 [2.54] 0.010 [0.25] ø0.045 [ø1.14] 36 places ø0.082 [ø2.08] 4 places 0.015 [0.38] ø0.035 [ø0.89] 120 places 0.450 [11.43] 0.727 [18.47] 0.610 [15.49] 0.100 [2.54] 0.050 [1.27] 0.185 [4.70] 0.180 [4.57] 0.110 [2.79] ø0.128 [ø3.25] 2 places R0.030 [R0.76] 0.290 [7.37] 3.200 [81.28] 0.110 [2.79] Recommended PCB front edge cutout. The bottom shield groundtabs (front) should not be seated on the top of the PCB. Lower Deck 11 12 13 13 12 11 10 10 Upper Deck Suggested PCB Pad Layout Component SIde View Port 1 2 3 4 5 6 7 8 9 10 11 12 9 7 5 3 1 8 6 4 2 8 6 4 2 9 7 5 3 1 3.190 [81.03] Notes The shaded area of bottom side of part may be covered by metal shield. 1.120 [28.45] 0.535 [13.59] 0.425 [10.80] 0.145 [3.68] 3.490 [88.65] ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ with LEDs BM02833 MECHANICAL 0863-2H8R-54 1.220 [30.99] max Outer Shield 1.004 [25.50] max 0.150 [3.81] 0.125 [3.18] Housing 4.530 [115.06] Port 2 LED for Lower Port LED for Upper Port Port 16 Note * Port 1 0.425 [10.80] 0.185 [4.70] 4.300 [109.22] Port 15 Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. 0.550 [13.97] typical Notes Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy Packing Quantity 10 pieces finished goods per tray 7 trays per carton box for a total of 70 pieces of finished goods *Jack cavity conforms to FCC rules and regulations, part 68, subpart F. 4.565 +0.010/-0.005 [115.95 +0.25/-0.13] Metal Panel 0.085 ±0.010 [2.16 ±0.25] 1.030 +0.010/-0.005 [26.16 +0.25/-0.13] 0.015 [0.38] Suggested Panel Opening PCB ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 INTEGRATED CONNECTOR MODULES BM02833 2 x n Multi-port Gigabit belStack™ with LEDs 4.205 [106.81] 3.655 [92.84] 3.105 [78.87] 2.555 [64.90] 2.005 [50.93] 1.455 [36.96] 0.905 [22.99] 0.355 [9.02] 0.160 [4.06] 0.050 [1.27] PAD LAYOUT 0863-2H8R-54 0.080 [2.03] 0.070 [1.78] 0.100 [2.54] 0.100 [2.54] ø0.045 [ø1.14] 48 places ø0.082 [ø2.08] 4 places 0.015 [0.38] ø0.035 [ø0.89] 160 places 0.450 [11.43] 0.727 [18.47] 0.610 [15.49] 0.100 [2.54] 0.050 [1.27] 0.185 [4.70] 0.180 [4.57] 0.110 [2.79] ø0.128 [ø3.25] 2 places 0.290 [7.37] R0.030 [R0.76] 0.110 [2.79] 4.300 [109.22] Suggested PCB Pad Layout Component SIde View Recommended PCB front edge cutout. The bottom shield groundtabs (front) should not be seated on the top of the PCB. Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Lower Deck 11 12 13 13 12 11 10 10 Upper Deck 9 7 5 3 1 8 6 4 2 8 6 4 2 9 7 5 3 1 4.290 [108.97] Notes The shaded area of bottom side of part may be covered by metal shield. 1.120 [28.45] 0.535 [13.59] 0.425 [10.80] 0.145 [3.68] 4.590 [116.95] ©2002 Bel Fuse Inc. Specifications subject to change without notice. 06.02 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 8