0ZRA

defining a degree of excellence Radial Leaded PTC 0ZRA1007D 0ZRA Series RoHS6 Compliant Electrical Characteristics (23°C) Application High Current Applications Product Features Very High Hold Currents, Low DCR Resistance Operating (Hold Current) Range 3 A ~ 14A Maximum Voltage 16V Temperature Range -40°C to 85°C Agency Approval TUV (Std. EN60738-1-1, Cert. R50102187) UL Component (Std. UL1434, File E305051) UL Conditions of Acceptability: 1.These devices have been investigated for use in safety circuits and are suitable as a limiting device. Product Dimensions All dimensions in mm Hold current-maximum current at which the device will not trip in still air at 23°C. IH Trip current-minimum current at which the device will always trip in still air at 23°C. IT Imax Maximum fault current device can withstand without damage at rated voltage (Vmax). Vmax Maximum voltage device can withstand without damage at its rated current. Typical power dissipated by device when in tripped state in 23°C still air environment. Pd Rmin Minimum device resistance at 23°C. Rmax Maximum device resistance at 23°C. R1max Maximum device resistance at 23°C, 1 hour after initial device trip. Physical specifications Lead material ø 0ZRA0300 ~ 0ZRA1100 - Tin plated copper, 20 AWG. 0ZRA1200 ~ 0ZRA1400 - Tin plated copper, 18 AWG. Soldering characteristics MIL-STD-202, Method 208E. Insulating coating Flame retardant epoxy, meets UL-94-V-0 requirements. PTC Marking “bel” or “b”, IH code and “RA”. Standard Package Specifications subject to change without notice Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel:201 - 432 - 0463 • Fax:201 - 432 - 9542 • E-Mail: belfuse@belfuse.com Website:www.belfuse.com defining a degree of excellence Radial Leaded PTC 0ZRA Series Typical Time - To - Trip at 23°C RoHS6 Compliant 0ZRA1007C (See Elec. Characteristics Table for P/N - Curve Correlation) ABCDEFGHIJK Time - To - Trip (S) Fault Current (A) Cautionary Notes Thermal Derating Curve 1. Operation beyond the specified maximum ratings or improper use may result in damage 2. These Polymer PTC (PPTC) devices are intended for protection against occasional overcurrent/ overtemperature fault conditions and may not be suitable for use in applications where repeated and/ or prolonged fault conditions are anticipated. 3. Avoid contact of PTC device with chemical solvent. Prolonged contact may adversely impact the PTC performance. 4. These PTC devices may not be suitable for use in circuits with a large inductance, as the PTC trip can generate circuit voltage spikes above the PTC rated voltage. Ambient Temperature (°C) Specifications subject to change without notice Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Percent Of Rated Hold And Trip Current Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Industriestrasse 20 61381 Friedrichdorf Germany Tel: 49.6172.9552.0 Fax: 49.6172.9552.40 Bel Stewart GmbH